The Axle of a Truck Broken in a Strange Place // And the Masters of Metal Fixed it Using Magic
Vložit
- čas přidán 12. 07. 2023
- #truckrear #axlehousing #cracked, #repairbroken #rearaxle #tuberepair,
The Axle of a Truck Broke in a Strange Place ,, And the Pakistani Mechanic Fixed it Using Magic
#axlerepair #truckaxle #brokenaxle #strangeplaces #pakistaniskills #mechanic #fixedgear #using #magical
#ось #грузовика #сломалась в #странном #местечкотанкиста
#Die as van 'n #vragmotor #gebreek
Axle na Babban Mota Ya Karye
Proces #popravke #slomljene #osovine #kotača #kamion a
#Procés de reparació de l'eix de la roda trencat del camió
Repairing Process Of #Lɔre a #Abubu Wheel Axle
#Proces #naprawy #uszkodzonej #osiyo #koła #ciężarówki
It's important to appreciate the skills and craftsmanship of professionals in various fields, including mechanics, as they continually strive to find solutions and overcome challenges that may appear insurmountable to others.
#welding #an #axle #housing #amazing #process - Zábava
One thing I still haven't been able to understand is where are these squirrels that are in all the videos making these little noises... I haven't been able to see any of them yet but they are always in the videos... There must be a lot of them because they play all the videos. communicating with each other, with these little noises...
Im sure they are Chipmunks, but as you say, invisible ones
🤣🤣🤣🤣
Как обычно , нет таких проблем которые бы мы не смогли себе создать,)
прикрутите корпус дифференциала , и по отверстиям не пролетите и в плоскость попадете ,
Они еще дифер не сварили!!!! Пока мост делают а посля дифер
Просто тут обратный процесс. Сейчас по корпусу дифференциал отолтют в сборе.
Подскажите нахуя они этот треугольник вырезали а потом вваривали?
yes shukria good
hmm
Страшно представить, сколько же они грузят?
Если чулок моста лопнул пополам 🤯
Thanks
он не лопнул, сварили из двух
One side of the nut assembly should have had a smooth bore to be able to pull the two halves together. Having both sides threaded will not allow the halves to get any closer than they are when welded.
Thanks by Wow Mechanics1
Просто установить редуктор и потом сварить эту конструкцию точнее получилось бы
Agree !!!
Yes, but the "wow" team, as you can see, does not know this, the lack of logic, but anyway they work hard. All respect to them.
I was trying to figure that out too. They serve little purpose other than the alignment is all I could figure out. I have so many questions about the process.
It was cut in half to make this video. Nothing breaks that perfectly!
Just for content,not to reuse in a vehicle
It broke on the previous weld, you can see it about 3-4 minutes in.
@@12time12 I don't think so. Looks more like cut by plasma cutter ;-)
Thnks
The slag did give that away
This is exactly why you have 50-60 year old trucks and buses still in operation in Pakistan/India and the rest. I remember as a boy, (I'm in my 60's now) a place near where I lived dismantled trucks and buses of the era and exported the parts to these countries where they are still in use today. This is simply because they are repaired and not scrapped like we do all too easily in the west. They are the original 'repair, reuse and recycle' nations. Respect to them, the west could learn a lot from them.
Very Thanks you By wow mechanics1
Это из-за нищеты.Не от хорошей жизни и уж точно не забота об экологии..
who gave you this information that 50-60 year old trucks are in operation in India. Here diesel vehicles cannot operate for more than 10 years and petrol and cng 6:44 vehicles are allowed only for 15 years.
@@mukku9090 ok, so maybe not now but over 50 years ago re: the first part od my post is correct as I knew people who worked there at the time. Thanks for the correction on the second part, I appreciate it.
its called health & saftey. something thats not so readily available in india.
A neat little job .A couple of observations,
though :
1 . Top notch fabricating. Work with what you have .
2. Boots gloves safety glasses would help them out .
3. Get it up off the ground. I would build a fab table. Instead of working on my knees !
4.Some old timey classic country music . You know Cash Waylon Willy would do !
5 . Some Beers don't see no empty crushed beer cans ?
It wouldn't take much to straighten that axle housing out .....!
Если снимали мост, то и редуктор сняли. Можно было прикрутить редуктор на место, и он бы сам выставил половинки моста ровно, и обварить трещину. Без этих гаечек-болтиков.
Our pleasure! sir
I've never seen these broken, they must abuse that heck of these trucks, now if it broke as original, will it hold welded like that?
А зачем вообще его разрезали?!
И зачем весь этот цирк с подгонками? Возьми редуктор и скрепи им обе половинки, вставь полуоси и спокойно обваривай - ничего никуда не сместится.
ye right
Это волшебное шоу с гайками и болтами, которое не регулирует ничего)
Похоже его сварили из двух. С гайками тоже не понял в чём смысл был этого ритуала.
@@MRooodddvvv, гайки вообще бесполезны были, потому что они ничего не стягивали. Ну разве что просто удерживали две половинки.
That's what I was thinking, they could assemble it with the parts that's supposed to go in it, use the parts to align the housing then weld it up. Take the guess work out of it and be assured alignment is spot on unless of course they didn't have the parts on hand.
ผมชื่นชมทีมงานมาก ที่ทุกอย่างซ่อมได้ แต่ด้วยความเคารพ ถ้าประเทศไทยเราทิ้งไปแล้วจริงๆ ชื่นชมว่าทีมงานมีฝีมือมาก ขอบคุณ
Гарантийный ремонт.
U r right but it's look like genuine, but u can't complain warranty over here
@@aamirmalik9987зачем треугольник вырезали ,а не сверху наварили ?
@@user-yu5by7nb8rизменили направление усилий (направление сваревоемого метала PS смысл в том что таким образом они усилили(как не странно
судя по увиденному это просто имитация работы рассчитанная на диванных зрителей, не более.
....
Да вы совершенно правы,это видео рассчитанное на просмотры,но не как не ремонт.
O que importa foi a ideia mostrada, você faria o mesmo ? 👍
Eu sempre aprendo alguma coisa vendo estes vídeos... Obrigado amigos ! Usem sempre equipamentos de segurança..👍👞👓
Какую функцию выполняли приваренные гайки? Для регулировки соосности если, то каким образом это можно сделать этими гайками??
yes
это как спрятать голову на против человека и думать что он тебя не видит🤣🤣
In an after note, the weld held until the driver overloaded again, about 6 hrs after he got the truck back.
hmmm tnks
It's amazing what can be achieved when there are no safety regulations to adhere to. :/
Mostly involving a badly welded truck ploughing into a school.
@@snowflakemelter1172 And the rest. I was being sarcastic not admiring. Human life is cheap over there, they'd be more concerned of the cost to rebuild the school.
hmmm tnks
hmmm tnks
or any warrantees
Back axles have been wwelded up from pieces for many years and never really fail thanks to weight regs and weighbridges making overloading an expensive criminal act.
This repair seems to be two good halves welded to make one.
I'd have welded on some extra strengthening pieces but then in normal use does th ebanjo get massively overloaded
Lots of these vidoes feature truck axles that have broken at one side due to wear and overload and bad roads so I think here they took two good halves to make one good complete one.
Thanks
Mashallah This mechanical work is very best opportunity to work and those people doing work are really work hard to renew these cars and they are not work only for their own purpose they work for our country to build up so best of luck
good shukria g
In the Western world these items would be scrapped, kudos to these guys making the repairs!
Our pleasure!
Can you imagine the load, or shall I say the overload, this truck was subjected to.
Thanks 👍
Eles tão certo é um meio de expor todo o trabalho de recuperação dessa capa do eixo trazeiro de caminhão ou ônibus parabéns pra vocês rapazes ok
The triangle patch puts two of the primary welds into greater shear stress. Welds are ideally placed in shear. This welder/fabricator is good.
Thanks Sir
Thanks, I was wondering about that.
Very smart and well executed.
BEAU travail messsieurs ,vous ete de professionnels
Новый мост, только с завода! ))) 🤣🤣
Скоро в РФ все мосты будут такими ...
"Не бит, не крашен, но очень сильно "люблен" во все оси..."
hmm
Можно было сразу установить редуктор чтоб выставить ровно чем болты с гайками
Герметик и напильник все исправят)))))))
hmmm tnks
Тем более 2 гайки не дают возможность ничего регулировать
I would consider it an honor to work next to these guys ANY day of the week and in the same conditions!
welcme to Pakistan Whatapp no 00923005784980
Great resourcefulness, but can't help think that better edge preparation would have helped long-term as well
World builders...
I'm always fascinated by people applying their skills so dynamically. I wish I had teachers like some of these workers around me. Damn, what an opportunity that would be.
Thanks by Wow Mechanics1
Fascinating, yes, we don't see repairs like this except maybe on farms where the repair is critical. I see the reason being the disproportionate values of material parts and labour. it is amazing what can be done with a welding machine, and there are some very skilled workers out there. The parts alignment alone is quite daunting I think. Enjoyed!
I'm curious how all of the bolt holes line up once they get it back to the truck . I guess they can fix anything with enough welding rods and hammers . But why did it crack in the first place , over loaded , bad roads ? Both 😂
Its not a new banjo so its cyclical fatigue cracking the banjo. Together with overload or bad design and craftmanship. Its a welded banjo, like Scania has, I worked at the Scania factory where the banjo was manuf. There was some thermal stress relieveing operations on the scania banjo. So i believe that whne welding a banjo the devil is in the details for long life. A small material defect like poure or a welding defect at the high tension spot reduces the fatigue life a lot.
It looks like it was cut in half. Maybe to facilitate taking it apart after a seized bearing. I home this guys are religious, only prayers will keep it together.
hmmm tnks
Damaged on opposite ends of 2. Cut off the bad left from one and the right from another. Then weld 2 good halves together to make one usable housing.
Stop hating 😂
Можно было бы прикрутить корпус дифференциала и варить
hmmm tnks
Esse caras são os mestres na arte da Solda!!! Parabéns um belo trabalho👏🙏🏻✌🏾👍👍👍👍
Welding is not done without opening the weld mouth. to make weld mouth they should make V mouth.
hmm Wow....
hmm Wow....
Those chipmunks get everywhere
Осталось покрасить и в чермет сдать 😂
hmmm tnks
Соосность нее не слышали 😂. Почему не поставить редуктор и тогда заварить ?
hmmm
😂 ç est découpé exprès pour l export 😂😂 c'est considéré comme ferraille
I love watching skilled welders
hmmm tnks
THESE GUYS ARE SIMPLY BADASS, AND AMAZING. GOD BLESS THEM, AND PROTECT THEM TOO
Thanks You watch vist my video By wow Mecahnics1
These repairs are phenomenal when you consider what they have to work with. Adhering to Standards that don't exist are of no concern.
hmm Wow....//
Thanks for the update
Lets hope they not work on an nuclear power plant!
These dudes have a Titanic size set of skill, but they adhere to a kayak amount of standard or regulation.
This is good for immediately selling the truck without the new owner knowing about this repair. Otherwise, this will break after three weeks again.
Melhor que o original 👍🔥🔧🔨🔩
Super inventifs, les mecs ! **Voilà de vrais mécaniciens de l'enfer !!!
Our pleasure!
Anyone know what electrodes they use here. I can never get such powerful welds with ordinary stick welding but in Pakistan these welds are incredible.
Welcome Sir
My Whatapp no -- 00923079516772
GOOD JOB RESPECT 🙏👍🇧🇪
Сами распилили, сами заварили😂😂😂
Thanks by Wow Mechanics1
It's Amazing All these Guys Aren't Blind , No Safety Glasses or face Shields, No Welding Helmets ! A Lot of these Guys Weld with Sunglasses or Cardboard with a Welding Lens taped on!! 😂😅😞😳😮
hmm Thanks watch my video
esse triangulo no final me quebrou, nunca canso de aprender com esses indianos
I arrived at my grandfather's house a welder with more than 60 years of experience and I saw him shocked and destroying a table that had cost him more than 10 thousand dollars that he used to weld precision parts. I asked him what had happened, and he showed me the video, and he told me it is impossible that our land in America is so uneven and from that moment on he would weld on the floor.😔
Q
@@carlosalfonsomaciaszambran5887 no entendiste ni una papa mi sarcasmo.🤭
@@liomio4980 I can understand why
@carlosalfonsomaciaszambran5887 did not understand your sarcasm your grammar was pathetic.
yes
I can understand if you lived in Washington DC....I would agree with you that that land is crooked and not straight 😂😂😂
This is indeed "wow", but in the good kind.
Do not believe it broke but like watching it fix.
Thanks 👍
So nice👍👍👍👍
Главный вопрос: зачем он был разделён пополам? :)
Лопнул от перегруза, видимо.
hmmm
После предыдущего ремонта развалился пополам
Ну, шоб заварить опосля))) Нипанятна чтоли?))) Свиноворот свиней так сказать
They checked everything except if the diff. housing bolts will line up or wether the axels will line up with the diff. gears.
@guillermocarrillo3959 the repair was only for CZcams viewers it will never go back in service.
hmm
Amazing how straight it broke….it’s weird how it left slag behind when it broke! 😂
I think they used parts from two different axle housings. Then trimmed them to fit with oxy acetylene. Hence the melted edges on both parts.
Our pleasure!
Our pleasure!
Muy bien 🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉
When the world goes to s***, them are the people that are gonna be OK. They don't waste nothing.❤
These men love the drivers overloaded their trucks so they can have job to work on every day
ymm
It's a wonder the oil stained dhotis don't just go up in smoke when they are welding. Nice looking welds though..
hmmm tnks
Не думаю что этот мост долго прослужит
hmmm Yes
Два раза покрасят и станет крепче нового. В Пакистане почти всё на шпаклёвке и краске держится :)
Instead of cutting out the triangle and putting in a new piece. They should've put a long rectangle piece with rounded ends over the top about a 2 feet or half a meter long. Basically putting a truss on it.
Top and bottom and across the back of the diff. I thought they would have done that considering the future overloading it will be subjected to.
Thanks Sir
They should have done that on the inside and the outside.
जब वेल्डिंग ही करना था तब नट बोल्ट का उपयोग kyon Kiya
2 हेलपर टाके लगाकर भी लहर निकाली जा सकती थी
टाइम खराब कर रहा है अपना भी हमारा भी
Taj mahal bnana sikha rha hai
Они не ищут лёгких путей
es tarah se welding set andaz mn hu skty ha
Excellent work 👍❤️
hmmm good work by amazing skill
Почему бы не прикрепить переднюю часть и не прихватить по факту?
Мне тоже это показалось странным
yes
yes
very few material resources, but talented, creative and inventive men, well done!!👋👋
hmmm tnks
my only recommendation to ensure the 2 axel pieces are welded with the right amount of GAP: hold the 2 pieces together. Get the front portion of the axel (the part with the KING bearing)...... put 3 bolts on each side just to hold the 2 pieces in place (with the holes ready to accept the front piece of the axel)....then tack weld the whole crack while the bolts hold the BOLT-PATTERN in place. Thanks.
A very interesting repair to a cast iron split cast iron differential. I learned more again. Thanks.
Our pleasure!
am i the only one seeing this??......threaded bolt and two nuts welded on either side of the break.....and threads in both nuts??......i'll wait......someone will understand where this boat sank......
There is a lot wrong with this video including the two threaded nuts that will not tighten together .
Since when has anything ever broken a perfectly straight line down the exact center of a differential. Additionally in terms of over load breaking, the middle section is strongest part when assembled. One of the axle arms should break away before the center would break. Any break would also be crooked and typically run from a hole to another hole. Good repair, good welding but this does not look authentic, this housing looks like it was cut in half.
@@wirefeed3419 i assumed it was a salvage tube, the two busted halves were canned and made one good tube out of two dickered ones
@@piperdoug428 That’s possible definitely way more believable than being broken as claimed. Zooming in it sure looks like a cutting torch was used. I do give credit for the skills regardless of a couple flaws
hmmm tnks
hmmm tnks
Didn’t know the munchkins knew how to weld. Nice job.
hmm
Почитал комменты про редуктор, народ правильно всё понимает. И поэтому что бы афганские учёные ядерщики не предпринимали, у них всё равно получается анаша.🤣
Welcome Sir
My Whatapp no -- 00923079516772
Иногда интересно посмотреть технологии позапрошлого века
На сколько метров хватает такого ремонта? 😂
@@Wowmechanics1 1000
Или будущего..... Уже слашал историю о том как таскали машину на верёвке в Польшу потому что запчасти не пускает таможня из за санкций. Ещё немного дополнительных санкций, доллар по 300 и увидим такие технологии у себя.
В который раз уже этот мост дрючат...
yes right
In my country you take a job fix like this one to a mechanic shop and t he’ll tell ya “it’s!! Be ready in 2 weeks” you comeback in two weeks them lazy bums haven’t even started.
These guy are very fast and very good welders
Mantap
Salam kenal dari palembang 👍👍
Looks like it was repaired once before. these drivers don't care about weight. they overload everything,bicycles, carts, cars, donkeys and themselves. this unit will be back again. these guys are hard workers and just eek out a living.
Shukria jnaab
A ce niveau c'est de l'art
Prober field repair! Nice work
Greet work mack truck wheel hub repairing wxle
that housing was not broke in half ! you can see were it was cut in half with a touch ! that was all staged to make a video ! and that's ok ! but lets call it what it is ! how about calling it ! how to make one from two !
A very convenient crack in a perfect straight line 😂
Like you say, if it's a repair then that's fine, still a hell of a repair.
hmm thnks
ye =s you are right
You get jelosse .make your own content.
not at all i just call it as i see it ! just like you its bs !@@user-uq4gf4xn1g
Hermosa Linda Video ❤❤❤
hmm Thanks
Keren sekali
Verry good. ❤
Thank you! 😃
Main reasons: Overload, wear, bad roads and very hard and poorly maintained leaf spring suspensions that transmit shocks to the entire structure.
That is a breakdown almost impossible to see here in the EU, no one risks paying a huge fine and having the truck detained until the excess load is removed.
Here almost all the trucks have air suspension.
I would have took a good one. Unbroken made a plate for it. Took it off plated it to the broken. One perfect environment.
Very smart putting the triangle joint to prevent joint stress crack. Very smart.
hmmm
Wonder why they don't bolt the diff to it?
same thing I was thinking, that would line up everything instead of fighting as hard as they did
Me also...doh!
If they did bolt the diff in, they wouldn't be able to show off their new sandals!
Bolting the diff in place doesn't automatically make everything straight and aligned.
hmm tnks
Bravo, veliki pozdrav iz Slovenije 🇸🇮❤️❤️❤️
hmmm tnks
I dont understand why they never build workbenches or work of saw horses? WOrking at waiste high would be so much easier.
Me either, but I read somewhere that the Koran says it's against Allah to sit down or something like that. - But that still doesn't make any seance for not using a bench, either.
hmmm tnks
Gente dedita al lavoro e sacrifici. Rispetto a questi uomini
Great fun in Pakistan's
It would be great to monitor how this repair is holding over time. My guess is that it will depend on the extent of daily stress that the truck axle is under. Over-loading at this point is not a good idea. Under-loading a bit will keep the stress at a reasonable level. Amazing work and skill using what is available. Very impressive!
Shukria jnaab
Esto es una maravilla, creo que quiero vivir ahi...
Welcome Sir
My Whatapp no -- 00923079516772
a realy magic work but for a better result the sheet must be chamfered before welding because the area is subjected to great effort
Great point!
Came for the magic 🐇 🎩 😔 😆
hmm
These are amazing and beautiful day on work
hmmm
There is a execution error about the plan with the drilled holes before welding, not respected the plan with a blocked planar steel, second is the choice to remove a triangle, is better to add a steel on the brocked area
Excellent video. Weld done ! 👍
good
а прикрутить редуктор на место и не разводить всю эту возню с болтами и гайками
Thanks.. You Watch my video
Amazing work, like factory work
Thank you very much!
Миньёны 😂 это называется помыть, покрасить, и выбросить 😂😂😂
thnks
Przepiękne jest to odrestaurowane ten cały korpus pozdrawiam twórcę serdecznie 👍👍👍👍👍👍
thank 👍👍👍