This was a nicely edited video. I've never seen anyone install Mlock like that. I usually just twist the locking piece by hand then insert and tighten. It makes me want to upgrade my M4.
Bro, i always wanted a Benelli m4, but couldn't afford and yes i have heardof the Turkish clone but was kind of avoiding to buy one of those but after watching this im definitely going to buy one now and im subscribing to your channel, thanks man now my dream will come true
Nice build 9/10. The Eotech is my only major criticism. They are bit heavy for me for the application, and I prefer less interference in my field-of-view when tracking moving targets. Many would disagree; but they haven't ran drills in the 100 degree sun beating down. Eotechs are not light, and ounces turn to pounds in the real world. Those quick targets turn into a challenge over a few hours. I opted for a different rear stock and a light-weight holosun for optics. I also immediately coated mine a lighter tan. Black is not friendly in the sun. I have a slightly different flashlight setup that doesn't have so much excess cable, but that's easily alleviated. Snagging is never fun. Otherwise, 9/10. I would move the extra shell carrier just a bit forward for my long hands, but otherwise; mine is set up very similarly. I did run a fine steel-wool cylinder brush through the magazine tube to polish the feeding though. Mine was a little rough from the factory, and the friction inside the tube was noticeably impeding some shells. It was not enough to cause malfunctions, but it was enough to notice if one has any time behind the system. After just a bit love TLC though, it felt much better. I also deburred many sharp edges with slight beveling to save my hands and gloves. My ejection port was especially sharp in a few small areas and just needed a few passes with my stones. I highly recommend everyone to spend just a little time on their "Turknellis". Some of the early imports need a lot more love. The newer ones seem to have much better machining and finish quality. That being said, a little preemptive attention can go a long way!
I like eotech since its more durable but yes battery life and weight is its not so great features, i thing the circle and dot makes my target acquisition so much better but i know what you mean exactly. Done a few 12 mile rucks in my life and the difference between 45lbs and 50lbs is huge haha
@@joshmeadows4147 Sounds like someone doesn't know there Optic history, has never ran any drills, competed or owns multiple rigs. Here's some advice from someone that knows better. Eotech settled a CLASS ACTION LAWSUIT for known defects. I know, because I have a 512 that my friend sold me after getting it fixed. Furthermore, Eotechs are about twice as heavy as some of my other favorite optics, and the battery life isn't even close. Eotechs also take up considerable real-estate. Many that run 3-gun prefer as little weight on their shotguns with as much field of view. I implore you to go to a match and see how many are running Eotech on ANYTHING, let alone their 400 dollar Turknelli. SPOILERS: Not many if any at all...
What a coincidence... I also upgraded my MAC 1014 a few days ago. Mines has the marine finish and all I did was upgrade to the MI rail, MI charge handle, vert grip, and the RX arms extension tube for matching finish. At this point most of my "airsoft" things are slapped with MI parts.
As a non gun owner from Australia i would have loved to see a little description of what the part is that is coming off the gun and what the benefits are of the upgraded part going back on.
Sick freaking gun. I would’ve put the hand stop and light control further forward though. You won’t be able to quick load 2-4 shells at a time with it so close to the loading gate.
I didnt even shoot it not upgraded, but is should run the exact same regardless since i didnt change anything about the operating system. It runs great no jams im not going to clean it either so i can do a thousand round review / setup video
Hey Great content Bro. Earned another sub Thanks for sharing. Could you do a parts breakdown like you did for your spear video. I am really digging this set up and would like to get something similar or see what the cost range is for something like this. Thanks and have a good one!
Nice video. I like how you titled it, kinda knowing it’s just overdone. Looks like a tactical build once you put the flashlight on. I don’t get the matchsaver round on tactical shotguns I switched to shotgun cards on the side. Every long gun needs a sling so you can free up both hands. Only question I have is how useful an eotech and flashlight at night are?
*shotgun bros* just one more shell bro trust me i just need one more no its totally normal to carry a shell in the chassis outside the tube its another shell bro cmon one more shell
Idk much about guns. But since this is a benelli clone, you can just buy the modifications for the benelli and put it on the turknelli? Or need specific parts for that?
@vietnamtactical Dang it the shop I bought it from said it was a cheaper version of the benelli lol I guess not. Your gun came out sick though. I'll have to look into parts for mine
Surprisingly it runs extremely well, ive had bad experiences with turkey made guns but this one feels and runs as well as a benelli m4, ofc i only have 800 rounds thru it no cleaning but as of now thats a lot better than the GF1 shotgun i have
@@vietnamtactical fact. Ordered one yesterday. Also picked up a polymer heat shield for the barrel from Trinity Supply. As you said, the barrel is the enemy usually
Heard panzer actually has some issues, i only got this because I havent seen a single bad review on it and unlike panzer big companies like midwest industries and agency praises it as well
@@vietnamtacticalya I know is a joke. I don’t understand why people buy budget imports then waste money on attachments. A $400 gun with $1000 worth of attachments is just dumb
@lukeestep7775 it was kind of a joke setup but with a good reasoning behind it. I dont like shotguns, so buy $2000 shotgun + $1000 attachments or buy a $370 shotty with the attachments? This is really its test run to decide if i want a genuine M4 or not
Dont like shotguns. Touching the water to see if i would even like to shoot the thing more than 3 times a month and if i do ill buy the real one and replace the parts.
Que pena que aqui no Brasil a gente não pode comprar nem a arma e nem todos esses acessórios, primeiro porque a lei não permite o cidadão de bem ter sua arma para defesa e, segundo que é tudo muito caro, a arma em si já é uma fortuna e cada acessório desses também custam uma fortuna!
Build list??
Surefire X640DF + Button and Plug Adapter
Rangenord Shotgun Shell Holder + Mlok Screws
Left Side Armory Hand Stop
Eotech EXPS3-0
Midwest Industries Benelli M4 Handguard (Long)
Midwest Industries Benelli M4 Charging Handle
Briley EZ Bolt Release Handle
GG&G Benelli M4 Mag Tube Follower
Choate Tool + 2 Mag Extension
I think thats it
จิรพงษ์ งานนฤมลกิจ❤
12345
@@vietnamtactical Look nice, how much it cost? I feel like it cost more than the gun itself,which is around 318 online.
Yeah it did but that was the point did it for jokes and to see if a clone can go face to face with the real deal
"Custom bolt carrier release and charging handle. Textured grips, should your hands get... Wet. An itallian classic!"
Oh yeah👌
Good afternoon Mr. Wick
@@joecola6415 It's been a long time.
This needs more likes. A tip of the cap to you.
@@Theerhino36 I appreciate you :)
I like how you semi violently throw every part onto the table to add excitement
when he pulled out that EOTECH box, my wallet done screaming "BRUHH"
that Surefire almost cost as much as that shotgun .
The scope is worth more than the gun😭
Snap ring pliers would be a good addition
Watching the bend and peel was painful
Beautiful build!
This was a nicely edited video. I've never seen anyone install Mlock like that. I usually just twist the locking piece by hand then insert and tighten. It makes me want to upgrade my M4.
Its if i didnt screw the mlok piece on enough i just push it into place and it works
Ya I use a tiny flathead screwdriver to make sure it at 90° than you know it’s good to go
You’re nice with it man.
Dope build 🔥
Dude dope build video
Another amazing build! This channel is fire!
I appreciate it brother
Love your work, Cheers
You have nice taste and don’t load with unnecessary bs. I subscribed bro keep them coming🤙🏼
Appreciate it brotha
Very entertaining and informative content 👏 thanks
Best asmr, what i ever seen. 😁
Damn.....Well Done!
Bro, i always wanted a Benelli m4, but couldn't afford and yes i have heardof the Turkish clone but was kind of avoiding to buy one of those but after watching this im definitely going to buy one now and im subscribing to your channel, thanks man now my dream will come true
Glad I could help
You should do research first. Most don't run
Throws parts around like a professional
Sweet ride
That's fire 🔥
Thanks bro I knew you would do it right putting my new gun together can't wait for you to ship it back to me 😄. Im Jk nice build. 👍
"And Mr. Wick, do enjoy the party."
Nice build 9/10. The Eotech is my only major criticism. They are bit heavy for me for the application, and I prefer less interference in my field-of-view when tracking moving targets. Many would disagree; but they haven't ran drills in the 100 degree sun beating down. Eotechs are not light, and ounces turn to pounds in the real world. Those quick targets turn into a challenge over a few hours.
I opted for a different rear stock and a light-weight holosun for optics. I also immediately coated mine a lighter tan. Black is not friendly in the sun. I have a slightly different flashlight setup that doesn't have so much excess cable, but that's easily alleviated. Snagging is never fun.
Otherwise, 9/10. I would move the extra shell carrier just a bit forward for my long hands, but otherwise; mine is set up very similarly. I did run a fine steel-wool cylinder brush through the magazine tube to polish the feeding though. Mine was a little rough from the factory, and the friction inside the tube was noticeably impeding some shells. It was not enough to cause malfunctions, but it was enough to notice if one has any time behind the system. After just a bit love TLC though, it felt much better.
I also deburred many sharp edges with slight beveling to save my hands and gloves. My ejection port was especially sharp in a few small areas and just needed a few passes with my stones. I highly recommend everyone to spend just a little time on their "Turknellis". Some of the early imports need a lot more love. The newer ones seem to have much better machining and finish quality. That being said, a little preemptive attention can go a long way!
I like eotech since its more durable but yes battery life and weight is its not so great features, i thing the circle and dot makes my target acquisition so much better but i know what you mean exactly. Done a few 12 mile rucks in my life and the difference between 45lbs and 50lbs is huge haha
Nobody is taking this piece of shit to war dude.
This looks like A lot hassle
Sounds like an "I'm too poor for an eotech" excuse lol
@@joshmeadows4147 Sounds like someone doesn't know there Optic history, has never ran any drills, competed or owns multiple rigs. Here's some advice from someone that knows better.
Eotech settled a CLASS ACTION LAWSUIT for known defects. I know, because I have a 512 that my friend sold me after getting it fixed. Furthermore, Eotechs are about twice as heavy as some of my other favorite optics, and the battery life isn't even close.
Eotechs also take up considerable real-estate. Many that run 3-gun prefer as little weight on their shotguns with as much field of view. I implore you to go to a match and see how many are running Eotech on ANYTHING, let alone their 400 dollar Turknelli.
SPOILERS: Not many if any at all...
What a coincidence... I also upgraded my MAC 1014 a few days ago. Mines has the marine finish and all I did was upgrade to the MI rail, MI charge handle, vert grip, and the RX arms extension tube for matching finish.
At this point most of my "airsoft" things are slapped with MI parts.
MI is great i liked how the rail looks a lot on the mac1014/benm4 clones
As a non gun owner from Australia i would have loved to see a little description of what the part is that is coming off the gun and what the benefits are of the upgraded part going back on.
Mainly aesthetic, but the rail allows me to attach the light and the handstop for recoil control. More ammo capacity was added as well
PRESSSSSSUURRRREEE!!!!!! Subscribed and Liked!!!
Best company Benelli ❤
Very nice 😊
Sick freaking gun. I would’ve put the hand stop and light control further forward though. You won’t be able to quick load 2-4 shells at a time with it so close to the loading gate.
I changed the hand stop to another better one and did push it forward a tad bit thanks for the tip👌
This is so nice like I like a good monologue but from some people it’s so annoying
Wish you would have posted a build list for this
Its in the breakdown video brotha
I need a build list for this beauty
I commented the list somewhere in the comments under someones reply
Misleading video title… this is the perfect amount of upgrades for any weapon.
I'm considering on getting one and purchasing some upgrades.
How did it run compared to when you added the upgrades to the shotgun?
I didnt even shoot it not upgraded, but is should run the exact same regardless since i didnt change anything about the operating system. It runs great no jams im not going to clean it either so i can do a thousand round review / setup video
its impressive i thought youtube didnt allowed that kind of content but i am all for it its so cool./
No comment haha
Where can I order the shotgun shell stop that you have inserted to hold the shotgun shells in the magazine tube?
Rangenord has a store on amazon and the web
fire🔥🔥🔥🔥🔥
Do u have a part list on this. I want that handrail and that magazine extension
Its somewhere in the comments but the handguard is from midwest industries and the mag tube extension is choate tool
Hey Great content Bro. Earned another sub Thanks for sharing. Could you do a parts breakdown like you did for your spear video. I am really digging this set up and would like to get something similar or see what the cost range is for something like this. Thanks and have a good one!
Oh yeah im going to do one thanks for the sub!
Yeah will be on e-bay parts for sale with my skills. Nice
This reminds me of those cars that look beat to shit on the outside but has a thousand dollar sound system inside.
Có vid khẩu sig spear ko anh giai ơi
dude VIOLATED that snap ring
Watching this hurts my bank account
Nice video. I like how you titled it, kinda knowing it’s just overdone. Looks like a tactical build once you put the flashlight on. I don’t get the matchsaver round on tactical shotguns I switched to shotgun cards on the side. Every long gun needs a sling so you can free up both hands.
Only question I have is how useful an eotech and flashlight at night are?
Eotech and flashlight are the best at night with and w/o NV
Did u have to replace the ammo tube spring for a longer spring ?
No stock spring worked fine
real ASMR
dremel the loading port 3-gun style
me in video games:
I luv this set up. Do u have a link for options?
Sorry i cant post links for firearms🙏
Great
Im watching this just wishing i had the spare money for the gun, let alone half of those after-market parts
No stock pad? Sad
I wish there was more content like this on YT
*shotgun bros* just one more shell bro trust me i just need one more no its totally normal to carry a shell in the chassis outside the tube its another shell bro cmon one more shell
🔥🔥🔥🔥🔥
Do this for more shit, It was amazing to watch
Can you modify the feax adjustable stock to be adjustable??
Yes anything that works on the benelli M4 itd be interchangeable
Will it perform just as well as a similarly upgraded Benelli?
Testing it atm
Idk much about guns. But since this is a benelli clone, you can just buy the modifications for the benelli and put it on the turknelli? Or need specific parts for that?
This one in particular can take all genuine benelli parts
@@vietnamtactical thanks for your response! Good to know :)
@@vietnamtacticalCan I do something similar on a stoeger m3000 defense?
No the stoeger m3000 is a completely different gun so the specs for this would not fit the m3000, there is most likely parts out there though.
@vietnamtactical Dang it the shop I bought it from said it was a cheaper version of the benelli lol I guess not. Your gun came out sick though. I'll have to look into parts for mine
the day i know i can just buy a clone
Damn very nice how much did you spend on the upgrades?
Without the m640 and eotech it was only around $450
Where did you get that shell catch upgrade?
Rangenord
I want one
Awesome upgrades! Are you going to do the stock too?
Most likely not since the only stock i like is the M4 3pos stock and its $650 with the recoil tube
@@vietnamtactical Yeah man, it's absurdly expensive. Does the stock on the Turkenelli actually collapse at all or is it fixed?
does anyone know how good these shotguns are? just saw they are 400 bucks and now im very intrigued
Surprisingly it runs extremely well, ive had bad experiences with turkey made guns but this one feels and runs as well as a benelli m4, ofc i only have 800 rounds thru it no cleaning but as of now thats a lot better than the GF1 shotgun i have
Where did you buy dummy shells?? Thanks!
On amazon for cheap haha
how much did it cost after all the upgrades?
Honestly not sure but ill make a video on it long form style talking about the price and setup
Looks sweet. How does she run?
Runs pretty great actually ima be posting a 9+1 run, ive only ran around 600-800 slugs thru it it hasnt failed yet
" Could you recommend anything for the end of the night ? "
" Something big, bold ? " - Mr Wick
" May i suggest the Benelli M4 ? " - Sommelier
How hot does that handguard get? The plastic one gets super hot when running it hard
The handguard isnt too bad its the barrel id look out for i accidentally touched it quad loading got a blister, ripped it off tho
@@vietnamtactical fact. Ordered one yesterday. Also picked up a polymer heat shield for the barrel from Trinity Supply. As you said, the barrel is the enemy usually
Accessories for this cost more than the gun itself -
with gameplay sir
thinking about getting a turknelli, stuck between the panzer m4 and this
Heard panzer actually has some issues, i only got this because I havent seen a single bad review on it and unlike panzer big companies like midwest industries and agency praises it as well
@@vietnamtactical oooh thank you for that! appreciate the reply :))
Can u please make more videos like this
If i could buy a new gun and parts every week id be glad to haha
❤❤❤
А потом вышел такой с респа....голова,глаза, гг, топ
Wery good . thanks for video. Do you love MAC 1014 ?
It made me like shotguns again
Very cool man, I'm in a country where you can't own guns
So, despite your profile saying you're from the United States, you aren't?
진짜 대박 택티컬!!!!
👍👍👍👍
It's that John Wick 2 shotgun in shopping right?
Kinda
❤❤😊
Did you overclocked your shotgun too?
?
👏👏👏👌👍😉😍💪💪💪❤️
I liked it but would have lost the light and eotech
Parts list?
Surefire X640DF + Button and Plug Adapter
Rangenord Shotgun Shell Holder + Mlok Screws
Left Side Armory Hand Stop
Eotech EXPS3-0
Midwest Industries Benelli M4 Handguard (Long)
Midwest Industries Benelli M4 Charging Handle
Briley EZ Bolt Release Handle
GG&G Benelli M4 Mag Tube Follower
Choate Tool + 2 Mag Extension
I think thats it
@@vietnamtactical Pretty sweet thank you.
what do you do for work and how do i do it????
Local recruiting office😭
@@vietnamtactical youre in the service?!
When your handguard costs more than the entire gun 💀
It was like half the cost of the gun haha
@@vietnamtacticalya I know is a joke. I don’t understand why people buy budget imports then waste money on attachments. A $400 gun with $1000 worth of attachments is just dumb
@lukeestep7775 it was kind of a joke setup but with a good reasoning behind it. I dont like shotguns, so buy $2000 shotgun + $1000 attachments or buy a $370 shotty with the attachments? This is really its test run to decide if i want a genuine M4 or not
Way sick! Let me get a list!?!? How much all in besides sure fire and exps?
Not that much maybe $300?
I think you’re not an idiot like the most of them that paying $1500 more + upgrades for the same gun,well done bro you’re smart guy.
Awesome. Now does it actually work?
Yup in the middle of a 2000 round review
@@vietnamtactical yea!!! Nice!!! That's the most important thing to me!
Yes im taking antipsychotics im really slow now....but when im off theme you Will see the speed...
If it's what you need it's not over upgrading, just upgrading
I considered it over upgrading since its a cheap gun with great parts haha
What do you have invested
No idea
as a none american person who has 0 experience with guns, what do these things each do?
Aesthetic, ergonomics, more ammo, enhanced sighting system, faster reloads
All that extra stuff on a Benelli clone😂 why not get a real one?
Dont like shotguns. Touching the water to see if i would even like to shoot the thing more than 3 times a month and if i do ill buy the real one and replace the parts.
Que pena que aqui no Brasil a gente não pode comprar nem a arma e nem todos esses acessórios, primeiro porque a lei não permite o cidadão de bem ter sua arma para defesa e, segundo que é tudo muito caro, a arma em si já é uma fortuna e cada acessório desses também custam uma fortuna!
Sooo how much was this after everything lol
I have no idea ima make a vid on it where i add everything together tho
Does it jam?
800 rounds no cleaning not a single jam