KYB TV Episode 3: How to Choose the Best Shocks
Vložit
- čas přidán 15. 03. 2021
- The best shocks, no matter how you are using your truck or SUV.
The best shocks can offer more than just a smooth ride, they can help restore your truck’s handling and control or even provide additional control when towing or hauling. All KYB shock absorbers are designed to the highest standards and are manufactured in the same facilities that build shocks for new vehicle manufacturers. We understand that people use their trucks and SUVs in different ways and it’s important to give people a choice when choosing the best shock for their truck.
If you loved the way your truck or SUV rode and handled new, we suggest choosing the KYB Excel-G. If you are looking for additional control because you are occasionally hauling or have larger tires and wheels, we recommend the KYB Gas-a-just. If you are doing full-time work with your truck and hauling heavy loads, choose the KYB MonoMax. KYB’s line of truck shocks ensures you get the best shock for how you use your truck or SUV.
Short to the point. Best KBY explanation video ever. Thanks.
KBY gets it
Kyb
It's the only brand I use on my vehicles , simply the best, ASE Certified Tech here, and have been working on cars since the 80's
I use KYB Gas A-just shocks for my old Nissan Frontier Trucks and my old Ford F-150 accompanied and supported with Sumo Springs (Airless Maintenance Free suspension bag) I use them for my Trucks that work so hard and carry lots of weights everyday.
I’ve got the Sumo springs on my Tacoma 4x4 also. And I love them. When I hook a heavy trailer to it,it don’t sag way down in the rear now,plus my payload has increased. I’ve loaded it down with concrete and asphalt and it don’t look like a low rider in the rear now. It rides a little more rough in the rear and is a little stiff but I don’t mind
I put the gas adjust on my 2005 Ram truck. The difference was night and day. It rides great now. Dodge trucks are heavy in the front. These shocks are great. And the price was n’t bad either. I will always buy KYB shocks from here on out.
I agree I just put a set on the front of my 03 ram 2500 Cummins what a huge difference, especially on the Pennsylvania roads I’m gonna throw another set in the rear
Got a full set of the Gas A Just struts and shocks on my P71 Crown Vic project car a few months ago. The difference in handling was huge. Braking and acceleration were improved and overall responsiveness is impressive. Car felt like it lost 500lbs. Highly recommended! Just wish you could get a fully assembled strut instead of transferring or compressing new springs.
Yeah I put them on my 05 grand Marquis. Way better ride. I recently replaced the coils with a performance upgrade for the 04 marauder. And cut one full coil off the lowered it 2”.
@@adammammana367 Nice! I needed to keep stock ride height just because my car sees a lot of different terrain lol
I have 95 grand Marquis, i want the smoothest ride possible, which one I should go for?
@@openreviews1209 I love KYB stuff, but if you got a 95’ go with Bilsteins shocks. They’re phenomenal but the don’t make them for the 03+ cars.
So do you suggest the excel g for a Suzuki samurai? I use it as a normal vehicle and going off road sometimes
That’s hilarious, I found this video while researching which struts to install in my 2004 Thunderbird and on the back wall is a picture of a black Thunderbird of about the same year. No one anywhere has a picture of a 2002-2004 Thunderbird on their wall. It’s a sign!
one of the best bang for buck! I hope kyb does more underchassis parts like ball joints and bushings!
Me sirvió la explicación, ahora comprare los KYB gas a just para mi Hyundai galloper
This video is really well done. Makes me wish most explanation videos are like it.
Boom! I now know which one I need for my slightly upgraded Samurai! Thanks for the simple and to the point video
So, which did you choose? And how does it ride??
I'm looking to upgrade my Zuki also. 🎉
I put a set of the gas-a-just on my 01 Grand Cherokee w/4" lift and 31" tires. They are about 3 years old and ride exactly like they did the day i put them on (approx. 45k miles). They ride much MUCH firmer than stock. Especially in the rear. The Jeep is my work vehicle, i do remote welding on farm equipment and pull a trailer with my welder and tools so the stiff rear is great for me. I like the sportier ride, personally and they noticeably reduce body roll in corners. On little bumps/wash boards they are harsh at low speed. However, the faster you go, the better they get!
Going to put KYB front strut assemblies on my truck and the gas a just rear shocks
This is an excellent video. I have been considering the KYB shocks for awhile now. After hearing you explain the difference of the shocks, I have decided which ones suit my needs best. I'll be purchasing a set of 4 after this post. Thanks 😊
good thing i bought an excel-g for my mid-sized SUV. gas-a-just for my small, nimble crossover.
I only use KYB or Monroe on my shock absorbers ! Never been satisfied
Installed the KYB Monomax on my Ram 2500 4x4, Much Better Response an Control! No more body roll" By Far Best Shocks I Ever had! Handles weight Really Well on my Truck" 💪
Are these shock better than say an original factory part the vehicle came with?? I have a suv I want a nicer ride but also plan on hauling small items like jet skis or a small travel trailer nothing too heavy under 2500lbs.
@@americantopgunner5102 gas adjust monotube the silver shock is probably the one you're looking for.
@@craftman5632 I guess they dmt make the gas adjust for my Honda Pilot. Went on the website they recommend a basic shock for my vehicle. I would like the gas adjust but might not be available.
I always buy the Exel-G struts to rebuild their coilovers for my customers vehicles. And never had any complaints. I recently purchased an RX-8 to flip. It had the suspension upgraded to the Gas-A-Just struts, and wow it's f'n stiff lol. Feels like its dialed in for track. Crazy how different the shocks are compared to OE replacement shocks Exel-g's are to the Gas-A-Just.
The one that helps with potholes in preventing more damage to other parts.
Probably gonna be the mono max
Excel-G for everyday normal use, never tows, never leaves pavement
Gas-A-Just for every day use and some light work a homeowner may do from time to time and occasional towing
MonoMax for dedicated work truck that is always loaded or tows daily or dedicated off road truck
@@hungryjack8032 Well said!
@@hungryjack8032 He said "potholes".
@@lovegansaw He didn't define potholes.
Compare potholes to Swiss cheese.
Baby Swiss with many little holes, Excel-G
Aged Swiss with large holes, Gas-A-Just
Holes that make the Swiss cheese disappear, MonoMax
Thanks much for the explanation. I mistakenly put on heavier rims and I feel it immediately, the oil kyb shocks I noticed can't handle the weight so now I know to buy the gas shocks
I just bought the gas a just front and rear fir my 2003 montero still need to install them but I can't wait
I bought some Excel on my minivan today they are as good as advertise
Of course they are ... I purchased kyb gas a just for my rear and momomax for the front on my old school Ford f150 ... The gas a just cause I don't really haul heavy loads like that rarely .. and I don't plan to abuse my truck like that either
I just converted a 2000 Chevy Astro AWD cargo van into a camper. It's got 142K on it and I'm going with the monomax.
Tbh i work / off road all my silverados and tahoes and I love the excel g for hard off roading and towing they ride so smooth
Great Video, I have a 2019 Ford F350 Crew Cab, Diesel, SRW short bed. Now I pull our camper 5-6 times a year and the factory shocks on the truck work just fine, great ride. Would you recommend the Excel G or the MonoMax? The 5th wheel is 15000 lbs loaded. I still had no issues towing it.
We have recommended factory replacements and monotube upgrades for that model. If you like the way it performed from the factory, then our OE replacements might be what you're looking for. However, we'd recommend plugging your information into our online catalog at kyb.com/catalog because we make many parts for that platform and the various trim levels within it. Feel free to reach out to our tech. dept. if you have follow up questions by emailing techsupport@kyb.com.
Thanks, I ordered gas-a-just with avs for my lexus gs.
I have the gas adjust on my 1999 GMC Yukon Denali going to upgrade to the monomax shortly 🧠💪
How did you like em? Thinking about putting them on my 1995 K1500.
Probably not a good idea unless you tow or load down the vehicle. Monomax were too stiff for my vehicle weight. I go offroad, but I do not tow.
had them..bilstien too
Pedders coilovers w external canisters
I've got the monomax on my 3rd gen ram and love them. I was going to get the gas a just for my 1st gen ram !
How was the ride quality was it like stock?
@@--emt I did find it was like stock. And with a full 8 foot box she didn't squat down in the back i sold that truck a few months ago and miss it every day. I would recommend them
@@--emt I also do now have the gas a just shocks for my 1st gen ram. And those will be going on in the spring
@@hobbyavenue6740 I have a 17 ram 1500 big horn 30k miles ,given it is 5 years old the shocks aren't were I'm looking them to be .I was going to go with the strut a plus complete strut assembly so I don't have to compress springs etc, they are the kyb excel-g with the spring I don't do towing or off road but the potholes are terrible in massachusetts the excel g is supposed to be the closest to OEM but you have experience with the gas a just and mono max I know the mon max is for heavy loads but I won't be doing that . I am stumped at what I should get for my ram the bilstein 4600 series looks good also .I want the smoooothest ride possible!!!!!
@@--emt well man you really can't beat the ride of a bilstein shock. My buddy has them on his 4th gen ram and he wouldn't put anything else on but. I live in eastern Canada so there isn't 1 road without a damn pot hole and I found the Mon max did ride more stiff but it still soaked up the bumps pretty good. I had them on the front and back top of course. If you're looking for a good budget shock that'll last id recommend them to you for your truck. But the bilsteins are nice too but more expensive and I think you'd get that smooth ride you're looking for as the mono max too me is more of a rugged off road work truck shock.
Direct to the Point in this video... Thumbs Up...
What is best choice for dirt roads, including mountain trails?...
Now have larger-than-OEM tires. Went from 235/75R15 to 31x10.5R15.
No towing.
Tried Excel-G, but they wore out too quickly.
Tried Monomax, but only felt good for 1 month. After that, compression phase too stiff and extension phase too weak.
I got tired of looking for a set of coil and struts online but I only the left was available. Low inventory of kyb
Thank you for the clear explanation. I'm in the market for KYB shocks for a Toyota Fun Cargo 2003, which I use to transfer loads up to 400-420 kilo daily. Thanks to this video I now know which one I have to choose.
Can all these 3 shocks be use in all type of Toyota vehicle?
Glad it made sense for you!
Apologies, but we're not familiar with that Toyota Model in North America and don't know what's available in your area. Please refer to the KYB automotive aftermarket company in your geographic region. The short answer to your question, is no, we don't make all three lines for every Toyota vehicle and trim level.
KYB fit and finish is usually above Monroe or Gabriel. Very often similar to Bilstein or Sachs.
In the process of turning my Prius into an Overlanding rig and will carry heavier loads with a cargo box and roof mount,
Which would be the best In this case?
Fun project! Our tech support team can offer some assistance with your questions and can be reached by emailing techsupport@kyb.com.
Just purchased struts for my truck and really wanted to use KYB. The only place that had them affordably was RockAuto. The reason I went with Rancho is that I could get the fronts and backs at the same time in 3 days for 1 shipping rate. The KYBs were going to ship from separate warehouses which doubled the shipping cost. I went with Rancho.
Couldve just bought from summit...
Settling with the Ranchos was a big mistake, definitely should get the KYBs or even better, Bilstein.
@@aaronfrench8322 so far so good. Took of Ranchos and replaced with Rancho.
@@MrMblood09 the increased cost of purchasing from Summit out weighed the benefits of getting the shocks at the same time.
I went with a gas a just because I have an older vehicle and I don't think the installs shocks were great back then even though I don't plan on towing things, it is a truck and heavy on its own
What is meant by performance ride. I live on really rough roads and do some work out of my first gen pilot. The ride I’m looking for is the softest or most absorbent.
We'd recommend checking our catalog to see what we offer for your vehicle and trim level before deciding on which part you're interested in: www.kyb.com/catalog/
The ride you say you’re looking for would be our OE replacement parts, Excel-G and Strut-Plus. Performance upgrades offer more control, quicker steering and better handling.
ExcelG is softer but did not last very long on my vehicle. Disappointed.
If i put the monomax on my 2005 toyota camry, would that be okay even if i dont tow or haul a ton of weight? I just want new ones and the smoothest ride possible, as long as it wouldnt hurt the rest of the vehicle?
MonoMax is for trucks only, so you won't be able to find any for your Camry. We have Strut-Plus complete assemblies that will help restore your vehicle's ride to how smooth it was when it was new. They offer a new mount and spring along with a new OE replacement strut, you'll definitely feel a difference and bring some handling and control back to your car.
@@kybamericascorp thank you!!
I need a good set of front struts for my 05 caravan. The reviews of other mfg's shocks are that they are to soft and sag after several months. I hope KYB's are better.
Bought some KYB Excel G that said would fit my 2004 Saturn Ion and they didn't fit, the tubes sticking out of the bushings were too long . Sucks cause now I have to return them and have to go buy some other cheapers ones.
Our customer support and tech support departments are happy to assist with figuring out what fits your vehicle or if you run into issues along the way. Have you reached out for any help?
Best how too video
Funny that nobody uses Monroe in US
Hi sir im currently using triple s lowering spring on my toyota (mid size suv) my rear is very bumpy they say i have dead shock, can i use kyb excel g for the lowering spring?
We recommend reaching out to the KYB tech support department with technical questions. If you are in North America, you can find that info on our website, and if you are not, please contact the KYB company in your market. If you are in the Philippines, the web address that hosts that info is here: www.kyb.com.ph/contact-us
@@kybamericascorp thank you
Nice video. I’m thinking of getting shocks for my vehicle but some say ( Self Leveling ) and the KYB I was looking at says ( Except Self Leveling ). Could you explain what these terms mean.
That means our coverage is not for that suspension package. We fit check & test our products on vehicles and they are calibrated to perform with certain amounts of weight & other vehicle characteristics. If your vehicle comes with self-leveling suspension and we list that our part is not recommended for that trim, then that means we don’t offer coverage for your specific vehicle. We recommend the OE replacement for the self-leveling suspension, even when we don’t offer coverage for it.
@@kybamericascorp I been looking all over the internet for Kyb struts for my 2013 Kia soul and they all tell me they won’t fit any advice or suggestions please , thank you .
@@Isaiah-er1ot Have you looked at our online Catalog, www.kyb.com/catalog? We have a search by application function that should tell you everything you need to know. We currently have rear shocks and the front left and right parts should be released later this year.
If you need further assistance, we have customer support and technical support teams, email kybcs@kyb.com
I recently bought a 2001 Buick Park Avenue Ultra 90k miles, but I found that it tends to continue bouncing after it encounters an uneven roadway. This continued bouncing is documented in a few magazine articles that reviewed these cars when new, so I don't believe it was caused by wear. I really dislike the bouncing and I was considering a Monroe OESpectrum strut for replacement, but I'm also interested in KYB Gas-a-just if these are available for my car. I assume the Excel-G is going to be bouncier than a Monroe OESprectrum. Is there a KYB Gas-a-just strut that would be compatible with my car? Is there an old part number that I should consider hunting/tracking down from various vendors that may have old inventory?
Please get in touch with our tech support and they would be happy to assist you, email techsupport@kyb.com
And avoid Monroe shocks and struts. I say this from experience.
Where's the fourth option, old school Cadillac or Crown Victoria ride that can glide over wash board roads and man sized potholes?
I like the firm ride of the gas adjust but now my car is higher in the rear?
Higher than OE or higher than it was? Worn components lead to sagging over time, and generally, springs set the ride height, not shocks.
Please contact our customer or tech support teams if you have a question about your vehicle.
Always wondered what the differece is between mounting shocks in front of the rear axle or on the back of the rear axle?
An expert should probably answer this in something other than a CZcams comment section, but the short answer is that it has to do with geometry and the performance of a shock due to the angle and position they’re mounted in.
Please remember that a commuter car, a sports car, a fleet work truck and a purpose built rock crawler all have different reasons for where their shocks are mounted, plus what type of shock and spring they use. Hope that helps!
I have a 1997 Sierra C1500. I want better handling but not a rougher ride. so your saying the Gas adjust would be best?
hi, i currently have gas-a-just in my pajero and actually like the firm ride.
now i'm thinking of getting Skorched4 in a pickup for touring. how do the Skorched4 compare to the gas-a-just?
thanks!
Our apologies, but that vehicle and KYB product line are not available in North America. Unfortunately we wouldn't be able to help you because we have no experience with them. Please see your local KYB representative, local parts store or mechanic to learn more.
Sadly about 80% of struts and shocks I have got out here in CA had come defective from factory… always come leaking or with no back pressure.
From KYB???
Have you contacted our customer or tech support teams if that's case?
How to tell if a kyb shock has been copied ...an what to look for to know its derffrents ?? Thank you
Generally, looking for a KYB sticker or stamping is going to be the best bet. It also depends on if we're talking about KYB OE or KYB Aftermarket parts, there are some variations.
We'd recommend reaching out to Tech Support with pictures of the part. The can be reached by emailing techSupport@kyb.com
I have a Toyota Hilux 2009 model and I don't carry heavy loads in it. What the best KYB shock absorber for the best comfort?
Unfortunately, I don't think we can offer any assistance. Since we don't offer that Toyota model in the US or Canada, you'll probably have to contact the KYB company that covers your region.
Nice video
I will be towing my RV trailer with my Ford police interceptor SUV utility. What would be my best choice for towing heavy loads?
Please check our online catalog to see what we offer for your specific vehicle, then you can decide which product suites your needs: www.kyb.com/catalog/
You can search by your vehicle year, make & model.
Got a stupid question, when you say “restore original ride quality”, so there are essentially many kinds of Excel-G? Like obviously the factory 4Runner shock is diffeeent than the factory F150 etc. so how can one KYB restore just any factory ride??
Excel-G is the name of our twin-tube shock and strut product line that's focused on being the OE replacement for twin-tube applications. We have many different part numbers in that product line. To your point, one shock would not be the correct choice for vehicles that are as different as your 2 examples. In fact, we often manufacture different parts for various trim levels due to the weight and demands of 1 vehicle application, like an F-150.
Check out www.kyb.com to learn more and see our online catalog.
I have a Sierra 1500 with IFS, daily driver but I do plow in the winter, so I was going to get the monomax all the way around but would this be overkill when I'm not plowing? Would the Gas Adjust be adequate for the winter months? Thanks.
MonoMax and Gas-a-just are both great for trucks that work, but this will be tough to answer on a CZcams comment section. We recommend that you contact our tech support team about how you use your truck, how modified it is, how you want your vehicle to handle when it's plowing and when it's not, along with other variables that can help you make a decision. There's even an option to mix and match our products, depending on what you're trying to achieve. Our tech support team is filled with knowledgeable people that would be happy to assist you and you can email them at techsupport@kyb.com
@@kybamericascorp awesome, thanks for replying!
02 f250 daily plus trailer and bike at 1500's in bike season. So thinking about the gas a just thing. Thinking about a camper later. Will the gas a just work for that once or twice a year.
Absolutely. It's designed for performance on demand.
Please reach out to our tech support team at techsupport@kyb.com if you'd like to understand a bit more about monotubes. Our website, www.kyb.com has further information as well.
Which would you choose for adding shocks to a triple axle 20,000 lb fifth wheel trailer that didn't have any shocks before but needs something to help make the ride smoother?
Please email our tech support team at techsupport@kyb.com
Gas adjust
Is it possible for shocks and struts to get too stiff with age (usually it's the opposite, they get too soft with age)?
I had KYB Excels on my Maxima for a few years and i was very pleased with them. I know they are a little bit firmer/sportier than competition and this is one of the reasons i chose them but now, after a few years, they are hard as a rock. The ride is jarring, i'm bouncing all over the road. I also tried pushing down on all 4 corners of the car and i can't get it to move at all (the car is stock).
Does this mean it's time to replace them and is this considered regular wear and tear or is it covered by your Limited Lifetime Warranty?
Thank You!
Thanks for also reaching out to our tech support team with this question. They will be able to work with you to help figure out the problem and solution. We generally don't see worn shocks and struts getting too stiff, that's for sure!
@@kybamericascorp they already replied, thank you!
@@Mickey_Bauer Idk if you got the problem solved yet, but yes, shocks and struts can get "stuck" to the point where it becomes very hard for them to compress or rebound, which would cause a harsher ride then when they were new. You would be able to tell if they were stuck by taking them out of the car and fully compressing the shock and see how long it takes for the shaft to rebound, if at all. A good quality shock/strut will normally compress fairly easy and rebound relatively quick. If it has lots of resistance, or doesn't compress/rebound at all, it's stuck, and in need of replacement.
@@noahbolt thank you, it hasn't been fixed yet. I just loosened all the suspension bolts, front and rear and retightened everything again with factory torque specks like i always do but this time i jacked up the suspension to simulate it being under load before tightening. No difference.
I'll probably have to get new struts and shocks but i was wondering if this would be covered under warranty or if it's considered regular wear and tear. They do come with Lifetime Warranty.
@@Mickey_Bauer I’d would check with them but I’m almost certain that’s under wear and tear and you may be looking at buying a new set. I think the warranty is just for defective parts.
What is the difference between strut a plus and truck a plus ,preassembled struts from KYB.
The short answer is the Strut-Plus is a direct replacement for what originally came on the vehicle and the Truck-Plus is more: Truck-Plus Performance has more damping and Truck-Plus Leveling adds a leveling kit as part of the assembly.
Getting ready to do a suspension replacement on my 2008 Nissan Pathfinder. Looking at the Excel g quick strut for the front and was debating between the Excel g versus the gas adjust for the rear. Is the gas adjust a stiffer ride compared to the Excel g? I do anticipate the occasional towing (about 3,500 lb trailer) but this vehicle is much more frequently used as a daily driver so ride quality is my priority.
Some vehicles come OE equipped with monotubes, and our Gas-a-just is an OE replacement in those cases. We generally recommend monotubes for vehicles doing some towing, and Gas-a-just is designed to be a performance on demand damper in tougher situations like that.
It looks like you’ve done some research, but we have some resources to assist you with your decision. We’ve got our website with product pages, product videos on here, and our online catalog where you can find what we offer for your specific vehicle: Check out www.kyb.com/catalog. If you have further questions, please reach out to our tech support team by emailing techsupport@kyb.com
@@kybamericascorp yeah. The Excel G shows as the recommended for OE ride quality and the gas-a-just as an upgrade. The Gas-a-just advertises a 25% increase in dampening. Does that mean it should have a smoother ride or stiffer ride versus the Excel G?
@@jon27d It means that it's suitable for everyday driving and capable to perform with the added weight and demands of towing when the situation calls for it.
I do alot of driving on unpaved and rough road, gravel road. Which one should I buy for Dodge Ram 1500
It depends on many factors including how you use it, what your vehicle was originally equipped with, the year and trim level, if you are looking for a shock, a bare strut or a complete assembly, along with what we offer for your specific vehicle. We recommend doing some research on www.KYB.com and then talking to our customer or tech support and/ or your local parts store for more information.
Which shock absorbers is good for Toyota Corolla S 2005?i changed my rear shock absorbers twice in a week but still no having a comfortable especially pothole
If you are in the US, please check our online catalog at www.kyb.com/catalog where you can search by year, make, and model. If you are not in the US, please find the KYB company local to your region.
Also, shocks control the springs, which control the body movement that you feel in the vehicle. A simple shock replacement may need other components added as well to achieve better stability and control. A KYB Strut-Plus complete assembly comes with an OE replacement strut that's been calibrated to work well with other worn suspension components around it, an OE matching spring that is corner specific, and a new OE mount to help restore your Corolla's handling to like new. Starting with a quality shock or strut like KYB would be a good move to handling changes in road conditions, like potholes as you mentioned.
Can you mix the types from front and rear? I have a 1999 Honda CRV, I want the ride comfort for the rear seat passengers and tighten up the steering response for the front so I was thinking about the gas adjust. Is this recommended?
Mixing dampers is an option, but it's not always recommended and depends on a few factors. In your case, I checked our catalog and don't see that we offer Gas-a-just for your vehicle.
If you have follow up questions, our Tech Support team can assist you. Please email techsupport@kyb.com
Which should I choose if I ride my fiat like a go cart in California 😅
You'll have to determine what we offer for your vehicle before you can get to that step by visiting www.kyb.com/catalog.
We're all about handling and control, which allows a driver to feel more confident and drive safer in their vehicle. Seems like you appreciate steering response like we do!
I have a 1995 mustang gt convertible with eibach pro kit springs and bilstein shocks and struts with 130,000 miles on them and it seems the ride is getting firmer-actually,it rides like a lumber truck!!!Which shocks do you recommend?
We'd probably recommend our Excel-G shocks with the Gas-a-just axle damper for your case. Our online catalog at kyb.com/catalog can help you with what we offer for your Mustang if you want to learn more.
Our tech support department can also help you if you have any questions. They can be reached by email at TechSupport@kyb.com
Whats best for long hwy drives somethings that's gonna feel smooth
Our OE replacement parts will bring a vehicle closer to how it was when it was new. If you liked how the vehicle originally rode, then that's probably the choice for you.
Check out our online catalog to see what we have for your vehicle: www.kyb.com/catalog/
@@kybamericascorp I think imma get the strut plus
Hello...KYB Americas Corp. before i buy shock absorber in your store i need some advice for what is the best for my Car Nissan Qashqai J11 1.3 140hp petrol engine 2019 model please reply if you have time thanks.
Hello, we don't have that model vehicle in North America. Look for the KYB company is in your area to see if they can help. Good luck!
Am getting a pair of front Excel G gas struts for my 09 Mazda Tribute a.k.a Ford Escape. Any idea how long these struts last (miles/years) for city/highway driving? I heard certain brands start failing within a year. That would be terrible because I don't think strut replacement should be an yearly thing.
Thanks for choosing KYB, we don’t think it should be a yearly thing either!
All shocks and struts will eventually wear out, but we’re confident these will help keep your vehicle performing as designed for years to come. We think you’ll be very happy with these KYB parts on that Tribute!
Living in the Middle East, What are the best shocks for Lexus es 350 ? Thank you
We'd suggest starting with the KYB Middle East website to see what's available for your vehicle: www.kybme.com/
2007 Toyota Corolla s . Just use for delivering food .. what's the option
We recommend starting here: www.kyb.com/catalog/ and then looking here: www.kyb.com/where-to-buy-kyb-shocks-and-struts/
I have a 2008 Corolla that I’m planing on replacing my front struts. What do you recommend to get a smooth ride that lasts long?
It ultimately depends on your trim level, but we offer OE replacement Excel-G bare struts & Strut-Plus along with the higher damping spec. performance upgrade Excel-G & Strut-Plus from the sportier models. We're OE on many Toyota vehicles and if you liked the way it handled before the shocks were worn, you'll likely be very happy with our aftermarket products.
View our online catalog here: www.kyb.com/catalog/
Wich are the best for audi q5 2012 2.0 T? I want a soft ride, to hace control, and good performace in the highway
Please check our catalog for what we offer for your vehicle at www.kyb.com/catalog
I want to my W202 Mercedes C180 Classic drive as much as more comfortable. What do you advice ?
We'd advise starting with checking our online catalog at www.kyb.com/catalog/ to see if we have coverage for your specific vehicle. I don't know what year your vehicle is, what trim level you have and if we offer products for it. After that's all established, then we can talk about what sort of handling and control you're looking for, which our website, our other CZcams videos, your local parts store, our customer support and tech support teams will be able to help guide you.
@@kybamericascorp I would like to buy Excell-G as my OEM replacement, because I have standard chassis. But here in our country is only available Gas a just, which is too firm for me.
🤔Do you think KYB gas for the front and KYB Excel G for the rear is a good idea? 💡I have a 2001 Nissan Xterra rwd.
That's certainly an option and that is the recommended OEM replacement. Those two are tuned to work together on this application.
My dad recently replaced the front shock Absorbers on a Ford Ranger 2008 . But saying they’re too hard. So which ones are gonna make it more comfortable and softer?
if you are in the US or Canada, please contact our customer support for assistance in finding what's right for that vehicle. Email at kybcs@kyb.com
We don't know what shocks were just installed. KYB parts are made to either bring a vehicle closer to how it rode when it was new, or they are for more demanding situations where a vehicle works more and needs more capability. I'm guessing that he's looking for more of an OE replacement. See what we have for your vehicle with our online catalog: www.kyb.com/catalog/
@@kybamericascorp I appreciate that. Thanks for the answer. We will go ahead and look at the online catalog.
Hey How about shocks for my 2004 Dodge 2500 Hemi with plow
Which KYBs
You'll need to enter in the trim level and drive type in our catalog to see what we offer for your specific vehicle before we can fully decide. www.kyb.com/catalog/
Sounds like monotubes are what you're looking for. Be aware that you can mix and match with MonoMax and Gas-a-just to suite your needs. Our tech support department can help you with that if you reach out to them at: techsupport@kyb.com
I hv fj cruiser 2011.. im looking for comfortable ride...which one i would buy?
Please check our catalog for what we offer for your vehicle, then see our “How To Choose” page to help you decide: www.kyb.com/how-to-choose/
Good night , can the kyb excel g work with lowering springs of 1 -1.5 inch drop ?
Our Excel-G parts are designed to work with OE spec springs. If you have a question about your specific vehicle setup, please reach out to our tech support team by emailing techsupport@kyb.com and they can assist you.
What is the lifespan of most struts shocks for a commuter car no towing off-road anything like this?
The industry went away from a standard number years ago, there were too many variables to account for: Things like road types, vehicle usage, quality of components, climate, etc. all factor into a shock/ strut's wear.
A good shop can give your vehicle a road test and determine how worn shocks & struts are on a vehicle. If your vehicle takes more time and space to stop, has too much body roll or other noticeable signs of worn suspension, it's time to look into a road test to replace shocks & struts.
@@kybamericascorp
Hey there Thank you for your response! I can understand this
Hi tell me where to call , I need soft shocks and struts for Cadillac DTS , again soft ! Thanks !
We'd recommend finding out what products we make for your vehicle by visiting our online catalog at www.kyb.com/catalog. Once you establish what part numbers you're looking for, you can then click the, "Where to Buy" link.
Our Recommended OEM Replacement Excel-G and Strut-Plus products will closely match the original units. We advise getting new springs and mounts, which our Strut-Plus complete assemblies come with, to ensure the ride and handling is consistent.
@@kybamericascorp Thanks !
Best shocks for my 2008 Lexus RX350? I think its the Excel G but I'm not too sure
If you live in the US or Canada, head over to www.kyb.com/catalog to see what we offer for your vehicle. Then see our “How To Choose” page to help you decide at www.kyb.com/how-to-choose/ along with this video for tips on how to think about your shocks and struts.
2012 Chrysler Town and Country. I am thinking of going with 349143 Excel G however during the winter (4 months) I put on 25% heavier tires. Is it worth it to go with the 554379 Gas-A-Just or is that overkill for heavier tires that are only on for 4 months of the year?
The answer, as the video explains, is that it comes down to how you use your vehicle. If you tend to drive that specific vehicle with a full load of passengers and cargo throughout the year, then the Gas-a-just is worth the upgrade. Otherwise, choosing Excel-G is probably the right choice. Adding heavier tires usually warrants going to a monotube, but if they're not even on for half the year, it'll probably be too much damping the rest of the year.
Our customer support and tech support departments can help you if you have further questions: kybcs@kyb.com
@@kybamericascorp Thank you for the response and the analysis. Very helpful.
🤔I'll choose gabriel then...
So which would be best on a ‘74 VW Beetle? Sounds like the Excel G’s? Thx
Please check our catalog for what we offer for your vehicle, then see our “How To Choose” page to help you decide: www.kyb.com/how-to-choose/
The "Best" for your vehicle depends on how you use it, if it's stock or modified, what we offer for a particular vehicle, etc.
If you need further assistance, please reach out to our tech support and they would be happy to assist you, email techsupport@kyb.com
Can mazda rustler rear shocks fit on mazda 2 guy pls help
Thank you for reaching out with your question. We don't have that model in our region of the world.
Please contact the KYB Middle East & Africa division and hopefully they can assist you: kybme.com/contact-us
hello please is gas shocks good for my Nissan rogue 2008 model
www.kyb.com/catalog/ to enter your trim level and see what we offer for your vehicle
For 2003 Honda Accord EX 4 cylinder, do you recommend the Excel-G or the Strut-Plus? How do I know if I can still use the old coil or not?
There are a few factors to consider to answer your question. First few factors, what’s the wear on the vehicle? Is it high mileage, driven hard, does it have a floating ride or is it noticeably sagging with ride height issues? Is the paint on the spring cracking, is there rust? Those could indicate spring wear and we would recommend replacement.
Second, who would be installing the new parts and where? If it’s a professional mechanic that has access to a spring compressor and the tools often used with a replacement, then either can work. If it’s not a professional doing the replacement, the Strut-Plus is already assembled with the appropriate spring and mount ready to go out of the box. Spring compression can be very dangerous and is not recommended for someone who doesn’t have access to the proper tools and safety equipment. Plus, replacing all those components at once makes a large difference in the control and handling of the vehicle.
TL,DR: Strut-Plus is a quick and correct replacement for the strut, spring and mount that has been fit checked and road tested by KYB. It’s recommended for worn components and is a much simpler install than a new bare strut that would be reusing the old spring. We recommend replacing the strut mounts with new struts anyways as the rubber in the worn mount is usually pretty beat up and can lead to rattling noises and potential fitment issues.
@@kybamericascorp Thank you for your prompt reply. My car has 154,000 miles on it and it shakes when going over uneven road and potholes. Struts have never been replaced. It also does feel a bit floaty in the frontend at highway speeds. I just inspected the coil springs and there was no sign of rust or damage and the paint is intact. The install will be done by a professional mechanic. I don't mind spending a little more and buying Strut-Plus; however, I am just worried that the ride may become stiff and not as enjoyable.
@@bens2603 Our Tech Support team is in a better position to help you from here. Good luck with your Accord!
Good question I have a Camry I'm curious as to excel g myself
What do you have for a 1988 Nissan Maxima front and rear
As always, we recommend checking kyb.com/catalog to see what we offer for your vehicle and trim level
Choose bilstein.. no monomax for my ride....1ton express
I heard excel G are firmer than original to make up for the older springs. True?
That's partially true. The goal of the Excel-G is to help restore the control and handling to what the vehicle manufacturer intended. To achieve that, we often calibrate the damping to compensate for age, suspension component wear and coil spring fatigue.
@@kybamericascorp I got a 04 sequioa that has like 150k on the odometer. I want it to ride smooth but yet really dont want the just plain fluid excell G. Really thinking the Gas-A-Just would be better for my Sequioa SR5 but cannot find any place that sells them for the 04 sequioa. Cant even find a Mono max for the it. What do you recommend that I buy between these three that You offer here? If you think I would still be better off with the EXCEL G then tell me to get them but I just thought the Gas-a-just would handle better. Your opinion will be what I will go with but if you do recommend the Gas- A- Just then let me know where I can buy them at. I need some now as my front drivers side is locked in the up position. Rides very rough. Thanks.
@@craftsman1598 I like your thought process in wanting more for your vehicle, but have you checked if we even offer Gas-a-just or MonoMax for an '04 Sequoia? The answer is on our electronic catalog and the Excel-G parts we have for it are created to help restore how the van originally drove when new. We're OEM on 1 out of 5 vehicles worldwide and we use that knowledge as a starting point for building our aftermarket parts. The KYB aftermarket parts are built to compensate for worn components. Our goal is to restore a high mileage vehicle like yours to its original designed performance.
Check here to see what we offer for your specific vehicle: www.kyb.com/catalog/
What about the "premium" option?
KYB only builds parts that help restore designed control or provide additional control capabilities. We don't have levels of quality, like "premium," we just make correct parts.
What's the best option for 08 crown Victoria police interceptor??
Please check our catalog for what we offer for your vehicle at www.kyb.com/catalog
Ok. Thank you
Now make one of how to install them, thanks😂😎
No lol there easy and simple to install
Can the sleeve from the kyb gas a just be removed and the shock be used without that?
Sleeve in the eye*
@@czariobourne822 The sleeve is bonded to the eyelet bushing and is not designed to be removable. This is because the bonded sleeve ensures proper positioning of the shock when installed on the vehicle.
Can the entire eyelet bushing be removed and replaced with a rubber bushing that fits my application?
@@czariobourne822 Please get in touch with our tech support and they would be happy to assist you, email techsupport@kyb.com
Gabriel. Get Gabriel shocks. Ok? Ok.
i have a viano mercedes
van car what you suggest me front and rear
We're not aware of that vehicle in North America. Please check what KYB has available in your area.
What’s a good rear shocks for a 2004 Escalade esv truck
This video offers some great tips and we have more helpful information on our website, including a catalog that can filter by vehicle: www.kyb.com/catalog