I started sweepin floors and washing parts in a truck shop in 1957. Thee were no grinders in the shop that were operated with a motor. They were all hand powered. Your job would have been done with a file. BTW...I have ordered a ditch bank 55" cut flail mower. I hope it serves me as well as your has served you. You did a good job of sharpenin and videoin. Also there is no way I could bend over that long. I'd have to sit flat down on the floor and then call for help to get up.
Good demonstration. I did mine the long way by removing all hammers , took me an afternoon. Next time I'll follow your method, sure would save time . Thanks
I like the way you sharpened the blades but kept them "blunt" for lack of a better word...keeping the cutting edge thick and less prone to dents and deformities. Also, when you flipped that thing over I'm pretty sure I saw a green tint to your skin! 😉 #JonSmash #Hulk
I wish my hammers looked half as good as yours. I have a hydraulic tilt and offset so no way to move by hand but the nice thing is I don't have to ;) gonna be doing this in the spring for sure. I bought two replacements just in case. Hit a Boulder (didn't know it was there) so bad it broke two bolts!
That mower is a keeper and looks like new good sharpened up. With shipping btw its pretty much double $$$ 2022 . I have their 48" tiller it looks identical expect underneath when you flipped it over. 😂
I’ve tried to keep it looking like new. Not sure if you remember but I did give it a fresh coat of paint and a new decal last spring. It really has held up well mechanically even though the original paint was terrible. *Keep on tractoring!*
Nice mower and good tip to sharpen. I use a rather expensive 6ft flailmower for the ATV quad bike here in Ireland. It has its own B&S v-twin petrol engine (29hp I think). But it is a beast. Second year going and I did hit a few nasty stones....So at the end of this season will sharpen them all. But having an engine with oil on top means I can only tip it so far... So may take the flails of and use the bench grinder. will see. Althpugh perhaps the flap disks on the angle grinder are better as the follow the shape a bit better as it does not need to be exactly a straight line..
You should try removing pins, hangers, and flails from two 6 foot mowers. Sharpen them all up and then re-hang them. I think there were 144 flails? One mower was on a 3pt, the other was hydraulically mounted.
Good evening Sir, Great set up for grinding and yes you did learn from the hard way ( distance of the camera from the heated action ) 😎👌Pretty good sharpening Sir that you have 👌🧐👍Changing the oil in the gear box ? Keep up your OUTSTANDING Family Daddy Work and OUTSTANDING videos Sir Cheers 🍻🍻
I probably should change gear box oil but that's just going to have to wait for another time. It should be good for quite awhile yet. Hope you had a good Thanksgiving! Keep on tractoring!
Good evening Jon.. Great video. So… I have watched your video you did on comparing flail mower and Brush hog… and a few others.. I will have one soon.. I just can’t decide what would be best for me.. I don’t really have much high grass it is mostly brush.. Both my tractors have turf tires on them so I have to be a bit more cautious what I run over.. I do use them in the woods but just keep my eyes open.. I did put a stick in my JD 1025 and had to put a tube in.. I have never seen a flail mower work other then on videos.. Brush hogs I have been around and they do pretty good job.. I do have a DR Walk behind brush mower and it is a beast.. If I can push it over it will cut it.. But I have to walk behind it.. At my age and having both hips replaced I can’t do it for long.. oh well that’s enough whining. I just need a push to make my decision on either. Thanks for sharing.. As always stay safe and always be kind.. Cheers..
Hey Gus! Thanks for supporting the channel. The flail mower definitely will leave a nicer finish and can handle some pretty good size brush. A brush hog has its place to knocking down larger stuff quicker. However the flail shreds it up into little pieces. Then there’s the price point to consider also. Ultimately you’ll be happy with either. Keep on tractoring!
I replaced my brush hog with a flail a few years ago.the cut quality is probably a little better with the flail, but the compact dimensions compared to brush hog make a hands down winner. Whether maneuvering in the field or storing space, flail is superior.
My WoodMax flail mower has a flip up housing side, allowing blade access without having to dismount the unit and muscle it around... Don't cha love those angle grinders???
I’ve noticed that your tractor does quite well with the flail mower even though they recommend 20 HP at the PTO for the 48 inch medium duty model. Do you think the BX could handle the Heavy Duty model?
I think it could handle the heavy duty version but honestly I think it would be overkill. I think the medium duty with hammers is all you really need. Keep on tractoring!
Hello jon I didt know you could sharpened it. I thought you had to buy a new one every time. Did you know I got a new flashlight last Christmas. It call a soon fire flashlight its evey bright.
I started sweepin floors and washing parts in a truck shop in 1957. Thee were no grinders in the shop that were operated with a motor. They were all hand powered. Your job would have been done with a file. BTW...I have ordered a ditch bank 55" cut flail mower. I hope it serves me as well as your has served you. You did a good job of sharpenin and videoin. Also there is no way I could bend over that long. I'd have to sit flat down on the floor and then call for help to get up.
Good demonstration. I did mine the long way by removing all hammers , took me an afternoon. Next time I'll follow your method, sure would save time . Thanks
Nice work Jon
I like the way you sharpened the blades but kept them "blunt" for lack of a better word...keeping the cutting edge thick and less prone to dents and deformities. Also, when you flipped that thing over I'm pretty sure I saw a green tint to your skin! 😉 #JonSmash #Hulk
Just a slight angle on the edge is all it takes. HULK power!
Keep on tractoring!
Nice work Jon!!! 😁👍 You have a stronger back than me. Thanks for the video🚜💨
I wish my hammers looked half as good as yours. I have a hydraulic tilt and offset so no way to move by hand but the nice thing is I don't have to ;) gonna be doing this in the spring for sure. I bought two replacements just in case. Hit a Boulder (didn't know it was there) so bad it broke two bolts!
I don't have any rocks other than a brick a hit once. It's shredded it into little pieces but sure made an awful racket.
Keep on tractoring!
Great way to sharpen the hammers. I’d love to get a flail mower myself. But that will have to wait. Take care buddy!
They really do a great job of cleaning up field edges. I think you’d really enjoy it.
Keep on tractoring!
That mower is a keeper and looks like new good sharpened up. With shipping btw its pretty much double $$$ 2022 . I have their 48" tiller it looks identical expect underneath when you flipped it over. 😂
I’ve tried to keep it looking like new. Not sure if you remember but I did give it a fresh coat of paint and a new decal last spring. It really has held up well mechanically even though the original paint was terrible.
*Keep on tractoring!*
removed sharpened then weighed for balance is the correct sharpening procedure before replacement with new HT bolts.
What type of flail mower do you own?
Keep on tractoring!
@@ritterjon a german made Jansen 1.24m very similar to your machine.
They are fantastic for clearing brush !
Nice mower and good tip to sharpen. I use a rather expensive 6ft flailmower for the ATV quad bike here in Ireland. It has its own B&S v-twin petrol engine (29hp I think). But it is a beast. Second year going and I did hit a few nasty stones....So at the end of this season will sharpen them all. But having an engine with oil on top means I can only tip it so far... So may take the flails of and use the bench grinder. will see. Althpugh perhaps the flap disks on the angle grinder are better as the follow the shape a bit better as it does not need to be exactly a straight line..
love the practical video 'ritter;
Nice Job Jon!
Thanks! 😁👍
Keep on tractoring!
Nice job Jon! 😁👨🚒
Thanks
Keep on tractoring!
cute flail
You should try removing pins, hangers, and flails from two 6 foot mowers. Sharpen them all up and then re-hang them. I think there were 144 flails? One mower was on a 3pt, the other was hydraulically mounted.
You’ll be ready for spring! I ruined a lens with grinder sparks too. 😢
Yep, look at me, getting equipment ready for a season ahead of time.
Keep on tractoring!
Good evening Sir, Great set up for grinding and yes you did learn from the hard way ( distance of the camera from the heated action ) 😎👌Pretty good sharpening Sir that you have 👌🧐👍Changing the oil in the gear box ? Keep up your OUTSTANDING Family Daddy Work and OUTSTANDING videos Sir Cheers 🍻🍻
I probably should change gear box oil but that's just going to have to wait for another time. It should be good for quite awhile yet. Hope you had a good Thanksgiving!
Keep on tractoring!
Good evening Jon..
Great video.
So… I have watched your video you did on comparing flail mower and Brush hog… and a few others..
I will have one soon.. I just can’t decide what would be best for me.. I don’t really have much high grass it is mostly brush.. Both my tractors have turf tires on them so I have to be a bit more cautious what I run over.. I do use them in the woods but just keep my eyes open.. I did put a stick in my JD 1025 and had to put a tube in..
I have never seen a flail mower work other then on videos.. Brush hogs I have been around and they do pretty good job..
I do have a DR Walk behind brush mower and it is a beast.. If I can push it over it will cut it.. But I have to walk behind it.. At my age and having both hips replaced I can’t do it for long..
oh well that’s enough whining.
I just need a push to make my decision on either.
Thanks for sharing..
As always stay safe and always be kind..
Cheers..
Hey Gus! Thanks for supporting the channel. The flail mower definitely will leave a nicer finish and can handle some pretty good size brush. A brush hog has its place to knocking down larger stuff quicker. However the flail shreds it up into little pieces. Then there’s the price point to consider also. Ultimately you’ll be happy with either.
Keep on tractoring!
Looks good John. 👍✊.You in Louisville yet?
I have been thinking of getting a flail mower for my Florida property but still using the brush hog I’m on the fence about it right now
It make for a nice addition to shred stuff up. Also it is terrific ballast. I think it weighs 600 plus.
Keep on tractoring!
I replaced my brush hog with a flail a few years ago.the cut quality is probably a little better with the flail, but the compact dimensions compared to brush hog make a hands down winner. Whether maneuvering in the field or storing space, flail is superior.
My WoodMax flail mower has a flip up housing side, allowing blade access without having to dismount the
unit and muscle it around...
Don't cha love those angle grinders???
I do love angel grinders. They come in handy for all sorts of stuff.
Keep on tractoring!
It looks like your gonna be adding a set of flail mower knives to your St. Nick's list.
That's not a bad idea, maybe next year though. I think I can get another year out of these.
Keep on tractoring!
I’ve noticed that your tractor does quite well with the flail mower even though they recommend 20 HP at the PTO for the 48 inch medium duty model. Do you think the BX could handle the Heavy Duty model?
I think it could handle the heavy duty version but honestly I think it would be overkill. I think the medium duty with hammers is all you really need.
Keep on tractoring!
Hello jon I didt know you could sharpened it. I thought you had to buy a new one every time. Did you know I got a new flashlight last Christmas. It call a soon fire flashlight its evey bright.
And I thought I was the only dinosaur running the C3 tools.
The C3's are still working well for me. I can't believe they've lasted as long as they have.
Keep on tractoring!
Did you get the joy of finding the freezer died the week before with meat in it? I had that joy one time.
We lost very little food and we’re able to save all of the meat. Very lucky considering we had a quarter beef in there.
Keep on tractoring!
Won't it through it out of balance ?
Not enough to notice.
Keep on tractoring!
🤣I read HOW to Sharpen a Frail Mower.
LOL 😂. Oh Margaret...
Keep on tractoring!