PRIMING 240SX WITH HARBOR FREIGHT AVANTI HVLP ELECTRIC SPRAY GUN

Sdílet
Vložit
  • čas přidán 11. 02. 2021
  • Shooting 2k primer on my buddy's S13 with Silvia front. Less ugly, still ugly.
    AVANTI HVLP
    www.harborfreight.com/air-too...
    TRANSTAR 6564
    www.amazon.com/TRANSTAR-2K-Ur...
    Track used:
    Oyasumi by Smith The Mister smiththemister.bandcamp.com
    Smith The Mister bit.ly/Smith-The-Mister-YT
    Free Download / Stream: bit.ly/oyasumi-smith-the-mister
    Music promoted by Audio Library • Oyasumi - Smith The Mi...
  • Auta a dopravní prostředky

Komentáře • 58

  • @user-gg4of8kj6y
    @user-gg4of8kj6y Před 3 měsíci +2

    You can turn the pick up tube to draw from the lowest point in the paint cup. To eliminate spitting

  • @Pendragon501
    @Pendragon501 Před 2 lety +2

    I don't know about this new electric spray gun they have, but the old one had this giant filter built on to the end of the pickup tube inside the paint reservoir. so every time it got down to only about an inch left in the paint reservoir it would start sucking air. If this one's the same way, you just have to replace the pickup tube with just a solid tube that goes down to the bottom of the paint reservoir and it no longer has a problem.

  • @CORLEONESPORTS97
    @CORLEONESPORTS97 Před 19 dny

    i painted my whole car with that gun, it was so easy, like glass, screw compressors, i got same result without lugging around my big compressor

  • @L8terdays
    @L8terdays Před 2 lety +3

    Spin the pickup tube around to the front of the can.

  • @The1Karking
    @The1Karking Před 2 lety +2

    OUTSTANDING with all that dirt! 🤨🤨🤨🤨🤨😖😖😖😖😖😖

  • @gatordogcustoms3706
    @gatordogcustoms3706 Před 2 lety +3

    do you think it could handle spraying 2k clear?

  • @user-iq3ne7kv5b
    @user-iq3ne7kv5b Před 6 měsíci +1

    But it's a primer....I don't give a shit... 🤣🤣🤣🤣🤣 this was golden thanks for the laughter. Hope it turned out well. Looks real nice

  • @loadedfun4764
    @loadedfun4764 Před 6 měsíci

    Turn the snorkel inside the spray bottle to the front when spraying hoods and trunks.

  • @thewordpress7092
    @thewordpress7092 Před 2 lety +9

    POSSIBLE FIX: attach a weight to the tubing inside the cup without obstructing the flow. As you tilt the cup on horizontal surface the tube should tilt also and remain submerged into the paint. It should continue to feed smoothly.

  • @mariuslouw78
    @mariuslouw78 Před rokem

    I’ve got a similar electric sprayer and planning on painting matte military style paint with it. Being matte the low pressure should be fine. I’m crazy enough to try it on my cheap car.

  • @tailopez5106
    @tailopez5106 Před 3 lety +1

    Them Toyota’s tho 👌

  • @thestreets.aka.joshua
    @thestreets.aka.joshua Před 2 lety

    Just put more paint in it?

  • @DragCadRacing
    @DragCadRacing Před 3 lety +4

    I think the pickup can be relocated for whether your paint angle is up or down.

    • @StyleHouseRhythm
      @StyleHouseRhythm  Před 3 lety

      It does rotate! I'm used to spraying with PPS 2.0 cups, so I've never had a material feeding issue. The next project I'm using this on will involve an experiment to see if it can be a cheap solution.

    • @consigliereofyoutube5565
      @consigliereofyoutube5565 Před rokem

      @@StyleHouseRhythm bet the neighbors love all the overspray on their cars. inconsiderate ass... i wouldnt expect anything more from a.... well you no

  • @cslloyd1
    @cslloyd1 Před 2 lety +1

    Best HarborFreight sprayer is the 64oz pressure feed hvlp.

    • @3gcraftsman
      @3gcraftsman Před 2 lety

      What’s the minimum compressor size you can use with that gun?

    • @cslloyd1
      @cslloyd1 Před 2 lety +3

      @@3gcraftsman i dont know what the official requirements are but i use a 10 gallon, 4.3 scfm Fortress compressor with a 10-gallon side tank and i rarely need to stop and wait for it to catch up. Thicker paint needs more air, so if you thin a little, you can spray longer. You can spray very viscous paint with this unit which is why it’s awesome

  • @zanaga1901
    @zanaga1901 Před 2 lety +1

    Is it a great spray gun for base, clear and primer on vehicles and will make a professional look too with no orange peel.

  • @Yota4Life
    @Yota4Life Před 2 lety +1

    No dilution? And what hardener?

    • @StyleHouseRhythm
      @StyleHouseRhythm  Před 2 lety +2

      6584 activator. It was a 4:1 ratio for primer, so no reducer necessary.

    • @Yota4Life
      @Yota4Life Před 2 lety

      @@StyleHouseRhythm niice thanks!

    • @shanedylewski5488
      @shanedylewski5488 Před 2 lety

      We used this in the house,we sprayed the ceilings,the cabinets and the walls,...if you play with the settings on the trigger,and fiddle with the attachments and you reduce the material,it will spray very well,keep it pretty full and it won’t spit.....I definitely recommend thinning the material some

  • @pierrestebenne1692
    @pierrestebenne1692 Před rokem

    Je demande veux commander savoir 240 sx avanti

  • @ozzyhernandez8896
    @ozzyhernandez8896 Před 3 lety

    Did you apply the paint with this spray gun too?

    • @StyleHouseRhythm
      @StyleHouseRhythm  Před 3 lety +1

      I did not. Currently editing video for paint. Stay tuned.

    • @jkgkjgkijk
      @jkgkjgkijk Před 3 lety +1

      @@StyleHouseRhythm yo, bro....use a roller and rust-oleum for that.🔥 Quarts are in sale at da walmart right now. ☮️

  • @tamhamill5274
    @tamhamill5274 Před 3 lety

    Did you use this gun again to paint the car

    • @StyleHouseRhythm
      @StyleHouseRhythm  Před 2 lety +1

      No I haven't. I'm currently working on other projects atm.

  • @georgemarijanovich
    @georgemarijanovich Před 11 měsíci

    Should have lifted a hood bro, to get it more vertical rather then tilting a spray gun.

  • @SupaMan2122
    @SupaMan2122 Před 9 měsíci +2

    Can you use color paint not just primer?

  • @SubtractZero
    @SubtractZero Před 2 lety +1

    Other viewers: "this is my experience with that spray gun..."
    Me: Look at all those enemy bushes and trees, they're just waiting to f*ck up an otherwise decent paint job.

  • @Rome7869
    @Rome7869 Před 3 lety +1

    😅 I got one today..... now I'm watching reviews 🤦🏾‍♂️

    • @traderryan713
      @traderryan713 Před 3 lety +1

      Bout to paint my car tomas with it. lol. Now im worried how its gonna act spraying the roof.

    • @StyleHouseRhythm
      @StyleHouseRhythm  Před 3 lety

      I’m planning on using it again with a quick modification on a hood to see how it does.

  • @mileswatkins2162
    @mileswatkins2162 Před 3 lety

    How did you paint it

  • @londanner5251
    @londanner5251 Před 3 lety

    can I paint a barn?

    • @StyleHouseRhythm
      @StyleHouseRhythm  Před 3 lety +1

      I've never shot a barn before, but this is probably more suitable for barns and walls than it is for automotive!

  • @jbrown4993
    @jbrown4993 Před 3 lety +4

    Bro why u wearing a paint suit outside...thats a lil too much

    • @StyleHouseRhythm
      @StyleHouseRhythm  Před 3 lety +7

      I'm poor and clothes are expensive. I also shoot full time, so I prefer the least amount of exposure to VOCs as possible.

  • @nattsojaqs9822
    @nattsojaqs9822 Před 3 lety +2

    How come you using a mask outside?

    • @mikemikeyee
      @mikemikeyee Před 3 lety +3

      Can’t be sure where you can catch the covid 👀👀👀

    • @nattsojaqs9822
      @nattsojaqs9822 Před 3 lety

      @@mikemikeyee real shit. Stay safe homie

    • @StyleHouseRhythm
      @StyleHouseRhythm  Před 3 lety +1

      Mike is right. Also even if it’s outside I still don’t want to inhale it. I didn’t have my respirator on hand at the time.

    • @Mutatedchromosomes333
      @Mutatedchromosomes333 Před 3 lety +1

      So you don’t catch cancer inhaling paint particles it will kill you.

    • @nattsojaqs9822
      @nattsojaqs9822 Před 3 lety +1

      @@Mutatedchromosomes333 Are you fried?
      So, it's okay for it to rise up into the breathing air and disperse, potentially causing the same effects on others in the vicinity?

  • @MOLILO1967
    @MOLILO1967 Před 2 lety +1

    Well first you need a hvlp gun with a compresor
    No need a suit not going to the moon
    Definitely not recomended for clear
    BETTER BY A PRIMER CAN AT THE AUTOCOLOR >

    • @chris01479
      @chris01479 Před rokem

      Have you done this to respray on your car using with HVLP electric spray gun? I'd love to know!

  • @vandamnjaunclode9813
    @vandamnjaunclode9813 Před 10 měsíci

    its sucks machine

  • @RobXb
    @RobXb Před 3 lety

    Harbor freights not really a good brand. Just buy a good machine so you’ll have it forever.