Video

I would spray the hood first.

i painted my whole car with that gun, it was so easy, like glass, screw compressors, i got same result without lugging around my big compressor

Where did you buy the paint from

You can turn the pick up tube to draw from the lowest point in the paint cup. To eliminate spitting

I’m not a painter but I’m going to try to paint my motorcycle myself so I didn’t want to spend hundreds of dollars just to use it once or twice so I bought that R500 gun that wasn’t too expensive but had good reviews, now after watching your video I bought the harbor freight cups, thanks for the video

Sata 2000 is the one I’ve used for everything. I got mines used with a 1.2mm tip sprays awesome with slick finishes.

haha did a boat in key west w. my Fuji years ago and a month later customer asked " do you have chickens?". i went to look and a small part of the rear deck... yep. chicken ran across it when wet. was really hard to see. he opted to leave it, as it actually looked cool :)

But it's a primer....I don't give a shit... 🤣🤣🤣🤣🤣 this was golden thanks for the laughter. Hope it turned out well. Looks real nice

Turn the snorkel inside the spray bottle to the front when spraying hoods and trunks.

Can you use color paint not just primer?

what do u call the drill thing u put in ur drill?

its sucks machine

What happens if it drips

Should have lifted a hood bro, to get it more vertical rather then tilting a spray gun.

Good job

Tbh this is incredibly helpful! Thanks for the tips!

Check out Aeropro R500 gun. LVLP gun that has amazing reviews everywhere and it's cheap enough. Comes with 1.3, 1.5, 1.7 and 2.0 tips if you know where to search.

Those houses look like ones in Fremont, CA...

Dude everything from your camera shots to your paint job is garbage! Then you had the nerve to make a bullcrap paint booth on a driveway??? Why don’t you get a real 9 to 5 at a fast food joint or something? YOU’VE COMPLETELY WASTED MY TIME!!!!

How do us diy'ers dispose of paint waste responsibly? My local waste companies all just instruct you to dry the paint before tossing it in regular trash. As for solvents, who throws that stuff in the trash? I can always find a use for any type of solvent. Mainly, cleaning paint guns and equipment, I use the hobo freight cup system and it works great. I also have a smaller cup system. I can't remember what brand, but I've had a couple different ones. They use the same cup adapters. The little ones come in really handy for small jobs.

Definitely need better camera equipment!

Well I'll be dropped in doodoo and rolled in cookie crumbs that worked good!

how'd it turn out? saving thousands doing it this way. my plan

🔥 🔥 🔥

Je demande veux commander savoir 240 sx avanti

I’ve got a similar electric sprayer and planning on painting matte military style paint with it. Being matte the low pressure should be fine. I’m crazy enough to try it on my cheap car.

Hi, did you use regular spray nozzle that came with Fuji?

I think looks like the paint it’s bad because it’s go down I can see that last part I think of the !! Fuji Spray 2203G Semi-PRO 2-Gravity HVLP Spray System , Blue

I’d like more Fuji paint job videos. I thinking about trying it myself

I’m using this system but I still can’t read the paint measurements in the spectrum cup. Everyone I see using this system is using a separate mixing cup then pouring it into the spectrum cup. What the point of this if your still cleaning out a mixing cup. Can anyone tell me how to read this paint cup measurements. I know how to read a standard mixing cup however I can’t read this cup. I also see comments saying this is junk I have used it for months now and never had a leak. If your having issues you must be doing something wrong. I have had NO PROBLEMS put her than the paint measurements on the cup and this is just My inexperience.

Do you spray base coats with the sata 2000?

These are complete junk. I am so lucky I tested these with acetone before putting paint in the night before. Now I’m just hoping they will take them back. I bought two kits and the refills in anticipation of them working but lost the receipt on one of them. I like H/F but these are absolutely trash and will spoil someone’s paint job.

Just put more paint in it?

Best HarborFreight sprayer is the 64oz pressure feed hvlp.

🥰 lol that was a sexy removal

do you think it could handle spraying 2k clear?

Well first you need a hvlp gun with a compresor No need a suit not going to the moon Definitely not recomended for clear BETTER BY A PRIMER CAN AT THE AUTOCOLOR <<<<<EASY >>>>>>

POSSIBLE FIX: attach a weight to the tubing inside the cup without obstructing the flow. As you tilt the cup on horizontal surface the tube should tilt also and remain submerged into the paint. It should continue to feed smoothly.

Lol, this is definitely the most erotic BMW tail light removal video on YT

Looks like you have a descent paint room.

Been autobody and painting for over 45years ' I'd like to have been the fly on the wall watching I mean the fly that landed on the hood 😂 Anyways enjoyed your video.

If I can make a comment Go on marketplace. You can find used units on there sometimes new units for half the price or less. All you have to do is pay for shipping and clean the unit. Most of the time the hoes will be covered in paint and the spray gun will have some paint left on the outside or it might have some paint inside. All you have to do is clean the gun or hose with acetone or lacquer thinner or he can use paint stripper on it. If you use paint stripper make sure to test a spot on the handle to make sure you do not melt the plastic of the handle. Wash the gun off completely with soap and water after using paint stripper on it then you can wipe it down again with acetone spray acetone through the gun to make sure everything is out. I purchased a $2,000 spray unit for $100 and I happen to be in town in that state and was able to pick it up so I had to pay for no shipping so there are some great deals out there happy hunting and go spray some s***

Don't feel bad at least you didn't have a cat walk across the top of it

That's wrong painting on drive way. Atleast inside the garage. Respect your neighbors. Even though they don't mind .....

Other viewers: "this is my experience with that spray gun..." Me: Look at all those enemy bushes and trees, they're just waiting to f*ck up an otherwise decent paint job.

i have a semi pro 2 and have painted a few small things with it... never heard of using comet on a vehicle.. you should really be using final wash and a good microfibre towel. also that squeegee probably just made some scratches which will turn into swirl marks in the clear..

Spin the pickup tube around to the front of the can.

No dilution? And what hardener?

Is it a great spray gun for base, clear and primer on vehicles and will make a professional look too with no orange peel.

Yes you can buy a vaccum motor and make a turbine. There is a great video on here about building one. Open the fuji up, there is a two stage vacuumm motor and a on off switch, inlet and outlet. Simple. Makes use your motor is "internal bypass"