Part 82 - It Is Finished!! - Born49ain -- 1949 Ford/BMW chassis swap
Vložit
- čas přidán 30. 12. 2021
- What's up everybody!
Well, here we are, the end of an era. Our 49 Fiord body swapped BMW is finally done (except some tuning and a headliner LOL - those videos are to follow shortly).
Check out this video to see the finished product with it's 20x14 Hostile Wheels, 345/20 Toyo Proxes, Garret Motion turbo mounted on a Doc Race manifold and so much more.....
Thank you for your faithful support of this build for the last two years.
We just crossed over a modest 5000 SUBS and we are grateful for each and everyone of you!
IF YOU GUYS ARE NOT SUBCRIBED PLEASE TAKE THE TIME TO DO SO, AND TURN ON YOUR NOTIFICATION BELL.
LASTLY, PLEASE SHARE THESE VIDEOS WITH ALL YOUR FRIENDS!!
This episode is brought to you by:
www.maniacsgarage.com/merch
Make sure you guys go and pick up some merch on or website!
About Maniacs Garage and its creator:
My name is John. Over the past few decades I have built some pretty crazy rides and this one may be the craziest! After spending the last 15 years working on my Real Estate business, raising a family and help plant a start up church, I am ready to embark, along with my son and a group of friends, on a new project.
However, this is not just any old project, we are going to attempt the first ever 1949 Ford Shoebox chassis swap to a 2008 BMW 335i.
Keep in mind that we don't do this for a living and the budget is very limited.
Will we make the deadline for SEMA 2021? What kind of challenges will we run into along the way?
Come follow along and make sure to SUBSCRIBE and share it with your friends!
Help support the builds by buying some Maniacs merch at:
www.maniacsgarage.com
Also follow us on:
/ maniacsgarage
/ maniacsgaragebuilds
/ maniacsgarage
#1949Ford #1949FordShoebox #BMWE92 #BMW335i #chassisswap bodyswap #semaproject #manicasgarage #born49ain #bornagain49 - Auta a dopravní prostředky
Didn't know Bruce Willis did this stuff in his spare time 👍🏻
He is a jack of all trades...
I thought it was Vin Diesel
It’s a Beamer so when it dies it’ll “DIE HARD”
🤣
Don't EVER underestimate Bruce Willis! He was/is John McLain FFS, he has been known to be build his own cars cos no car he could buy would ever be bad ass enough for him, nutra bullet build him a one off model made of diamond glass and carbon blades so he can blend a bottle of black label bourbon and a huge box of 4 inch nails (that is his equivalent of a breakfast spiralina and kale smoothie)
With his sunglasses on you’d be hard pressed to tell the difference.
John... McClain? LOL, you're a doppelganger for Bruce Willis. Yippee-ki-yay Maniacs! Fun build.
🤣👊
Great build. I personally would love to have seen it cleaned up and painted.
Cool ride Bruce Willis
😎👊
Happy you guys crossed the finish line. I picked the channel and project about a year into the build, and I haven't missed one since. I've said it before, it was inspirational and a real motivating force in getting back on my '33 Vicky. I was probably a week or so from sending it on. Thanks guys, great job!
Love to hear this has inspired you! Don't leave us as we have a lot more coming, both with this car and possible something new. In fact, send me an email at contact@maniacsgarage.com with the size of t-shirt you wear. I'd like to get you one as a thank you for being one of our biggest (longest) fans. You have been awesome in commenting on our videos on a regular basis. Thank you! and Happy New Year!
Great job, now off to the body shop.
WOW that looks wicked
Thanks!!
Dang, I didn't know Bruce Willis built cars! Awesome!
😎👊
Possibly the coolest thing I have ever seen. I was thinking about grafting a late 60’s Valiant body (square shaped) on to a 2009 FG XR6 Falcon Turbo. From the land down under.
Thanks!! Best of luck on your project!!
Another mad max on the road...
Nice job girl & boys... keep up the good work..
Awesome Build!!
Thank you!! We really appreciate it! Happy New Year!
One of the best builds I’ve ever seen
Ahh, that does make us feel good! Thank you!! Stay tuned for more...
That sun visor was a work of art in its own right, absolutely beautiful.
'Ullo John, got a new motor? Or shall I say, "Ullo John, go' a new mo-uh?".....sorry, look up Alexie Sayle, from the UK.
Nice work.
This car is almost impossibly cool.
Thank you so much!!
Congrats on this two year transformation and for sharing the videos of this build.
Thanks Craig! Do stay tuned as we have some more up our sleeve when it comes to this project,... and possibly a new one!!
Shout out to car tok for letting me find you wonderful person and this beast of a machine
Nice!! Welcome to the channel. You can also follow this build on Insta @maniacsgaragebuilds
Hi there I have to say one of the best lokkin car build I seen well done I really like it
Thank you so much! We really appreciate it! Happy New Year!
Bruce Willis is you? Haha good video very nice car bro
Nice design
As rough as it can be 😎
I think this guy is bruce whilis 😂🔥😂🙏😂🙏
Looks great I like the fact that it’s not painted🥳
Thank you Greg!
Good Job Bruce Willis!
Hahaha! Thanks!!! and thanks for following!
I thought it was Bruce Wills!!! 😲😁
Fantastic job. Restomods are my favorite types of Cars.
Thanks for your comment!! We love them too because the posibilities are endless.
@@ManiacsGarage l would pick them over exotic super Cars anyday.
I can't help to think that you look like Bruce Willis when he was a bit younger.Great job on the car and it looks very heavy.
Hahaha! Thanks on Bruce comment. You're not gonna belive it but the car weights almost exactly what the original BMW 335 weight.
@@ManiacsGarage That's amazing considering that those old cars weigh a ton because of its steel construction.
New to the channel and looking forward to watching all of your past videos. Glad to come across you on Scotty D TV.
So cool! We loved the video Scotty D put out on our car! Welcome to out channel. Stay tuned for some shenanigans with our 49 and some good coverage of other ratty builds.
I love the wide stance. Underrated build the thing looks bonkers
mad max is proud of this guy
That looks absolutely amazing!
🙏 thanks!!
I sure like the way it looks came out great.
Thank you!!
@@ManiacsGarage You're welcome! Thanks for sharing ☺️
Hi John, I, too, picked up the build about a year ago, and have really enjoyed watching. Very entertaining! Happy New Year to all of you!
Hello Tom, thank you for watching our build and good luck with yours! DM us some pics @maniacsgaragebuilds if you want.
Great! 😄
And You got Bruce Willies for presentation!
I like that you can see the welds!
Love that amazing Projekt. well done
Thank you!! Check out the rest of the videos on it. Looks like we're going back to SEMA with it this year.
Wow.. .love it!!
Cool! Thank you!! We have over 80 videos on this build.
Great job ! ! ! I like it. Looks Great ! ! !
Thanks!
Those who created this beautiful work of art wouldn't want me on their Y team, much less the A team. But that aside, what a beaut creation your team pulled off even in the eyes of this putt-putt car driver.
Sure thing Bruce Willis
This is top shelf. Sounds 😌
Thank you!
Very cool build guys.
I didn't know Bruce Willis was a car guy
Hahaha
muy bien hecho Bruce
man with this shades you look like Bruce Willis
Bodyswaps are such an old idea. That said, this has really got all my attention. The only thing I don't like is that shade wrapped centre console. Every single other thing is next level. What an amazing idea you have turned into reality. It's team protest like this that make dreams start for the next generation of kids.
Thanks for your thougts and encouragememnt! We can only hope it inspires the next generation!!
This car is wild!
The "shortening" is called sectioning, that also refers to widing if you would of added a few inches in the middle. Which could have looked alot better than having the tires poking out the sides
Yeah I hear you but we originally set out to have the wheels sticking out. Especially since the BMW donor car under it was the same width as the 49 Ford. Pretty crazy that it fit as good as it did. With that said, we may rework the fenders at some point. Thanks for watching!
@@ManiacsGarage sectioning it would add your own body work while showing off a period correct kind of modification rather than it look like you just tacked something on.
Even if ya went with wide fenders you could have cut the body n pulled them out n add some triangles to fill the gaps, it could have fit better with the style of that body work.
Did not know Bruce Willis left the film acting industry to start building cars. Good Job What a look alike
😎👍
Awesomeness brother. Love what you guys are doing. Just subscribed. Thanx for sharing. GBU
Right one!! Thanks for the SUB! We are taking it to the dyno next week. Stay tuned...
Love it that is super cool 😎 👍
Bruce will, in ten fast ten furious, (prelude story "dom father")🤣🤣
That's pretty funny!! 👊
I love this. I had a similar idea to put a 240z body on an S600 chassis. Sadly, I did not do that. ;)
Hello Mr. Willis 😅
Hahaha, I know! Thanks for watching!
Looks so much better than the BMW
Feels like im watching "Gone in 60 seconds" movie.. lol
Hahaha, thanks!!
From brazil 🇧🇷🇧🇷🇧🇷👍🏻✌🏻
Thanks for following from Brazil!!
"Con el sabor no se juega. I speak en serio" Nice job 👍
👍
How yeah Bruce wilis
LOL. Thanks
Cui honorem, honorem
Hope this is noticed by BMW designers.
Hahaha, right! 👊
Builds are never done. Stop it 🤣. Love this tho
Yup! You're onto us. It is not done. But it is done enough to call it,... for now. Keep on then lookout for tuning, air ride and possible some different fender set up. And of course for a possible next project. Thanks for following!!
Autorized double of Bruce Willis Amazing Job
LOL
I’ve said it many times my all time favourite car build, congrats on finishing it. But what’s next to come?????
Thanks!! and that's a good question. We're kicking some things around...... Stay tuned!!!
Next is a '53 Hudson Hornet on a recent model Bentley Flying spur chassis.....180 mph in a Hudson!
How did the registration and title work out in Arizona? I'm just thought about doing a body swap just don't know what happens with adot
Looks ruff (a compliment). What's the HP output?
i'd buy it
It looks like a XL Volkswagen karmann Ghia
Восторг. эта машина выглядит так, как будь то за рулём мужик , а Pagani ,Lamborghini,Porsche,Bugatti как будь то за рулём подросток.
damn bruce willis is finally doing something great!
COST INCLUDING LABOUR? Lots of us would like to know 🙏🏼
When he said i wanted to build something that breaks and paused
And im thinking weeeeeelll it is a BMW under all that soooooo🤷♂️
Jokes aside
Man that is awesome
Thanks!! We're getting close to getting to tuning it and we'll be breaking some wheels loose!!
Love it, awsome job. is it titled as a 49 ford? is it even able to be registered for street? just wondering what DMV issues you run into with these swaps. THX
No problems at all, it is titled as a 49 Ford.
Si lo dice bruce lo creo.
Bruce Willis 👍
Uffff me gustó la transformación del carro para mí excelente quisiera verlo total mente de negro con brillo y como. Pero está perfecto 100 %
Too bad you left it like it is. Some matt black wrap would be cool.
Bruce Willis on a car channel !
I want it. How much for another. But nice furnished interior and paint
Thank you!!
👍🏻
Thanks!
Do the indicators work?
Funny you ask. I was just working on it last week dialing in some reming items. We originally wired the headlight, tail and brake butnow we have full use od turn signals, hazards, we even have back up lights!!
Это бомба !
Beautiful build! I would love one. How can i contact you about building one of these beauties?
Well, we are just a hobby shop. But you could contact Jay at Jay Shackleford Engineering.
We just did a video interview with him.
But please keep following us... Maybe some day...
OMG the welds on the cage are looking bad, please consider to fix them
How dis you get Bruce Willis to narrate?
Hahaha. I'm a look-a-like
Can you buy this car? If so when will it be for sale? and what’s the estimated price?
Not at this time... Thanks for your interest!
The exterior takes quite a bit away from it. The quality and the workmanship really show in the interior. Very simple, somewhat raw and elegant at the same time.
Is the car really finished.? Some of the weldings looks sloppy.
What track does it play @1:40?
That was made in-house. I don't think it's uploaded to Spotify yet but it should be in the newr future. Here are some others made or remixed by us as well: open.spotify.com/artist/4SgDkYyGkP6pADdEzA43mC?si=KhE1-4nxRY6Sqoy6Mnhvpw Thanks for following our build!!
are there enough of these around to be ruined like this? serious question
Does it have to be registered as a Ford or BMW?
We had a clean title and the VIN numbers transferred over on the firewall of the 49 so we registered it as a 49 Ford. But I guess we could have registered it as a BMW too (that VIN transferred over on the shock tower as well).
Are you Bruce Willis long lost twin?
sound of the car ?
It's in some of the videos. 6 cylinder inline 3.0 L BMW with single top mount Garrett Motion turbo and a 10 inch exhaust pipe.
You see all you sport figures, rappers, rock stars, movie stars etc…get something like this instead of a Lamborghini, Ferrari, Bentley blah blah blah cookie cutter cars. This is not only awesome but unique.
Thank you!!
Bruce Willis?
Are u the twin Bruce Willis
Hahaha, nope. But it's been fun.
Are you bruce willis
Change the wheel to period correct design
so any track days?
Yeah, we'd like to get it out to have some fun. In fact we may be taking it back to the SEMA show this year and run it in the Optima Street Car Challange.
@@ManiacsGarage post a video about it
@@ManiacsGarage also what about the diesel one in hoonigan? you taking that too?
That one is not ours. I've talked to the guy who built it. It's a cool build.
Howie Mandal?????