NiMH to Li-ion Chainsaw Restoration | Black&Decker CCS818-JP (Older Model)
Vložit
- čas přidán 11. 01. 2022
- This product has been discontinued, I found this chainsaw from Japan recycle shop. I rebuilt a new lithium battery pack for replacing the original dead battery.
Black & Decker 18-Volt Cordless Electric Chainsaw:
- Weighs 6.2 lbs
- 18-volts
- 8" bar and chain
- Up to 150 1-1/2" cuts on a single charge
- 7" cut capacity
- On-board oiling with window to view oil level
- Cordless electric chain saw model# CCS818
- No load power 38W
Original Battery Pack
- Voltage 18V
- Capacity 1.5Ah
- Nimh battery (15 cells)
- No BMS
- Power 27WAh
New Battery Pack
- Voltage 18V - 21V
- Capacity 6Ah
- Lithium battery (10 cells)
- 21V Battery Management Board (BMS)
- Power 120WAh
The new battery can run this chainsaw for about 3 hours
Lithium-ion battery cell
- Brand model: LG INR18650HG2
- Standard capacity: 2800- 3000mAh
- Rated voltage: 3.6V
- Charging voltage: 4.2±0.05V
- Maximum continuous discharge current: 20A
- Discharge cut-off voltage: 2.5V
- Weight: Max.47.0g
- Size: Max.18.2×65.2 mm
- Charge and discharge times: 500 times
I hope you find this video useful and enjoy it!
Furthermore, I am happy to receive feedback, suggestions to improve myself.
!!! I'm sorry for the mistake if I did in this video !!!
Thank you very much for choosing to watch my video!
Have a nice day
Gear Show - Jak na to + styl
I love that my husband loves it. He cut down 2 20-25ft trees in our backyard. He said it saved us about $1,400; we saved the wood for our fire pit. Thank you!
Thank you for listing the motor as 775. That allowed me to save my chainsaw when the motor burned up when the chain was hard stopped due to a pinch.
Another great renovation.
When I look at your movies, how easy and quick it is, it makes me so much energy to run to garages and fix a few things.
Great to hear! Thank you!
@@gear_show ططخ
Job step by step...im like👍✌️🇮🇩
I REALLY enjoy your work. You inspire me to do my own restorations, customizations, and conversions! Thank you!
I'm glad to hear that, thank you!
Thank you for sharing this to me.
I love Black e Decker 2000's years
Okay, thank you for sharing!
good restore👍👍
Another great Resto, TBH didn't expect anything else
Nice. I am seeing your all video. Love from Bangladesh ❤️❤️🇧🇩🇧🇩🇧🇩
This is a great restoration. I have the very same chainsaw. You do not have to rebuild the battery for lithium ion though. You can buy a 20v lithium max adapter for about $8 and run it. Since I had Black & Decker tools that use 20 v lithium , this was easy. Worked great. Got much better performance out of the saw too.
I have the same saw also. I even did an additional mod. I replaced the 8 inch bar with a 14 inch bar and chain. Works great. I’m even able to use DEWALT batteries in it.
Good job.
Very nice restoration 👍👌
Thank you very much!
good job
I modified the Ni-Cd battery with 10 lithium cells 30A (4,5 Ah) as you show : The saw worked one hour non stop perfectly on 6/15cm branches (dry and hard wood). The only issue with this engine is chain oil : only on the teeth but not enough in the bar groove. I must be careful.....But huge difference compared to the Ni-Cd!!!
Excellent restoration 👍👍👍Thanks for sharing
Many thanks
Nice job,and very good chainsaw)
Çok başarılı bir li-on batarya kaynağı yaptın , tebrik ediyorum.. çok güzel bir işçilik.
Ça coupe, c'est tout ce dont on lui demande !!
Parfait, merci pour la vidéo...
De rien merci!
Great job, thank you brother. You are so talented
Thank you too
Great job on this one....
Those saws are kinda limited, but yours really worked well above average, for that size of cordless saw....
And besides your hard core work on these items, I really do love the stickers you make, for your battery packs. Very nice!
Thank you so much for the encouragement :)
Muy bueno, felicitaciones !
А где ваша звуковая ванна? Я уже привык к ней по прошлым видео 😁. Отличная реставрация и модернизация 💪.
An inspiration to us all. Happy New Year.
Happy new year! Thank you!
So nice.The battery weight is a real good balancer
Nice 👍
Thanks ✌
Q sangat suka video restoration Cordlessy..
Terima kasih atas kunjungannya!
Good evening, where did you learn to fix the machines that you fix in the videos, some school, or was it your head? Big hug from Portugal ..
Hello, I learn those skills from internet like google, especially from CZcams.
Комментарий в поддержку канала и ролика, а также труда мастера.
A quite convinient and useful tool
Amazing job congratulations
Thank you so much 😀
The screw closer to the camera at 7:05 didn't look like it got seated all the way down. Good job either way though.
Okay, thank you for let me know!
Great Job!
Thanks for the visit
Great!
WOW, what a Job! Perfekt. ;0)) Grüßle
Thank you!
What about the brushes on the motor. With such a great refresh I would worry about the condition of the motor and it’s intervals.
Love you bro
Thank you!
Quá đỉnh luôn anh
Pozdrowienia z Lublina 🇵🇱
Tight fit with the cells. Good work!
I've seen some manufacturers use LiPo pouches for cells in their batteries, would that work for your application? I'm certain they are more expensive/ less available for reuse.
Cool, Thanks for the info
Also more dangerous than Li-on, but more compact.
Li-Pol have much cobalt in it. So its chemical unstable and it will give less cycles than regular Li-Ion 18650. Sure it will give you huge amperage, also its very compact and lightweight. But I would not use it In my tools etc.
also its expensive as hell. So its something for something.
Very good restoration 👍👍...but on a useless chainsaw: because its biggest issue is that the chain runs really too low , perhaps a little faster with lithium pack? Would it be possible here to use 24V without damage for the motor?
I think this chainsaw is used to cut a small branch of the tree, your idea is acceptable, increase the voltage up to 24V, it will have more power.
@@gear_show Thanks! I will try with 5 cellsx2 like you. Do you really think this motor can support 24V?
Please how many amps did you take for the BMS?
Ты болт не закрутил в редукторе.
make this one a powerful brushless chainsaw 18v
Хорошенькая пила, Я такую купил бы.
По мне так 775-й мотор слабоват для этой пилы, надо было заменить на новый бесщеточный 😉🤓👍🏻
Is there any way except battery cells welder device to assemble like use something more simple and cheaper? In my country this device is very expensive
💖💖💖💖💖💖💖
역시 대단하세요👍👍👍👍👍
Love it Black and decker chainsaw
cưa xích quá ngon
Thank you!
Shouldn't the new sticker on the battery have 21V on it since that's what it was upgraded to?
Для похода самое то идля дома
Ti porto anche le mie...
Very Good! 👍👍👍
Thank you! 👍
🛠️
it's amazing
Nice upgrade you are amazing.
Did you buy all the tools you repaired or those was sent to you
Nice presentation 👍
Great work as always!
Guys, is anyone aware of a 5v Li-ion charge board? All I can find is 12V and up.
Use a smartphone charger
great 😍😍😍😍
Thank you!
Veryyy Gooddd....!! Ji ji ji ji.. Saludossss Amigoo..!!!
Thank you!
based on your experience of how much the bms should be (5s ?A)
Hi. I really enjoy your work, that is a great job. I have the same chainsaw and i have a problem with the motor: when I press the start button the motor turn for a half of second and stop. Please how can I solve this problem. Thank you
Please check the battery first.
@@gear_show the battery is good. I used a power supply to turn on the motor but always the same thing
finally you back to youtube
Yes, I'm back. Thank you for waiting!
Very nice restoration, but I'm pretty sure it needs a new chain. It should cut through wood like butter.
You are right! thank you!
it's a shame there doesnt seem to be any 4323 Li-Ion batteries to swap out those NiMH cells with 1:1, but this was very well done
Ficou muito bom mesmo
Obrigada!
@@gear_show كب
Tân cái máy đo cho tôi đi ông ơi
Could you do concrete vibrator 110 v to 21 volt please?
Хорошо грызёт.
Don’t ever get rid of your turntable cleaning tub. I like seeing the square plastic container
Видно что мощности не хватает))
Ну это ж сучкорез по сути. А он им уже серьезные палки пилит)
это детейлинг по моему или мойка))
Mantaaaaap 👍👍👍👍🙏🙏🙏
Крышка от проигрывателя пластинок?
Hi, could you tell us what software you use for the stickers ?
Maybe he use Adobe Illustrator.
I use Adobe Photoshop.
Love your channel would like to ask you where are you source your 18 650s from and how much thank you stay safe
I bought them from China, I'm not guarantee it is genius. In this video's description has link to this battery czcams.com/video/l2cPcoHZIfw/video.html
Соо1!!!
🤩
👍😉
Top as usual ... I suggest a more challenging jobs, converting brushed AC or DC tools into DC brushless. It needs replacing the motor by similar size BLDC motor. It will be challenging in speed control and heat dissipation and may require overhead protection, as I think. Gampate
Great idea! I will try to learn about BLDC.
👍
👍👍👍🙏
Could you make a video of the projects that failed or didn't work out if you have any?
❤❤❤💯
Thank you!
Türkiyeden selamlar
❤️❤️❤️❤️❤️❤️❤️❤️
❤️❤️❤️❤️❤️❤️❤️❤️
❤️❤️❤️❤️❤️❤️❤️
❤️❤️❤️❤️❤️❤️❤️❤️
Hi, great job Friend! Can you give me
link to the BMS? Regards from Poland.
Hi, thank you! Here it is item.taobao.com/item.htm?id=642858226266
Точить цепь лучше по специальному шаблону.
Even the shitty Black and Decker products of 2012 had metal gears... Now everything is plastic.
where ultrasonic bath ? )))
What do you do with your old gasoline?
I keep for burning something in farm.
잘 잘리네 잘했어
Nice job but this tool even in perfect condition is garbage :D
Yes, it was, the only problem is battery.
Can use 21volt 20amp BMS board
Yes, it can.
🥰❤️❤️🇲🇦🇲🇦💯💯💯 goooooood
Thank you!
Cho tôi xin mã nhãn hàng bôi trơn
It is kixx grease number 2.
Buenísimo si te mando una batería de un taladro me la harías de litio?
Por supuesto que lo lograré, pero me temo que estamos lejos.
Makita DDF482 can you wrap armature.We are waiting for your video