Now the Radiomaster Boxer is even better: AG01 Gimbals!
Vložit
- čas přidán 29. 06. 2024
- Uncertain about what to buy? Check out THE ULTIMATE FPV SHOPPING LIST: www.fpvknowitall.com/ultimate...
SUPPORT ME ON PATREON at: bit.ly/2Ep5Sia
THIS IS MY FULL TIME JOB. Here are other ways that you can support me: www.fpvknowitall.com/support-me/
---
I receive a commission (at no extra cost to you) if you make a purchase after clicking one of the affiliate links below.
Buy the RadioMaster Boxer at:
* RadioMaster - bit.ly/3YkWUZX
* GetFPV - bit.ly/3BDFwpy
* RaceDayQuads - bit.ly/3HGL4U0
Buy the AG01 gimbal for tX16S at:
* RadioMaster Store - bit.ly/3pqksNr
* Radiomaster - bit.ly/3WQwM7M
* GetFPV - bit.ly/3aUtf24
* NewBeeDrone - bit.ly/3WxMXai
* Rotor Riot - bit.ly/3WAXiCo
* Banggood - bit.ly/3vBnqAh
MANDATORY DISCLAIMER: I am a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for me to earn fees by linking to Amazon.com and affiliated sites.
---
My review of the RadioMaster Boxer - • I can't believe how go...
Is the AG01 gimbal worth $130? - • $130 for the gimbals a...
The right way to calibrate your gimbals - • You're calibrating you...
Which stick end is best for you? - • Which of these stick e...
---
00:00:00 - The AG01 gimbal is the jewel in Radiomaster's crown
00:00:59 - Remove your battery and open the radio
00:02:41 - Remove the old gimbals
00:03:45 - Exterior adjustment screws
00:05:36 - Why the throttle feels so good!
00:07:15 - Install the new gimbals
00:09:05 - Adjust spring tension and limits
00:11:58 - There! I ruined it!
I’m sure those who buy these will know damn well that these gimbals won’t make them a better pilot. Buying something because you like the look and feel is a great thing to do and ultimately that’s what it’s all about. The feeling pilots get when they fly becomes an obsession and love for a form of escapism. We’ll engineered equipment is a pleasure to interact with. ❤😊
well said cool cat
Well said. I was flying my Yak 55 35% with a Radiomaster with the ag01 gimbals. After about 1 month, I took my EF Edge 35% with JR 14ch DMSS for guidance.... Took off, made a few laps and landed. Airplane was feeling weird. And this was my best flying machine EVER. Couldn't find anything wrong in it. Took off again. Few minutes later I realized, the BIGGEST difference was not just the plane, but the radio. I can feel the feedback with the tx16 and AG01 and cannot feel it with the JR. Weird sensation. Hard to explain
I cant fly acro but I fully expect to be able to out fly JohnnyFPV with these gimbals.
Agreed. Especially when a lot of these gimbals use the same electronics in their plastic counterparts as well. V4 Radiomaster gimbals are plastic AG01s and the gimbals in the FrSky Tandem radios are the same plastic versions of the CNC ones in the higher end models. That said, I'm at the point in life where if I'm going to get something I'm going to get the good stuff and CNC does feel way better. TX16S has PL18s, X20 is an S model and the X18 I'm going to pick up will be the SE.
Unless you have used these gimbals, you are talking out of your arse. These things feel incredible and the precision, stickfeedback and solid feel DOES allow me fly better and makes the feeling experience so much more elevated.
Excellent work, Joshua! Thanks for the tutorial! 😃
Radiomaster is killing it!
Stay safe there with your family! 🖖😊
And happy new year!
The AG01 gimbals feel so nice in my TX16S. The Boxer radio will definitely feel less toy-like with those gimbals.
Mybe the ago1s will add some weight. good weight.
Fanfastic work, Jables. I ordered the boxer, and I plan on upgrading the gimbles, so thank you
We always learn stuff Joshua! thank you
If you order your radio and gimbals direct from Radiomaster at the same time they will fit them in the factory at no cost , I just purchased my Zorro with Gimbals and with a delay of about 20 days they arrived fitted no problem.
@Rocco $550 for a TX16S with a metal case that's gonna get hot as balls in the summer... I dunno man. You can get a lot more radio for a lot less money... It is cool looking.
Sweet! I look forward to receiving my preordered Boxer sometime in 2023. Maybe.
this looks like an awesome radio
Great sense of humor 😁
Awesome JB 🔥🔥
wow this was so easy, i was expecting soldering... thanks for this
Thanx for a great review, just recieved the Boxer max, this thing is awesome, for sure made me a better pilot in lift off compared to when i use my DJI remote, or my Jumper t-pro v2, i can way better feel the center position, also the resolution of these gimbals are better, had to raise my rates 😊👍
Come on Josh, who wants a RadioMaster Boxer with gimbals other than purple? Looks good in my TX16s.
Because the design of the radio has the intention for upgrades (they sell the upgraded parts) the warrantly technically shouldn't be void when you open up the shell like this. I had a dispute with a retailer of the Jumper T16 I bought a few years ago. I purchased the radio AND some of the upgrades from the same store, at the same time. A few months later when the switches stopped working (remember they used poor quality ribbons instead of jst plugs) I tried to get some replacement ribbons under warranty. The retailer said no, because I had opened up the radio... thereby voiding the warranty. I argued that the radio is intended to be opened up, and that by selling the upgrades they must also acknowledge that.
Ultimately, they insisted I send the radio back... I did so, fully tracked, and they'd had the package for weeks but still not contacted me. I got in touch and demanded a refund, they had my radio and my money. It took the threat of a paypal dispute before they refunded me.
Great Content
There was someone who made a 3d mock up. Of the boxer. But was calling it something between the tango and mambo. On fpv life i do believe. Some months ago. Cool that someone made something
This looks awesome! I hope you can do a video on pyrdrones new gimbals for the tango 2.. I would be super interested to then see you compare the radios.
Very cool 👍
The grease is probably high viscosity silicone grease, same stuff used in camera tripod fluid heads. I bought a small tub of it from a Manfrotto spares supplier. Would be good to know for sure since I have most of a tub left
For the screws not being symetrical you could put a sticler that matches the color and have a printed on fake screw hole...just saying.
Just checked the Radiomaster page, the included extra springs are : 2 * TX16S Softer Tension Spring Set
Best Radio 2023! 😍😍😍
I just order the pyrodrone gimbles for my tango 2 and the elrs modular. But this boxer radio with the ago1 looks so tempting for a second radio.
Unlike the tx16s, installing the led ring won't compromise your stick travel. So that's something you can do.
Oooooohhhhhh premium feel
just a tip for people out there. put heat shrink on the throttle gimbal tensioner. it gives a more consistent smooth grip if you like it grippy.
it will feel scratchy at first but it will smooth out with silicon grease.
I have a roll of adhesive 3M Teflon tape that I put on all of my throttle bars. That, combined with the RadioMaster damping grease makes for an unbelievably smooth throttle that still doesn't move on its own. It's my preference personally, but using heat shrink is an interesting idea for having a grippier throttle. I'll have to keep that idea in my back pocket if I ever want to try that.
AG01 grease works great for these, the PL18s and the CNC gimbals in the FrSky radios. Gives you a little more... I dunno it feels like you don't glide right through the center which is the only complaint I could maybe think of with CNC gimbals.
Can we have some commentary on the processor it's using compared to tx16s and if it's worth waiting for colour display one or this is good enough
"They add a premium feel"... Well, they better, they cost as much as the whole radio 🤣
@Joshua Bardwell Radiomaster must have listened to your video! The screws holding my Boxer together are Hex head!
your bald head is very cool
@@abertheham keep that to yourself even though most people agree 😂
Wish I had the knowledge that's inside his bald head!
@@heliharris69 😂true
I wonder if mine is too?
Radio master Zorro with AG01 gimbals is still 👑. Less is always more in FPV
Not really. The Zorro has some poor design decisions that steered me away from it like the sliders being on a very bad position, poor battery life and the ugly ass display sticking out. The TX12 is a better choice than the Zorro.
Definitely gonna order one once the special editions drop with the ag01s already incl😢
Apparently they'll install the gimbals if you order direct from radiomaster.
That looks like the heavy weight silicone "oil" I use for large RC truck diffs.
Brill. Sense of humor, is a major plus. Its helps the Learning Something! 🚜
@@beachhobbies Ummm well, its 'short' for something....i will let u figure it out
I will be holding out for a boxer pro (if they make one)
I'm tempted to get the boxer radio for my 8yr old son 🤔
There's a $3000 rims on a $800 Honda joke in here somewhere...
For a really excellent lube made from pure lanolin, try Lano-Lube..Use it in the aerospace machine shop I work at. Would anyone out there know of the bind protocol for the TOP RC P51D 450mm Mustang? Great channel, thanks.
Im buying your JB edition tx16 with the built-in express LRS. Wondering what drone to buy next. Prolly gonna get the defender 25 with the dji 03 in it. Next friday. Cant come fast enough!!!
This guy gets it
I wish it had the screen from the tx16. Only thing stopping me from switching
I wish I could audition the AG01 gimbals. Been pretty happy for some years with a QX7 with hall gimbals and lately, an ELRS module in the JR bay. I also don't think push buttons at the corners of the Boxer works for my needs.
You have NO IDEA how good these gimbals feel. It is WORLDS better than plastic gimbals. Like, it will blow you away how smooth, crisp and precise they are. No contest hands down.
Waiting for the Boxer Max XD
Can we use various other stick ends at full deflection to the corners without hitting the faceplate like on the TX16S?
Funny is when you been flying for over 40yrs a gimbal is just a gimbal
I use to fly Kraft radios and old futabas and never in my life time ever wore out a gimbal . It's not going to make you a better pilot.
I think it's a waste of money
But people out there think it's better and buy it cause it's makes them a better flyer.
Correct, never had to change my Futaba gimballs... 😂 Radiomaster and frsky are toys... But hey, it works and doesn't cost you an arm or leg 😬
People just buying it for the looks man. And CZcams sales man trying to cash in.
I have both the Zorro and the TX16S with AG01 gimbals (mini for the Zorro). However, the TX16s gimbals always seemed "too big" for me when flying rc planes and drones. And the Zorro is just slightly too small. The DJI FPV Controller 1 was PERFECTTTTT. But I don't think they will ever come out with a AG01 Medium Gimbal and new controller for that will they? LOL
0:50 lol dude, you are such a cool guy, FUCK YES WE GONNA LEARN SOMETHING TODAY
You don't want the LED's in this radio like you have on your TX16S?
Does the gimbal led work for the this radio with ag01s or do the sticks rub the radios body
Hello. Could you please review the darwinfpv mini goggles? i would like to buy the baby ape pro v2 elrs rtf kit but I am not sure if the goggles are worth the money.
Bye
That throttle gimbal lubricant wears off really fast. Have to look for another option 🤔
Week or two and throttle feels really rough
yeah same
I purchased from AliExpress 'dampening oil for camera' last summer, for 3 euro's per 50 gram container also from another store for 6 euro's, check for delivery cost. It's the same stuff.
no LED's this time?? what were you thinking Joshua!! 😜
what about applying the two types of lub that came with ago1
I fly gas airplanes with 16tx 4in1 ...does the boxer 4in1 have the same range to fly my 40 cc gas airplanes ? Would it safe regarding range?
Does the LED light upgrade limit the gimbals like on the tx 16?
I love the ag01 gimbals feel but i’m having to replace the springs every couple months. I think the extra weight wears them out faster
Maybe do the PL18s on your next Radiomaster? Have had them since Edge released and never any issues like that. Honestly have not heard of spring issues on the AG01s either tho.
@@scottyd035ntknow What are the Pl18's?
I did a Google but I'm not finding much. The original gimbals?
I ran the default gimbals on my tx16s for a year or so before I upgraded to AG01
Extra weight, lmfao wut? The same force required by the spring to return to center is the same whether plastic or metal.
can't believe they added a "warranty void" sticker
When will the boxer start shipping. I ordered both the radio and gimbals, and it seems like the AG01s will arrive 1 month before these radios even ship.
wow this looks lik an interesting transmittr ...radiomaster gone and done it now lol
I could use more people into fpv where I'm from east Oregon. with firmware.. or how to use the computer maybe 🙄. This channel is the best learning experience though
I've only been a few times, usually on my way to the coast
boxer gimbal mark mt1.0 rathan than mag 2.3, what is difference
Will the radiomaster will fly the DJI stuff?
Really wish they would make then without those odd patterns.
Whats the point of purchasing the boxer in any version other than the 4-1?
Arent the other options included in the 4 in 1 ?
Hi Josh, please use your influence to get RM to put the momentary shoulder switch on the left rather than the right.....the entire (RH) DLG community needs it on the left, but somehow theyre stuck on the right convention...........the Boxer is a winner for DLG - except it isn't.....
has annyone tried flying with ome of these new ar glacces like nreal air ,?
@joshua bardwell How did you setup blue power button led? Mine is green when turned on
That's not configurable as far as I know. Mine is blue when the radio is on and green when the radio is charging.
I just had my first Boxer in my hands. Yes,it fits my hands nice but it is too lacking. Two position switches vrs 3, BW vrs Color, no touch screen, no widgets,not enough switches. I prefer the TX16S. TX16S is much better full featured radio.
Will the led light rings fit in this radio? It looked like there was plugs on the board for them.
Yes I believe so. I saw another video where they were installed.
HI Joshua, would you pls confirm the radiomaster boxer gimbals (either stock ones or ag01) the sticks have the same resolution as the tbs tango/mambo? I've purchased the Boxer hoping i'd get the "real full size" gimbals in terms of having the same resolution such like the taranis x9d but it looks like it's similar to the tango2/mambo....is that right?
The ag01 gimbals are large similar to x9d, not the smaller gimbals in Tango 2.
@@JoshuaBardwell Thanks Joshua for the reply. I assume the stock ones have similar throw/resolution as the ag01....i suppose.
MMMM, ratcheting, my weird a** over here loving the ratchet on my quads, lol
I love the ratchet on the throttle; am I broken?
Obviously! 😆
RadioMaster Boxer Bardwell Edition lol
Without touching the screws of the gimbals, is the default setting for them alright? Or do they need fine tuning?
I think it's all right but it's a personal decision.
@@JoshuaBardwell Alright, I ordered the radio with gimbals. Hope yout link worked! :)
Do u pinch or hybrid pinch? If so which switch do u use for a quick disarm? I had a mambo for a week and couldn’t adjust to the switch positions for quickly disarming. I’m so used to the top left switch on the qx7 and now the tango 2 toggle switch and am worried the boxer won’t work for me
I use the front face switch because I don't like using the shoulder flat switches for arming.
@@JoshuaBardwell do u use the school of thought of flicking your finger up to disarm quickly or do u keep another finger like the middle finger resting against the switch to flick it down to disarm . Thanks for the info
I push away to arm and pull down to disarm.
no led light around the sticks possible?
It is possible.
89$- 100$ ouch 🤕
Going to get a radio, advice on which one to go with zorro or x12?
why not Boxer?
I have the x12 for couple of months and I'm happy, but I think I would buy this one if I had the option back then.
Zorro
TX16s is just a way cooler radio sorry. I like a huge color touch screen.
What drone is recommended for long range under 150$
Under $150, forget it. It's just not possible in my opinion. The closest I think you can get is something like this: flywoo.net/products/explorer-lr-4-v2-analog?_pos=3&_sid=568718610&_ss=r
Does Boxer use the same AG01 gimbals as TX16s?
Yes it does.
Are the Tx16s AG01's able to fit the Boxer?
Yes.
@@JoshuaBardwell Awesome, i thought so but wanted to double check, 👍
Yeah, I agree. These won't make you a better pilot. you're just installing your own proud signature of ownership. nice though!!☝
I can mount this gimbals on my taranis qx7??
M7's are good enough!
is it possible to just switch the gimballs to change the mode on this radio ?
You don't need to do that. Both gimbals can be set to centering or non-centering throttle by turning adjustment screws.
@@JoshuaBardwell so i change the mode inside the radio menu, and turn the adjustment screws and it wil be fine?
Yes.
What do you think about the Lumineer TX16s $550 radio?
I discuss it in this video. czcams.com/video/6bFq3t6g0YI/video.html
Doubling the price of the radio . . . hmmm
Yeah, I think if you want ag01s, get a tx16s
I feel like it's a little bit silly to buy a budget radio and then add gimbals that cost as much as the whole radio.
The boxer is marketed for people who want bang for buck. Doesn't seem like that crowd would be interested in buying insanely expensive upgrades that don't effect performance to any significant degree. I guess the urge to upgrade is strong in this hobby though so who knows.
I just got the red Boxer Max which has the AGO1s as standard with all the switchwork converted to aluminum. It's pretty reasonably priced at $259 and I get the premium feel and compact form factor I want. It's a great radio and still great "bang for buck" just at a different price point. The AG01 gimbals are really nice, better than the Futaba and Spektrum radios I've owned in the past where you don't get CNC gimbals unless you're willing to spend at least $7-800.
That is just too much money for gambles they cost as much as the radio
Why nobody is talking about shoulder buttons? Horrible decision on a great radio =(
I love shoulder buttons. I missed them when I got rid of my Tango 2 and looking forward to having them again when I get the Boxer.
first
Biased opinion ?
Raodiomaster really needs some new blood in their design departepment...their designs suck ...its awfull on any objective contemporary scale.
I really wish that radiomaster would've made the screen color 😫 it doesn't have to be touch screen but just having a color display would've put the cherry on top on this radio 🤌🏽
That would require a lot of new work for edgetx team to support a new screen size.
@Joshua Bardwell I know 😫....lol I just really love the size of the midsized radios JB like the t12 is my favorite! But I have the crappy cc2500 I was gonna throw on an elrs module but then the newer tx12 came out and I was peed off lol now this bad boy is out and I love it! The full gimbals are awesome I fly planes too so I'm in the market for a do it all radio I think this one in a 4in1 version with a ranger plugged in the back might be GOLDEN😁👍🏽✌🏽