G'day Jeff, The vids are always cool , you know that . But the CAT repairs are just a treat . I'm pleased to hear you sounding much better. Thanks for continuing to entertain the faithful. Respect...!
When I work on projects that take a while and sometimes not fun at all. I just think of all the fun I'm going to have later when it's done. And on the upside there's no reason to ever hook a laptop computer to it. Just like a 4430 JD she will do a days work and never have to worry about it. Thanks Jeff for taking us along
👌🏻👌🏻 Jeff this was a VERY AWESOMELY ENJOYABLE morning for me to sit and watch you at task!!! THAT MACHINE will outlast even the boys IF they manage to wave that GREASE GUN at the OLD GIRL!!!!! THANKS FOR TAKING US ALONG ON YOUR JOURNEY!!!😍😍😍😍😍🙏🏻
Not telling you what to do/just save on shop towels. When rebuilt undercarriage on a bombardier. Used newspaper to clean the dirty grease out. Nice job 👍
I bought a JD440 bulldolozer with a GMC2-53 diesel and aa broken etrack fraame. I thuoght rebuilding that track frame was SAVAGE AMUSEMENT until I watch you work on theKILL DOZER. MORE power to you, Jeff.
Jeff save you some $$$$$ weld up those retainer plates 3:30 with hard facing and grind or flap them.16:30 Dr. Jeff hard at work on the operating table. At 29:30 the hole in the collar must be opposite of the zerk to expel all the air in the grease groove plus old grease turns rock hard in the groove if it’s Not flushed out with new. Causing it to be a solid binder when the collar needs to be removed in the future. Like concrete.
I'm enjoying watching you do what I did 25 years ago. I haven't stopped, just downsized to antique tractors 😂. Finding the right parts is still a pain.
Your a part of the rare breed club , those of us that manage to do a two person job without help . Don't beat yourself up paying jobs take priority Jeff will win as always
Great video Jeff always enjoy watching you work on this track frame. One done replace back on K Dozer and one to go. Thanks for sharing stay safe Jeff have fun at the Ball game.
Hey Jeff, you should check out the “Portacool” outdoor evaporative air conditioners to beat the heat wrenching outdoors. I have one and it works awesome. Take care.
Well now Mr. Anderson, that bearing/bushing went in “slicker than a pan o’ guts”…, Jeff wins, Jeff wins, Jeff wins…! Woo Whoo..! Great video, Thank you sir.
Jeff wins. I think you've been watching Warren's channel. He may not work on the big cats, but he gets a lot done by himself. Awesome video. I look forward to the she runs again. ❤
Great video, Jeff, you have been very busy, looking forward to completing the rebuild, stay safe and have a wonderful day, cheers, Alice and Leo, Queensland, Australia.
Hey Jeff 🙂 Your persistence is paying off. Are you going for the patina look or scuff’n’spray a couple of gallons of urethane yellow? 😆 Great work, sir.
Seeing you doing your part to lower the carbon footprint. By helping to eliminate mining, smelting, etc. With the natural special blocking you use. But what would the 'tree huggers' really think? 🤔
It appears that You are nearing the finish of this first track frame Jeff. I believe that the second one will be a easier task now that the pitfalls are fresh learned. Good to know that You are feeling better. Best Wishes to everyone at Anderson Construction. #JeffWins
Jay, Check out this chamfering Cone at Regis Manufacturing "ASM-12" is the mandrel and "AS-10" is the abrasive sleeve that goes on the mandrel. Very easy to use, fits on a small drill. When I worked in a speed shop long ago we used these to chamfer engine cylinders after reboring. Hold at the desired angle and grind away, cuts fast on a high speed air drill. Definitely a handy tool for a guy like you to have.
In the past I have run Pneumatic plastic lines and push fittings, as remote grease lines for hard to reach grease nipples, you just have to think a bit of how you route the lines, and remember to charge the lines with grease when you install them.
Good morning .Is there a dealer capable of rebuilding this equipment? Just curious if there are any technicians that could do this in today's labor market
what the heck are you doing it like that for adjustable wrench throw it away and as i say that you have done it my tool box will never have one of those in it cheers to you love yr vids take care
Glad your feeling better. That is a Ton of work for one person, but I know you've been there Before, and will prevail. Will you pull a string from the sprocket to the front idler to center the top rollers? That's what I do, on smaller crawlers. Jeff Wins FYI I watched this episode wearing my JPay Dirt Hat! TGP
Go boy go ! Dont think there are any winners on track gear . Just glad to go home and get cleaned up and a nice sleep .. everything is heavy hot . Even the grinder eants to kill you! Old dog for a hard road !!
I was ready to scream at the monitor and tell you to get an eight point socket and a ratchet. Before I could work up a full head of steam you showed me you did have one in your tool box, so all is fine on my end today.
What would you guesstimate the cost at cat would be for that job in its entirety? I’m betting it would sit most guys down in their chair and say I’m done! Going to be a Walmart tire changer.
It's funny. You can be working on a multi-million dollar job and what tools do the hands have in their hands? Crescent wrenches. Not a combination wrench, socket or cordless impact to be found. So we all laugh about going home to get better tools.
The hardest working man on the Tubes and never breaks a sweat! 😓
Always have time for grandkids ballgames!👍
G'day Jeff,
The vids are always cool , you know that .
But the CAT repairs are just a treat .
I'm pleased to hear you sounding much better.
Thanks for continuing to entertain the faithful.
Respect...!
All this is way beyond my need and abilities but I do enjoy being along for the ride. Thanks!!
Jeff wins, because you're the hardest working man on YT - as you said: 'the wins don't come easy'. Can't wait to see the old girl pushing dirt again!
Love the way you stick with it in the hot weather and gravel to get it done! Love your videos never miss a one!!
Hardest workin man inshow business. Great work.
Solid love/hate relationship .... gotta love it
Good job mate loved watching your work keep up the good work
You at least need an umbrella to shade you while you work. One of those freestanding canopies would be cool too.
When I work on projects that take a while and sometimes not fun at all. I just think of all the fun I'm going to have later when it's done. And on the upside there's no reason to ever hook a laptop computer to it. Just like a 4430 JD she will do a days work and never have to worry about it. Thanks Jeff for taking us along
👌🏻👌🏻 Jeff this was a VERY AWESOMELY ENJOYABLE morning for me to sit and watch you at task!!! THAT MACHINE will outlast even the boys IF they manage to wave that GREASE GUN at the OLD GIRL!!!!!
THANKS FOR TAKING US ALONG ON YOUR JOURNEY!!!😍😍😍😍😍🙏🏻
Great video, can't wait for the next one.
Not telling you what to do/just save on shop towels.
When rebuilt undercarriage on a bombardier. Used newspaper to clean the dirty grease out.
Nice job 👍
I bought a JD440 bulldolozer with a GMC2-53 diesel and aa broken etrack fraame. I thuoght rebuilding that track frame was SAVAGE AMUSEMENT until I watch you work on theKILL DOZER. MORE power to you, Jeff.
Jeff save you some $$$$$ weld up those retainer plates 3:30 with hard facing and grind or flap them.16:30 Dr. Jeff hard at work on the operating table. At 29:30 the hole in the collar must be opposite of the zerk to expel all the air in the grease groove plus old grease turns rock hard in the groove if it’s Not flushed out with new. Causing it to be a solid binder when the collar needs to be removed in the future. Like concrete.
Blimey Charlie...now here's a pleasant surprise for a Wednesday lunchtime Jeff...
I'm enjoying watching you do what I did 25 years ago. I haven't stopped, just downsized to antique tractors 😂. Finding the right parts is still a pain.
Your a part of the rare breed club , those of us that manage to do a two person job without help .
Don't beat yourself up paying jobs take priority Jeff will win as always
As always bro this video was great viewing, ya making good progress too. Safe travels. Ken.
Great video Jeff always enjoy watching you work on this track frame. One done replace back on K Dozer and one to go. Thanks for sharing stay safe Jeff have fun at the Ball game.
Hey Jeff, you should check out the “Portacool” outdoor evaporative air conditioners to beat the heat wrenching outdoors. I have one and it works awesome. Take care.
Definitely a man's man! You Definitely could use a helper with all those big awkward parts.
Thanks for the show Jeff 🍻
Well now Mr. Anderson, that bearing/bushing went in “slicker than a pan o’ guts”…, Jeff wins, Jeff wins, Jeff wins…! Woo Whoo..!
Great video,
Thank you sir.
Jeff wins. I think you've been watching Warren's channel. He may not work on the big cats, but he gets a lot done by himself. Awesome video. I look forward to the she runs again. ❤
Great video, Jeff, you have been very busy, looking forward to completing the rebuild, stay safe and have a wonderful day, cheers, Alice and Leo, Queensland, Australia.
Hey Jeff 🙂 Your persistence is paying off. Are you going for the patina look or scuff’n’spray a couple of gallons of urethane yellow? 😆 Great work, sir.
Thank you, Jeff. Glad your feeling better. Things seemed to work better when we feel good 👍
That idler picker upper great tool! Safety first!
looking good.🤩👍👍
Thx Jeff,you make it look easy😊
Jeff, you should make a video at the end on how much a repair job like this costed you vs paying a shop to do it. I’d be curious to know.
Seeing you doing your part to lower the carbon footprint. By helping to eliminate mining, smelting, etc. With the natural special blocking you use.
But what would the 'tree huggers' really think? 🤔
I think Geoff has won big time,great major job,great video.
It appears that You are nearing the finish of this first track frame Jeff.
I believe that the second one will be a easier task now that the pitfalls are fresh learned.
Good to know that You are feeling better. Best Wishes to everyone at Anderson Construction.
#JeffWins
Jay, Check out this chamfering Cone at Regis Manufacturing "ASM-12" is the mandrel and "AS-10" is the abrasive sleeve that goes on the mandrel. Very easy to use, fits on a small drill. When I worked in a speed shop long ago we used these to chamfer engine cylinders after reboring. Hold at the desired angle and grind away, cuts fast on a high speed air drill. Definitely a handy tool for a guy like you to have.
Oops, make that Jeff. Sorry about that!
Jeff tour next batch of shirts u need a double deep for that phone. Good job man!
Double deep pocket
centrifuge the oil to remove water.
In the past I have run Pneumatic plastic lines and push fittings, as remote grease lines for hard to reach grease nipples, you just have to think a bit of how you route the lines, and remember to charge the lines with grease when you install them.
Boy a fresh coat of paint would sure make the ole girl BE-A-YOU-TEA-FULL!!!!
Glad ur better man, enjoy the game.
You, the man, Jeff, the one man fat machine👍
Seals are to keep crap out not grease in so lip out. If you put lip in and push grease past the seal the seal is roo ted.
Good morning .Is there a dealer capable of rebuilding this equipment? Just curious if there are any technicians that could do this in today's labor market
Copper grease, every CAT dozer assembly guys friend. Hope you had fun at the baseball game.
Someone is going to regret they never stayed around to help when you're gone. Holiday will be well deserved.
thanks for sharing.
what the heck are you doing it like that for adjustable wrench throw it away and as i say that you have done it my tool box will never have one of those in it cheers to you love yr vids take care
Glad your feeling better. That is a Ton of work for one person, but I know you've been there
Before, and will prevail.
Will you pull a string from the sprocket to the front idler to center the top rollers?
That's what I do, on smaller crawlers.
Jeff Wins
FYI
I watched this episode wearing my JPay Dirt Hat!
TGP
Thats the way to do it.👍
The link i sent you is fir another galion crane could be a good parts machine,its in Facebook marketplace close to me in Kentucky
in the heat a friend starts wearing dress pants he gets at interfaiths they dont stick to your legs
Seals "backwards" makes sense.
Hey Jeff, couldn´t you fit a remote grease line to that track frame bearing and armor the line running it through a pipe ?
Jeff wins Onya mate !!!
Go boy go ! Dont think there are any winners on track gear . Just glad to go home and get cleaned up and a nice sleep .. everything is heavy hot . Even the grinder eants to kill you! Old dog for a hard road !!
I was ready to scream at the monitor and tell you to get an eight point socket and a ratchet. Before I could work up a full head of steam you showed me you did have one in your tool box, so all is fine on my end today.
What kind of software do you use to edit videos?
Can you just build those retainers up with weld and grind them flat again?
👍
☕
Y'all need to hire a second set of hands Jeffrons....rebuilds are not a two hands job.
curious why the Kill isn’t getting some new paint while its apart
Jeff, why don't you use a square drive socket on the tap? Are you killing time, or are you just so bored?!
Hi Jeff why do you use a battery powered 1 Inch impact gun and not a air impact gun I don't understand
Run a line out so you don't have crawl under to grease
How about adding remote grease hoses on diagonal brace pins
First
Tap Magis works much better than WD40
What would you guesstimate the cost at cat would be for that job in its entirety? I’m betting it would sit most guys down in their chair and say I’m done! Going to be a Walmart tire changer.
It's funny. You can be working on a multi-million dollar job and what tools do the hands have in their hands? Crescent wrenches. Not a combination wrench, socket or cordless impact to be found. So we all laugh about going home to get better tools.
USA NJ
czcams.com/video/wnMbivtN7Ig/video.html
Trump lovers have no place on my CZcams.
Did you come down with faucci flu?