Trust me - after several attempts with screwdrivers and punches and several broken knuckles later, I opted for the relatively cheap tool. If you are lucky enough to not have a stuck one you can probably use the screwdriver method. Mine took a little over 100ft-lbs to “pop”
Super educational vid. Thanks for taking time to produce and post so the rest of us can learn from your knowledge.
Well done sir👍
Nice job! Thanks for sharing 💪
How do I take the pressure out of the high pressure and also does he have gas in it, is is ok to do with gas in it?
Thanks
how can i find it (this part) on the internet
GM Part# 19168739
AC Delco Part# M10131
What hose is the one with the blue attachment
If you mean with the blue clip, that is just evap out to the charcoal canister, not a fuel send/return.
can you give us GM code of this part?
In stead of buying that tool you can do it with a flat screw driver and a hammer.
Trust me - after several attempts with screwdrivers and punches and several broken knuckles later, I opted for the relatively cheap tool. If you are lucky enough to not have a stuck one you can probably use the screwdriver method. Mine took a little over 100ft-lbs to “pop”
@@ihavemadeahugemistake where can you get the tool?
@@clinteast7476 Here is the tool I used: www.amazon.com/gp/product/B086LK9R7T/
@@ihavemadeahugemistake thank you