RZR Pro XP Gets A Sandcraft Carrier Bearing Installed, Factory Bearing Is Cooked!
Vložit
- čas přidán 19. 03. 2023
- Link for this carrier bearing: www.glifeutv.com/products/car...
GLIFEUTV AFFILIATE LINK: www.glifeutv.com/somewhathaggard
This week we install a Sandcraft carrier bearing on Dude's 2021 RZR Pro Xp. This is a direct replacement for his cooked factory one.
Thanks for watching! Please like and subscribe!
For more content / @somewhathaggard
Follow us on Facebook / somewhathaggard1
Follow us on Instagram / somewhat_haggard
Want to support companies that supports us??
Looking for parts for your sxs & want to support our channel???? Right now, the best way you can do that is by using our glifeutv affiliate link! They have parts from a bunch of best companies in the industry. Do us a favor and use our link next time you need parts for your machine. Anything we make from this channel goes right back into the channel and will help us continue to make better videos. Thanks for your support.
www.glifeutv.com/somewhathaggard
FAR Offroad LLC Contact Info: faroffroadllc@gmail.com
Far Offroad LLC Facebook: profile.php?...
RPM Powersports
rpmsxs.com/
Use Code "HAGGARD" At Checkout for 5% Off!!
Midwest Dirt Fiend LLC
midwestdirtfiend.com/
Use Code "somewhathaggard" To Save 5% Off!
Jet-Hot High Performance Coatings
www.jet-hot.com/
Tell them Somewhat Haggard sent you & save 10% off your coating!!
Contact Us: somewhathaggard@yahoo.com - Auta a dopravní prostředky
Happy birthday Dude!
Thank you for sharing
🤗🙏🇺🇲
Thank you for watching!!
I like how you edited out the part where you guys were under the vehicle together on those pillows spooning. Keepin it classy 😅
Haha class acts here
Solid upgrade!
Yeah it’s a nice part!!
Keep on like that, you guys are doing great videos! Is there a torque spec for the 5/16" bolt that goes in place of the roll pin? Cheers from Croatia!
Thank you!! We didn’t use any specific torque spec, just snugged it down. I’ve read that you don’t wanna over tighten that one. Awesome to see that we’ve made it to Croatia!! Thanks for watching.
Great video! Did you notice a difference with sandcraft bearing since alignment it better? Less vibration as they say? Worth the ungrade? Been wondering if I should upgrade on my pro xp4.
Thanks! I’d say he’s gotta put more miles on it before we’ll really know about any vibration differences. It’s definitely a nice looking part! I’ve got the oem replacement on my pro and it feels very cheap. After seeing this one in person I felt like I should have just got this over oem. I’m really curious to see how long this one will last over the factory one. I’ll make sure to give updates we notice anything with vibrations and overall longevity of the bearing.
Great video, SANDCRAFT doesn’t even have a detailed video for the Carrie bearing. Question! Does the retaining clip go back on the new bearing?
Thanks!! If I remember correctly the bearing ended up covering the the groove for the clip so we have it on clip less. It’s still working great no issues.
Good to hear, I have the pro xp 4 so I needed 2 carriers. Something did not seem right that you wouldn’t put the c clip back in to I actually talked to clay from sandcraft and turns out the brass ring was never suppose to ship with the pro xp’s. Master tech said the shaft going to the diff is ok because it’s bolted in place but mine has a floating middle shaft so it was no bueno. Got it all corrected and c clip went back into place.
Clip does go into place. Seems like loctite is overkill with the clip in place.
Thanks fellas, nice work!
Could you check and share that locking pin diameter? I'd like to get the correct size chisel bit...
Thanks!!! I don’t remember off the top of the dome but here is a link to the roll pin punch used in the video www.quad-logic.com/shop/sportsman-400/driveline-suspension-sportsman-400/roll-pin-punch-tool/
@@SomewhatHaggard Awesome! Thanks again for your help.
No problem