Heavy Duty Prop Shaft Install | Polaris RZR Turbo S | Rhino Driveline
Vložit
- čas přidán 3. 08. 2024
- In this video we show you how to install SuperATV HD Rhino Drive Line prop shafts and carrier bearing into a Polaris RZR Turbo S.
Rhino Driveline Prop Shafts are the only prop shafts that are strong enough to handle every ounce of power your Polaris RZR XP Turbo S can put out. Maximized shafts paired with U-series U-joints that wear less and run smooth mean it can withstand tons of torque. Bolster your driveline’s backbone with SuperATV’s expertise. Upgrade to a Rhino Driveline Prop Shaft and drive your Polaris RZR XP Turbo S like you never could before.
FEATURES
Rhino Driveline Shaft:
Shaft diameter is .5” larger than stock
Shaft wall is .120” vs stock’s .088”
Made of 4130 chromoly tubing (stock is plain carbon steel)
U-Series:
Uses a traditional needle-bearing U-joint
Made of 4340 chromoly steel
Phased and balanced-no vibration
Sealed for long lasting operation
Get your HD Prop Shafts today:
www.superatv.com/polaris-rzr-...
#SuperATV #RhinoDriveline #BuiltForBattle
00:00 Intro
00:04 Tools List
00:21 Remove the Roll Pin from the Prop Shaft
01:07 Remove the Motor Mount
02:52 Remove Your Seats
04:36 Remove the Front Prop Shaft
05:43 Remove the Rear Prop Shaft
06:50 Install the SuperATV Prop Shafts
08:23 Finish Prop Shaft Install
09:41 Pin the Front Prop Shaft to the Differential
11:06 Fully Tighten Hardware - Jak na to + styl
I noticed that the front shaft don't have the channel in the spline like the rear for the weight purposes and vibration....do I not have to worry about it?
These are balanced from the factory and do not need additional weights. Give us a call if you have additional questions 855-743-3427
IS THERE A WAY TO DECREASE THE WIDTH OF A UTV MY TRAILER IS A LITTLE OVER 57 INCHES CAUSE OF THE RAILS INTALLED
First thing we would recommend is looking into getting different wheels with negative offset.
@@SuperATVMedia HOW MUCH NEGATIVE...ISNT A NEGATIVE OFFSET MAKE IT WIDER?
@@joshuagomez6148 Either a 6-1 or 5-2 offset wheel is your best options.
@@SuperATVMedia THANK YOU
Have u guys ever done 1 of the new pro xp's I just put a rhino bounty series in mine and there is literally no way of doing the carrier bearing from the top if u have any ideas or videos please post a link to the video cuz I played hell with mine and it's still vibrating even with both new shafts