SANDCRAFT DIY Installation - Driveline & Carrier Bearing Combo w/ Grease Whip - Polaris RZR XP Turbo

Full start to finish installation of a SANDCRAFT Driveline & Carrier Bearing Combo with Grease Whip on a 2020 Polaris RZR XP Turbo. Check out the timestamps below to jump to a specific step and be sure to download the printable instructions PDF as well.
--------------------------
TIMESTAMPS
00:00 - Introduction
00:23 - Clutch Cover and Skid Plate Removal
00:48 - Transmission Flange Removal
01:20 - Scatter Guard and Sway Bar Link Removal
02:15 - Driveshaft Roll Pin Removal
02:54 - Driveshaft Removal
03:30 - Grease Zerk/Whip Hole and Explanation
05:25 - Scatter Guard Installation
05:50 - Carrier Bearing Base Plate Installation
07:42 - Driveshaft Installation
08:47 - Carrier Bearing Installation to Base Plate
09:33 - Roll Pin Bolt and Set Screw Installation
10:20 - Sway Bar Link, Skid Plate and Clutch Cover Installation
11:00 - Grease Whip Installation
12:45 - Conclusion
--------------------------
PRINTABLE INSTRUCTIONS
bit.ly/3je8qkD
--------------------------
REQUIRED TOOLS
• Paint Marker
• Button Removal Tool
• T-40 Torx
• Torque Wrench
• Ratchet Wrenches
• 8, 10, 13, 14, 15, 17mm sockets
• 13mm and 17mm Wrenches
• 4” Socket Extension
• 8” Socket Extension
• Socket Swivel
• Hammer and Punch
• Bearing Puller Tool
--------------------------
PRODUCT DESCRIPTIONS
SANDCRAFT drivelines solve three major critical issues. This upgraded driveline is rated three times stronger than stock, it’s upgraded with larger U-joints, larger yokes and larger diameter shafts with double the wall thickness when compared the stock/OEM drivelines. This is coupled with a “Phased and Balanced” critical driveline manufacturing process that makes for the perfect combination. When you operate your UTV over 40 MPH you are exceeding what the driveline is rated for. Our driveline was engineered for your machines capabilities and much, much more.
SANDCRAFT drivelines are designed to handle critical dynamic loads by maximum attention to detail. We have calculated twist loads, causing a severe need for increased U-joint and tube diameters, all while being phased and balanced. When packaged with our PATENTED carrier bearing it is the absolute best option. This heavy duty package is designed to be installed with ease. Every nut, bolt and Loctite needed is provided making this install easier than any other option.
SANDCRAFT Carrier Bearings allow you to service your bearing by adding grease through a fitting mounted to the housing. The grease whip inserts into the housing, allowing you to run the tube up through your center console so that you don’t have to crawl under your car to add grease. Who likes working underneath muddy, dirty cars? No one.
Bundle and save with the Polaris RZR Turbo Driveline and Carrier Bearing Combo! Finally you can solve one of the largest issues with the Polaris RZR’s drivetrain with our upgraded Driveline and Carrier Bearing Combo! Stop all vibration with a true phased and balanced driveline along with correcting the operating angle. This is the perfect solution for the smoothest ride possible!
--------------------------
PURCHASE LINKS
Driveline & Carrier Bearing Combo - bit.ly/32yUigg
Grease Whip - bit.ly/3hAmkMi
--------------------------
CONTACT AND SOCIAL LINKS
Check us out at www.SANDCRAFTMotorsports.com or call us at [phone].
SANDCRAFT RCR Main Channel: / sandcraft_rcr
Instagram: / sandcraft_rcr
Facebook: / sandcraftmotorsports
--------------------------
#SANDCRAFTDIY #SANDCRAFTMotorsports #SANDCRAFTRCR

[@genelong203]

He makes getting the scatter guard out look easy.

[@robertcroslin2883]

Excellent video! Thank you for the detailed install info.

[@user-qq9jd6qw1v]

Is this the same for a 18 1000xp?

[@CoryDorningMaker]

Is this different on a non turbo because the gas guard does not line up