The Oddly Broken Axle Was Well Repaired by The Mechanic and Perform Amazing Skill
Vložit
- čas přidán 14. 08. 2023
- The oddly broken axle was well repaired by the mechanic and perform amazing skill
#oddlybrokenAxlerepaired
#Mechanicrepairperform
#pkdiscoveringtechnology - Auta a dopravní prostředky
Можно было просто хамутами стянуть сварка явно здесь лишняя😅
Странно что не покрашено ещё, так-то слой эмали тоже придаёт упругость
Либо синий изолента вместе хомута 😅
Тогда в два прохода с перекрытием 80%
На термоклей посадить знатный лафак
я ваще не понял из чего сделан этот вал- из дерева чтоли?))) судя по излому. метал так не ломается)))) если это дерево и саморезов хватило бы
а если серьезно, то как сварщик я скажу что данный вал это нагруженный элемент и сваркой тут не помочь, надо восстанавливать геометрию и тд. Лучше купить новый
I suspect that axle now has physical properties roughly comparable to a broom handle.
😄😄😄😄😄😄
@@robastore91927
yea, dude clearly broke again
yes
Don't underestimate the qualities of a good broomstick, though!😀
Надо было на суперклей приклеить - надежней было бы 👍
На проволоку .а домой приедет - как следует на изоленту примотать
A perfectly executed repair. This axle shaft will last a lifetime as a mailbox post👍
It is not a perfect repair, rather it seems like a temporary patch because it always ends up cracking and splitting in the same places that it broke before, and that is because it is a cold weld with different metallic materials joined together or similar, so sooner or later it will break. It starts again in the same place due to pressure and overload, which is why a complete joint depending on the metal is not the same as a hot or cold weld.
Untuk d pajang tidak untuk pengoprasian
It is a joke @@mkelaras8428
It works perfectly fine quit being a hater
Это не работает, доедет до базара в лучшем случае. Только будет нагрузка и лопнет в тех же местах.
Axles break when you pretend your 8 ton truck can carry 30 tons every day.
При союзе у нас почти на каждом газоне или зиле была прикручена на раме запасная полуось, еще её удобно использовать как кувалду при бортиравке колес, вот это отремонтированая как раз вместо кувалды и годится, по моему
Откуда боядь вам всем знать вы свой АвтоВАЗ говно видели? Или тупите хором под дурачка? Да вы боядь имея заводы инженеров говно в буквальном смысле делайте и вот вы еще осуждайте людей у которых нет денег на новую деталь как могут так и живут. Вы представители автоговна не имейте морального права кого то осуждать у вас руки из жопу и и мозги там же
Это железный стержень автора этого ремонта😂
Подарите им изолетну а то че они мучаются с этой сваркой, только электричество жгут😂
Синий изолента 👍🤣
Pokrasit,smasat,wibrosit.
Они просто работают на ютуб! Знатоки как мы пол дня тратят на это 😂😂
Работа ради работы. "Прекрасно". 👏😆
Kelihatan pulih tetapi kekuatan nya tidak akan pulih... Waktu dan usaha... Biaya ahirnya justru lebih besar.... Tapi cara mereka memanfaatkan sumber daya yang terbatas sungguh luar biasa
13:40 Столько мучений с заклёпками, а там в основании этой щепки уже трещина)) Лучшеб сверху трубу надели и сварили
я думал я один это увидел...
@@manson5738 показалось
They repair (attempt) to repair everything because the cost of the replacement part. New part availability is surely a big factor. As for the strength of this shaft. Probably good If your hauling styrofoam. Labor to repair this is probably 5 dollars
Это все порвется при первом сбрасывании сцепления. Единственный вариант ремонта обточить концы, посредине втулку, концы обварить и на электрозаклепки для усиления. Я видел так привода удлиняют и ходит главное
@@user-jx4bn2iv7v вы хоть знаете зачем обтачивают под втулку? - чтобы центровка не ушла в процессе сварки. Если вы обеспечите ее другим путем или это некритично (например отбалансировать можно, низкая частота вращения..), то делайте как сможете. Хоть трубой обхватите.. Хоть кузнечным методом за неимением более технологичного варианта. При первом сбрасывании не порвет, эти трудяги на диване языком не молят-делают и работают-скоро китай догонят.
Да можно было одними хамутами ограничиться! )))
Now I understand how those vehicle tragedies where trucks and buses tumble down the sides of mountains happen. The crankshafts and axels in these videos are cast from random scrap metals at road-side forges/machine shops. These repairs belong on farm only vehicles with not more than 200 horsepower.
I spend hours watching these videos as they are quite entertaining. If the sun EMPies the earth and civilization declines, I hope these ingenious guys are my good neighbors.
That drive shaft isn't cast iron. It is a type of cast steel because cast iron woldn't make it out of the factory yard. If you look at the swarf when its drilled, you can clearly tell its cast steel and as such, it is weldable.Only the quality of the weld will determine how long it lasts subject to the load applied when the vehicle is being driven and in what conditions. Not that I am saying I would repair it, but needs must if the part is not readily available.
A shop is available at the bottom of every mountain.
Devaneios
Always wear safety sandals when you’re nailing a driveshaft back together
Notice that no one wore safety glasses while turning the shaft. They have used their "safety squints".
Отчаянные мастера.молодцы
The bad part is they actually think they fixed it
Very short life...
Каждый раз что то новое. А ведь у них машины с такими перегрузами,- которые мне на заводских запчастях и не снились.
А черенком от лопаты не пробывали заменить? По прочности примерно одинаково будет!
Даже после расточки видно что структура металла разная😂
How long did it last for after the repair. The Original metal had a fatigue fracture. Iam sure on the first overloaded Hill Climb it would have twisted right off again. Lot of patients and a good final job. BUT would not a new or even second hand axle been a better alternative.
It prolly won't last long if you're doing sweet smoky burnouts
Fez 3 furos enfraquecendo ainda mais a peça.
Если плавно будет трогается с места,возможно выдержит
Probably trying to sell the truck this axle belongs to with the 222 warranty.
They probably painted it and sold it as new.
Могли бы оставить и на хомутах
In indonesia we choose buy a new one, because that cost is more cheaper than repaired..
But this video is excellent to watch, thank you for uploading a good video.. 🎉🎉🎉❤❤❤
Será que aguentará a pressão ? Na minha opinião foi tempo perdido
😮я бы пластилином залепил
ВЫ В РАШКЕ ТАК И ДЕЛАЕТЕ
machining it down weakened it. It is not 100 % welded either. They had enough room to slide a pipe over it and weld both ends for strength. But even then, where the welds are, it compromises the temper.
i agree it will not last but they had to machine it down to get the bearings on
Perfeito parabéns, vocês merecem, nota mil, pois são profissionais mesmo
A pointless effort.duck tape maybe?
I would suggest elastic instead of tape.
Обязательно синяя
super glue perhaps?
Excelente trabajo
I usually love these Pakistani/Indian automotive repair channels for the skill, and craftsmanship with limited tools. But this is not one of those videos. This is pure horrifying hackery.
They either perform amazingly good repairs given the tools and materials they have, or the entire thing is a complete waste of time and maybe even a disaster waiting to happen. Unfortunately this video falls into the latter category.
It seems that the later group of videos is just created as clickbait. With the price of a AK up, you have to raise more money.
Mad max style repair, nice
BUENÍSIMO GRACIAS
Кривой электрод100% успеха😎
No hay garantia de que soporte un mismo golpe o uno menor el eje central no es el optimo quizas habia otra forma de darle consistensia a la reparacion dado que la soldadura es debil y los remaches soldados son facil de romperse.
Well done 👍
uma verdadeira obra de arte parabéns
Coulda used 20018 and no dice…..but, I do believe it held up better than imagined! I love these guys work ethics and ability to survive the hardest. Everything here is replace not repair…..there are boundaries I know this crossed from this point of view but none the less, very good work and efforts and I truly hope it put food on a lot of tables!
250 Полуляхов😂
کلا کا کاری تُجھے سلام
Wheelie great work. That axle lives on to shaft another.
BRAVO !!!!
Excelente
Si la pieza original no soportó el esfuerzo al que fue sometida... qué queda para una reparada así...
Estos trabajadores son muy hábiles pero aún con su destacada destreza no creo que igualen a la pieza original.
Seguramente el dueño de la máquina en la que trabaja esta pieza hará uso de ella con mucho cariño hasta poder venderla...
Un saludo grande para "templado" y "revenido" que no fueron invitados a esta fiesta...🙏🖐️
Très bon travail
Thank you so much, I needed a good laugh!🤣🤣🤣
Ótimo 👍👍
If different chains offer repairs that are always the same, it waste their time doing it or pay for it.
Hard Work Man !! Congratulation for your job 👍🏽
Теперь с этой полуоси можно сделать лом, землю рыть😂
Should use panel bond that car manufacturers use to glue panels together. 100% guarantee
Nice work but it won't last a day 😊😊
Amazing
гениально
Интересно по какому они тех процессу это делают. Скорее всего там же и сломается. По мне лучше бы забужировали.
Should have just put elastic from the wife's knickers on it and not bother with the welding
молодцы, работают а не советы дают.
Good job
Just the circlips alone would have the same strenght..plenty if the engine
is about 3 hp max.
Да и хомуты это тоже перебор, синей изолентой замотать и збс
Покрасят и продают этот хрень в соседней деревне😂
I have my doubts about the integrity of the axle. I don’t think it will last
Есть подозрение что у пакистанцев много свободного времени раз они вот этим занимаются .
Да но мало денЕк
After installation the propeller shaft worked for entire 36 seconds.
05:56 at the right side, you can clearly see another crack asking to be break...
13:10 again right side, basically broke...
that's crazy!
Aha, ! The old diesel injector needle centre punch trick!
Some things shouldn't be fixed.
This is neither safe, nor likely to last.
If a solid steel shaft cannot take the stress without fracturing, what chance do you think that two halves welded and riveted together have? More chance being struck by lightning!
سلام عليكم عندي شفت مال طرمبه ٦×٦ يصير الحام في الولدن عليه وكصه في المخرطه لو ينكسر
Genial 👌
As good as new!
Voids, slag inclusions, and hard spots make the repair perfect for static display.
Its better than nothing, if this would be emergency repair in middle on desert its ok. but if they think this is ok to do this way its very dangerous thing😂
Uma fratura complicada viu! Será que suportará a operação?
Parabéns pelo trabalho perfeito.
DAT MY BOY RAJ, SKILLZZZZZZZ
Will work just fine
Perhaps it was good enough to get the truck to where it had to be.
This is not called amazing skills. This piece cannot be repaired. And even if it was repairable, they did not follow welding best practices. There is no pre-heating, there is no cleaning the pieces that need to be welded. So basically they repaired something that is beyond repairable and they are putting many lives at risk. It will break very soon. It will not last.
P.S. the pins are absolutely useless. They will not add any strength to the piece.
Good
iki taraftan bozuk olan kismi kesip disli sistemi yapip baglanti yerlerini kaynakla doldursaydin daha saglam olurdu ici bos kaldi en ufak zorlamada yine kirilir . 😊😊😊😊
great repair for a signpost.
A reparação com cola quente seria muito mais rápida para um resultado semelhante.
If they put that axle in a bus. I will not in that bus. The axle is a widow maker...
Пойду выпрыгну с балкона,может полегчает....
😂
Mucho torque en esa zona,,apenas durará unos días,,
Слишком сложно, можно было синей изолентой заматать. Надёжность та же! 😂😂😂
حدث شق عند دق المسمار الثالث وما بعد ذالك كله جهد ضائع
Di ganti saja As nya....! Moment puntir nya sudah Optimal tidak akan lama akan patah lagi di tempat lain.
Сделано норм только работать она не будет потому что надо было разрезать до середины и нормально варить с одной и потом тоже самое с другой стороны
اعتقد عمل هالفيديو لكسب المشاهدات مستحيل يكون ركب القطعه على مركبه واذا ركبها طمنوني اذا مشت المركبه متر او انكسرت من اول ما حط الغيار الاول 😅😅
Пойдёт доехать потихоньку до ближайшего магазина и купить новую полуось.
В таких случаях изолента сильно выручает
Arreglando por un lado y rompiendo por el otro. Y todo disimulado con una rectificada.
If im not mistaken this repair is called the " spike and twist " when you go to the shop ask for a spike and twist
لما تحصل جمهورية باكستان على القنبله النووية من فراغ ، جمهورية عظيمة وسند عظيم لنا في المملكة العربية السعودية 🇸🇦 🇵🇰
Kalo di Indonesia
As yang crack di buang
Tapi mekanik PK telah mampu membuat sesuatu yang melebihi dari yang kebanyakan orang
Clearly a waste of electricity and welding rods
Até entendo que nesses países a escassez de pecas seja grande, mas nesse caso o conserto so foi feito pra gerar conteúdo no CZcams.
Hi,guys what? the name of this machine.
Eu acredito quê; se os indianos fazem assim, é porque é assim o jeito certo de se fazer.
4/4/2024, 7 months later. Has the repair held-up as well as this video?
From all video repair that I watched and I think most of that are reasonable if we look at the price for the new one. But this is unreasonable
that axle has a hidden story, it was broken before in that same area, and broke again, that is one way to keep a shop in business, see you again in 5,000 miles?
Ржавчину надо было почистить