Broken Front Wheel Spindle Failure || The Mechanic Had No Other Option But to Repaired It....
Vložit
- čas přidán 17. 10. 2023
- Broken Front Wheel Spindle Failure || The Mechanic Had No Other Option But to Repaired It....
#brokenfrontwheelspindlefailure
#mechanichadnooptionbutrepairit
#pkprocess - Auta a dopravní prostředky
There's just no excuse for repairing this, that is putting everyone's life at risk repairing a structural failure like that, I understand sometimes you have to fix and make do but not with things like this!
Sometimes there is no choice, he doesn't look like he's from a consumer country.
exactly !
They do their best with what they have.
spoken like someone who has always had another choice. Life isnt worth as much in some places
I hink this part is from 1976 and there is no new to buy!
To weld this big metal piece you have to preheat it at least to 500 to 800 Celsius degrees.With this cold weld method the joint should be unstable and three different metals comes out. The big piece the smaller and the melted electrode.Sometimes is better to don’t do anything than do it wrong…the risk of accident is very big…
At least he's wearing SHOES !
Good job!
Hopefully after it's installed, it will run for some miles without killing the driver and other people when it breaks again.
The part failed half a kilometer down the road! lucky it broke down at the next repair shop. Its uncertain if any one was injured this time around
@@MrNeverseeme
Lucky owner.
If it wasn't a rainy or foggy day, backlight-warrenty should have been still valid.
It was all going so well until the bubble gum welding machine came out , No penetration , its made from cast steel , its broken ,put it in the bin , it wont last long , especially with the precision angle grinding 😂😂😂
Чугун так не варится.Не надолго это🤣
Лучше не придумаешь если надо как то сокращать население в регионе
It's good hear that Woody Woodpecker is helping out.
It truly pisses me off watching these videos. EVERYTHING is done wrong. People who are saying that this is an amazing work, have absolutely no idea what the hell they are talking about. It is a good entertainment video. This is not a repair. This will not work and will fail in no time. The only thing that those mechanics know is how to use a stick welder. That is all. They just weld everything without any preparations. And this specific part cannot be repaired. It HAS TO BE REPLACED!
I disagree. These repairs are very good and valuable, because in these underdeveloped countries there are NO old spare parts, because the factories discontinue them and, furthermore, the materials they use are sometimes better than those of the manufacturers. Your work is very good, it helps many people who work with heavy load transportation. God continue to bless you.
I think Crazy glue from 7-11 is stronger than that weld,,,,ha3
좋은 영상 감사합니다👍
😂😂
Guys, imagine they are halfway up the Kyber Pass in a tiny village. That little shop does that stuff ever day. Ok. The prep was fine, got fresh metal to weld to. Would have been nice to take the bearings out and preheat the parts. The fussy 7018 was the right rod on the clean steel. Would have been nice also to make more of a V to ensure full penetration. Welding was fine, the slag fell off. They only ground off weld where they needed a flat surface. Did not cool it rapidly so not brittle. It will last for a year or two, just don’t speed around anymore. Zero salt on those roads to wreck things. Pity about the truck weigh scale bit missing completely. Away we go!
And, there's are pretty huge pothole somewhere that still needs to be filled too!
That is scrap,
Fun fact - no one ever comes back to complain about the repair!
При сварке нужно снимать фаски с двух сторон до середины.
Что бы был сплошной провар.🤔
А остатки смазки отрицательно сказываются на качество сварочного шва.
Будет много пор‼️
Mohammed- " Can you fix my spindle- I need to get this load of nitro glycerin over the 16000 foot Himalaya pass?"
Achmed- " Hold my beer"
Przepiękne jest to odrestaurowane i pospawane pozdrawiam mile i serdecznie 👍👍👍👍👍
Хоть бы косынок усиливающих наварил! Сломается же рядом со швом.
Дак оно итак отломится,это ж чугун😆
Looks great,but has the structural integrity of a wet biscuit.
that spindle back is too thin.
I machined spindles for UK Seddon-Atkinson trucks back in 1976 that were much more solid.
Man kann ja vieles machen in der Not, aber hier hört der Spaß wirklich auf. Das ist ein geschmiedetes Teil, wenn das schon bricht, dann wird das geschweißt sicher nicht halten. Keinen Meter würde ich so fahren.
I find it amazing that a shop in Pakistan doesn't have a vice to put parts in while working on it.
and they still get it done.
It's on order init
Very nice lathe
Показали бы сразу тест драйв эта деталь и метр не проедет это же чугун .
How they manage to break that to begin with amazed me.
Мартышкин труд. Лопнет сразу 😅
So many bad and wrong and UNSAFE things here ! Apparently they have no liability in the third world
Sí tendrá la resistencia que tenía esa pieza antes de romperse?...de todos modos esos mecánicos son muy recursivos pero trabajan en condiciones no muy buenas....
Estos sujetos ganan más con CZcams que con esos trabajos tan mal hechos. Está claro que lo hacen por las ganancias que obtienen en las redes sociales que por otra cosa porque trabajos que no sirven de nada
1st Your video is Amazing❤❤I will always support you when you release a new video❤
Thank you so much 😊
Where was this filmed?
Pakistan@@davidsitton878
Here is PK's fanboy. lol
@@davidsitton878 Some comedy circus employing clowns as mechanics.
حداد ولباسه ابيض ههههههه
Чугун варят в горячем состоянии,и вообще даже лох не поставил бы эту халтуру на машину,ты показал как нельзяделать или не понял?
to nie jest żeliwo
Это естественный отбор один чинит, другой разбивается, другой хоронит, и каждый делает своё дело и имеет место в этой системе жизни.
Perfection
👏👏👏👍
Yeah, that'll hold!
Great fix do what u gotta do to survive period period
Dumbest comment on the internet! Congratulations, Goober!!
You got to be kidding me. I hope you don't work on any critical safety equipment.
@@Biffo1262 I work on whatever I want to
Repair job, 10,000 Rupees. New replacement part 2,500 Rupees.
RIP truck driver.
Lethal repair.
"Had no other option" so, Emergency repair!😮
Da fehlt noch grüne Farbe ... und der richtige Spruch drauf!
one way to keep the population down
Absolute nonsense. These parts must not be repaired by welding, they must be replaced with new ones. It's driving a vehicle. You can weld anything, but you can end up in a graveyard. They make idiots out of people.
У людей нет вариантов.
Где взять новую?
А нигде их просто нет 🤔
exactly !
@@TKSERG Ever heard of casting and machining.
@@TKSERGSo you scrap the vehicle or find an alternative. You cannot justify crap repairs that kill people no matter what the need.
They have skills, I am respects these people.
Ослабил метал нагревом , долго не проживет твой ремонт
ты думаешь они ослы но они думают ,что ты осел и тебе подобные,обьясню ,если в дороге это шопера подведет он ему под ребро пику вставит и они это знают ,там закон один ,накосячил получай под ребро .я путишествовал по Индии и Пакистану там все жестко. так .что поздравляю ты осел ,ну так выходит .
It's a cosmetic fix , it is nowhere near as strong as original steel . It will fail under stress, the molecular composition of the steel is laced with stress fractures .
Showcasing Remarkable Mechanical Skills
When is this happening ?
ЭТО СТАЛЬНАЯ НО И АНА НА ПЕРВОЙ ЯМЕ СЛОМАЕТСЯ ПРИ СВРКЕ МЕТАЛ ОСЛАБДЯЕТСЯ ОНИ ДУМАЮТ ЧТО СУПЕР УМЕЛЬЦЫ САМ ЕЕ В МЕТАЛОЛЛОМ ВЫКИНЕТ
Overload the vehicle and this is what happens 😮
I would attach a pc of plate there to make it stronger, graining down just make it weaker, no good
The mechanic did have another option, he could have tried to explain to us how the spindle failed in such a way in the first place.
This is too risky on the road. It's doesn't worth one s life. 😮
over there, one's life has no value.
Yo vi mal o con un disco de desbaste estaba cortando eso? 🙄
При отсутствии служанки ипут конюха .
Death trap !!!!
These guys are so skilled, it's simply awesome how they are able to return a piece back to its original condition.
Please go back to playing with Lego.
@@Biffo1262 another American whose soul is crushed bc he was conditioned to believe only Americans are capable of doing exemplary work. Go back to sleep, snowflake.
You are joking right? return a piece back to its original condition? I have been laughing since I saw your post 😄
@@benk7081 Another hater who can't cope. 😂👍
This is a joke
Cele zle taketo namahane dieli sa nezvaraju este k tomu predna naprava pri prvej jame dojde k havarii cele dat do srotu a objednat oryginalny diel🚘🚚🚛🚔🚓👎👎👎👎👎👎
Ходить это не будет потому что варил прямым электродом
😁👎👎👎
strong so much ???