Radiomaster TX16S MKII Gimbal V4 adjustments: stick tension, travel limit, modes & throttle friction
Vložit
- čas přidán 13. 07. 2024
- 👍 If you LIKE what you see and want to SUPPORT the channel, you can join my PATREON mutefpv.com/patreon or tip my 'piggy bank' via PAYPAL mutefpv.com/paypal
-------------
🔶 You can also use the following affiliate links and BOOKMARK the links at the end of this description - I get a small kickback if you decide to buy something and it costs NOTHING extra to you.
-------------
🔔 SUBSCRIBE for more unique content! mutefpv.com/subscribe
_________
The second version of the Radiomaster TX16S radio controller is out, with lots of improvements over the first, very successful version.
In this video you will find all the adjustments for the V4.0 hall sensor gimbals. They can be done externally, without the need to open the shell of the radio. All you need is a 1.5mm hex driver and a philips-head screwdriver.
More TX16S videos will follow, as usual ;)
( for the latest prices check the links below )
👉 Radiomaster TX16S Mark II radio controller with V4.0 or AG01 CNC gimbals:
mutefpv.com/b8a5h (RM)
mutefpv.com/733hs (BG)
mutefpv.com/ei8xc (BG)
mutefpv.com/l7xsq (GET)
mutefpv.com/md3eg (GET)
mutefpv.com/g5ihn (GET)
mutefpv.com/jcuwv (GET)
mutefpv.com/tg3i2 (AE)
mutefpv.com/e2q7c (AE)
👉 Radiomaster TX16S Mark II MAX version with V4.0 or AG01 CNC gimbals:
mutefpv.com/adhay (RM)
mutefpv.com/gw1sw (BG)
mutefpv.com/qvy4a (BG)
mutefpv.com/sb3w3 (GET)
mutefpv.com/74ict (GET)
mutefpv.com/dqnzk (GET)
mutefpv.com/1i9yd (GET)
👉 Radiomaster TX16S Mark II JOSHUA BARDWELL version with V4.0 gimbals:
mutefpv.com/t1ubd (RM)
mutefpv.com/nodtm (GET)
👉 Radiomaster TX16S Mark II MCK & LUMENIER versions with AG01 CNC gimbals:
mutefpv.com/m6auo (RM)
mutefpv.com/6fm2j (BG)
mutefpv.com/p6tce (GET)
mutefpv.com/ugmlu (GET)
👉 Customize your radio by selecting various components: mutefpv.com/sshio (RM)
👉 AG01 CNC gimbals:
mutefpv.com/ux73j (BG)
mutefpv.com/j4y0m (RM)
mutefpv.com/oedyi (GET)
mutefpv.com/n6mlj (AE)
mutefpv.com/782qe (AE)
👉 My 3D designs for the TX16S radio:
mutefpv.com/7qb4y (TV)
mutefpv.com/88mfb (TG)
👉 Sticky360 gimbal stick ends:
mutefpv.com/x1vrx (RM)
mutefpv.com/zcv4v (AE)
mutefpv.com/v7v28 (AE)
You may also want to watch:
👉 Make your TX16S unique: mutefpv.com/u6rc7 (YT)
👉 TX16S MODS part 1: mutefpv.com/mcqpr (YT)
👉 TX16S MODS part 2: mutefpv.com/iuqqg (YT)
👉 TX16S MODS part 3: mutefpv.com/zwv7e (YT)
👉 Playlist for the Radiomaster TX16S radio: mutefpv.com/4tjyu (YT)
👉 AG01 CNC gimbal installation: mutefpv.com/yd7sw (YT)
👉 AG01 CNC gimbal adjustments: mutefpv.com/zg94b (YT)
Legend:
AE = AliExpress
BG = Banggood
GET = GetFPV
RM = Radiomaster
TV = Thingiverse
TG = Thangs
INDEX
00:00 Cheat sheets
00:22 Stick travel limits (endstops)
01:04 Horizontal axis spring tension
02:02 Self centering (mode change)
02:40 Vertical axis spring tension
03:18 Throttle friction & ratcheting
05:25 Support
👍 PLEASE SUPPORT the MuteFPV channel:
-------
👍 Join my PATREON: mutefpv.com/patreon
👍 Tip my 'piggy bank' via PAYPAL: mutefpv.com/paypal
👍 Save and use these BOOKMARKS before purchasing new goodies (please bookmark the SHORTLINKS in your browser):
BANGGOOD: mutefpv.com/banggood
AMAZON (ad): mutefpv.com/amazon
GETFPV (use coupon DRJTQEDJLRS4 for -5% OFF!): mutefpv.com/getfpv
EBAY: mutefpv.com/ebay
ALIEXPRESS: mutefpv.com/aliexpress
REELSTEADY: mutefpv.com/reelsteady
👍 THANK YOU in advance for your support!
(As an Amazon Associate I earn from qualifying purchases.)
-------
Music: Jules Gaia - Bad Habits
Find the track here: mutefpv.com/epidemic
#muteFPV
#Radiomaster
#TX16S
INDEX
00:00 Cheat sheets
00:22 Stick travel limits (endstops)
01:04 Horizontal axis spring tension
02:02 Self centering (mode change)
02:40 Vertical axis spring tension
03:18 Throttle friction & ratcheting
05:25 Support
👍 PLEASE SUPPORT the MuteFPV channel:
-------
👍 Join my PATREON: mutefpv.com/patreon
👍 Tip my 'piggy bank' via PAYPAL: mutefpv.com/paypal
👍 Save and use these BOOKMARKS before purchasing new goodies (please bookmark the SHORTLINKS in your browser):
BANGGOOD: mutefpv.com/banggood
AMAZON (ad): mutefpv.com/amazon
GETFPV (use coupon DRJTQEDJLRS4 for -5% OFF!): mutefpv.com/getfpv
EBAY: mutefpv.com/ebay
ALIEXPRESS: mutefpv.com/aliexpress
More info in the video description, as always!
THANK YOU
No idea about the spring stiffness, sorry :)
I was surprised when the manual didn't mention how to change the tension. This helped a lot.
I am glad it did, thank you!
The best part is turning some these and having no noticeable difference made on my brand new controller
That sounds very strange. If you loosen completely, does the stick flop freely around the center (meaning that the spring has gotten completely loose)? Which screws feel like doing nothing?
@@muteFPV it did not. When I loosened every screw, the gimbal would stay wherever I left it.
I took the controller apart and found out that the bendy thing that adds friction was making full on contact. The screw holding it was tightened to max.
I just loosened that screw a bit and now all adjustment screws are working right.
Thank you for the feedback and I am glad you sorted it out. This would be my suggestion, to open it and see the gimbals from the back side. Did the radio ship with the throttle ratchet engaged or disengaged?
@@muteFPV Ratchet was disengaged. Friction bar next to it was maximum engaged.
I'm wondering now tho. Is there a way to further limit vertical and/or horizontal travel? From inside/back of radio?
I've got vertical travel maximum restricted from the front of the radio but it's still a bit much for me, and horizontal travel cannot be limited from the front/outside of radio.
BTW I've got the tx16s mk2 JB edition specifically
Ok I suppose they wanted to avoid throttle stick moving on its own weight so they preferred to put much more friction than necessary...
As for the stick travel, you could probably use longer screws for the vertical travel. For the horizontal I have never thought about it... First idea that comes to mind is some kind of 3d printed gimbal ring that limits the stick movement exactly where you want. I don't think if any way that you can reduce the horizontal travel from the back of the gimbal but I will give it some thought.
Shorter gimbal sticks would also help reaching the full stick deflection with a smaller movement.
Thank you so much for doing this video the first 10 seconds are invaluable!
Thank you very much!
Excellent tutorial, mate! Thanks a lot! 😃
Stay safe there with your family! 🖖😊
Thank you very much, you too!
Thank you for posting this !!!
Glad you found it useful!
Thank you I've been looking for radio front labeling of this radio.
You're welcome!
Thank you very much for making this video!
I simply could not find this information anywhere on the web nor did youtube revies mentions which screw does what precisely
I am very happy you found it helpful!
Thanks for the video
You're welcome!
Great content!
Thank you very much!
Perfect, thank you!
You're welcome, I am glad you liked it!
Great video!
Thank you very much!
Cool job. Thank you
Thank you!
very helpful thanks.
You're welcome!
Like the music and overall presentation...👍 Never noted driver type/size tho......😁 Thanks
Thank you very much. You are right, I had the footage in my other video and was 100% sure I had included it in this edit as well, my bad :( czcams.com/video/nVgwxvfr1f4/video.html
I added the necessary information in the video description, thank you once again
Awesome! Thanks for that 👍🏁
Great video,.....could U tell me what size the hex heads are for the throttle friction, thanks
That's brilliant thanks. There appears to be no way to lock in a new stick height?
Glad you found it useful! There are 2 grub screws included with the radio, which you can screw to secure the stick ends to any height. The stick ends are 2-piece but I always add the grub screws anyway, unless the stick ends are screwed in all the way or I have used spacers or something similar.
Great video! Although how do we reduce the center "bump"? More so on the horizontal axis rolling left to right vis versa, there's a harsh bump in the center. Any advice? Cheers
did you ever figure this out?
@@rbOthree kinda not really. Been a while since I played with it, but I did loosen up the sticks and got thumb grippies. Changed the rates for my whoop and got use to it.
is is the same for ag01 gimbals
Hi I loved the video! I was wondering, is it possible to add the spring tension on the vertical axis of the left gimbal? I want to buy it but don't know if I can use it for both helicopters and trucks/cars (by adding or removing tension on the throttle stick). Thank you
Hello and thank you! Yes, you can enable self-centering on the left gimbal, loosen its friction bar and adjust its spring tension. These gimbals are made so that you can change flying modes (have the throttle on the left or right), so both have a spring on the vertical axis ready to be used for stick tension.
@@muteFPV Thank you very much for your quick reply. So basically they are same gimbals and I don't need to add any extra parts? It just needs to be adjusted with a screwdriver and that's it? Thanks a million!
Yep, exactly. Although I would probably not use friction at all if you want to switch back and forth faster. This way you will only have to engage/disengage self centering. I am sure there can be ways to hack the whole assembly and do it faster, without the need to screw/unscrew. It depends on how often you will need to do this...
@@muteFPV For the moment I'm setting up a Tamiya truck with which I want to play with my son, and later on I want to add a Trex heli. I don't need to switch fast, I will either use one or the other but I wasn't sure I could get the throttle stick to return to neutral (with the spring) the exact same way it does on the right stick. Well I placed the order and can't wait for it to be delivered..
I am sure you will enjoy it, Radiomaster has done a lot of stuff right with the TX16S and the MKII is even better!
Silly question
In mode 2 should the left stick (throttle) have spring tension downward?
I keep leaving the throttle up with unintentional results 😅
The throttle should not have any spring tension to return on its own, when flying drones or planes for example. You can set this up with self-centering but you will have to constantly "fight" the spring tension instead of flying smoothly. If you are used to gaming consoles / gaming controllers, it will seem strange at first :)
Hey bro, does the radio come with a set of lighter tension springs or is it just a spare set of the normal tension?
I am not sure, I have not tried them. I will ask around and get back to you.
@@muteFPV thanks a lot bro! i feel like i am the only one on light springs coming from jumper
I mate, just a question, did u changed the stick friction on your tx16s because I just bought one and the stick tension feel so high
Thanks🙏🏻
Hello! I always adjust the spring tension and throttle friction when using a new radio. Adjust them to your liking, try them out when flying and adjust again, until you are satisfied :)
@@muteFPV Okay perfect👌😄I just saw ur video about it!! Thanks a lot for helping us
Thank you for watching it, I am happy you found it helpful! I am 100% sure you will enjoy the radio :)
Hello! I've this radio and would like to use an internal antenna, can you advice me a good pcb antenna with ipex connector?
Hello! You can find the one I used in this video's description, but expect less range if you do this mod: czcams.com/video/EwEaAl92tj0/video.html
So I have this radio and I am trying to adjust the gimbal tensions but the smallest hex screwdriver is too big for this. Any idea on the hex size?
I show the hex driver in the video, if I remember correctly it is 1.5mm size. Some of the screws fit very tight to my driver, maybe the same is happening to yours too.
My bad, I just realized that I had used the footage showing the hex driver in my other video: czcams.com/video/nVgwxvfr1f4/video.html
Where can I get your STL file for the gimbal protector?
Hello, sorry for the late response. You can find my 3D designs linked in the video description :)
How much do you have to turn the screw to get the rachet to engage?
Hello! Can't remember exact turns but not much
It appears that I had to crank it almost all the way down.@@muteFPV
opened up the TX 16s and the adjustable screws inside are phillips.....weird ...my radio I bought through Amazon 3 months ago and came with revision firmware 2.7....HEX HEADS will not work...hope this helps anyone with same exp. i opened my radiomaster up so I could clearly see the type of screw needed... hope this helps rick
I hate it when they change things up all of a sudden... I prefer hex but most radios I had used in the past usually had philips head screws for ratcheting and friction..
What size of driver is needed to adjust the gimbal tension?
You will need a 1.5mm hex driver. I had shown the driver in another video and thought I had shown it in this one as well but I did not :( I had included this information in the video description after another viewer pointed it out, sorry for the confusion.
@@muteFPV I looked through the description but failed to see the size there, sorry. Thank you for the quick reply, and the helpful video!
Thank you very much and sorry for the confusion :)
Hi so we cant adjust yaw and throttle stick throw ?
You can adjust the throw for throttle and pitch by adjusting the end stops. There are no endstops for the horizontal axis of the gimbals (yaw and roll).
@@muteFPV yeah that's what I was asking.. shame that think I need different TX that has shorter throws..
@serval_fpv I just found this out too . I want shorter throw for yaw and roll . Weird how you can adjust throttle and pitch but not the other 2 .
Hey, I want to purchase a new radio. I want it to be a compact, gaming style radio, with the ability to attach an ELRS module on back. What would you recommend? My current radio is the X9D+ ( which I despise) and I have an R9 module that works fine with ELRS flashed. I want to keep the module, but throw the radio in the trash.
Hello! I am not sure how many options you have for a gaming style radio that can fit a full size module on the back. Is selling the module and buying an ELRS-ready radio an option? Do you just need ELRS or also a 4-in-1 module?
@@muteFPV ELRS has everything I need. So you think I'm better off just buying an ELRS radio and just sell or forget about the module, right? The only problem is I haven't seen a compact radio with internal 915mhz ELRS....They're all 2.4ghz
Ah I see, ok, I will give it a thought. I am personally a large radio fan instead of the smaller gaming style ones so I am not familiar with most of them.
@@muteFPV Just went and asked the same question on the ELRS discord forum. It looks like my best bet is the Commando 8, which does have built-in 915mhz....So expensive though. Anyway, thanks for your help.
Radiomaster Zorro!
Hey, I have the same transmitter as you. When I try to adjustment the horizontal axis - nothing changed. Not on the right and not on the left side... Do you no the Problem? My Radio is brand new out of the box...
Sry for my English, I am from Germany
Hello! Are you sure you are adjusting the correct screw? You should feel a difference when making the spring tighter.
@@muteFPV Yes, I am sure. It is a little difference but mine is not so extrem loose then in your video…
Sorry for the late response, I missed your follow-up. I would open the rear of the radio to see how far the adjustment screw goes and confirm if the spring is fully loosened or if something else is going on. Can't think of something else if it does not go completely loose like in your case.
@@muteFPV No Problem, thanks for your help. Yes, I will open the radio tomorrow and check this. Merry Christmas 🎄🎁
Merry Christmas!
I have tried a 1.5mm and it won't seat.... thanks
How to make left gimbal self centring ❓
Hello! Please check at 0:05, it shows which screw is used to engage/disengage the self centering on the left gimbal.
Damn instantly ruined one of those screws with my new boxer.. These things seem like they have locktite installed on them.
Damn, which ones? At the front? I don't have the Boxer
@@muteFPV Yes at the front for my roll sensitivity. I found a screwdriver that still grips on it luckily but I don't dare to adjust it much anymore.
Mine dont seem to adjust at all on my radiomaster boxer, When in toke it apart the screws on the metal things are all the way out is that normal??