FUNKY FARMER MERCH available here teespring.com/... FOLLOW ME ON FACEBOOK / theoriginalfunkyfarmer INSTAGRAM www.instagram.... WEBSITE www.richardcornock.co.uk
Could you run a bead of hard edging along the bottom edge of the flail with the welder before sharpening them. I used to hard edge the shares on my Fergy plough. It literally trebled their life and the plough seemed to dig in better if the going was a bit hard.
Has anyone tried some abrasion resistant hard facing powders (applied with an oxyacetylene torch) on the hedgecutter flails? Some chaps in the country with the blue and yellow flag were allegedly doing some Porton Downs type stuff. The Russians weren't waiting around for leaky drain pipes to happen at the lab.
How about investing some very hard earned money if you have any left, on buying a fairly large inverter so you can rub your 230 volt grinder and other mains tools from a 12 volt battery. I've got a 1500 watt continuous 3000 watt peak for around £150 to £175. Even run from a good tractor battery. Just a thought.
Rich would it not pay to take them off and do them on a rainy day you can clamp them in the vice job done also it looks good around the farm not being soaking wet you can do a lot more be careful what you say he might watch your channel some thing stray might come along lol I have just prepared a stir fry for tea don't go down that road rich I have had my life it's my 4 sons time and grand childrens time god bless it don't come to that it is frightening
Get a set of t flails and do a proper job of the hedges ducks foot flails are fucking useless more for cutting grass not chewing the hell out of hedges.
💕Your sharpened flails now remind me of steel top capped boots💕
Could you run a bead of hard edging along the bottom edge of the flail with the welder before sharpening them. I used to hard edge the shares on my Fergy plough. It literally trebled their life and the plough seemed to dig in better if the going was a bit hard.
Hi Richard for as long as I’ve known we change ares every 2 years
Great video on the hedge trimmer great job Richard 👍☝️
Glad you got all of the trimming done, I know you were feeling a time crunch on it.
Good job with the video. I think we’re all with you politically. It needed saying.
When I'm on hedges i sharpen every 3 days and verges is every day
Agree, doing them regularly is a nice quick job.
Nice job Richard
Nice one Richard . The Russians got to your camera
👍👍👍
18:22 bumping and grinding 😂
I always heard it gets very foggy over there in jolly old England LOL
Ha! I thought it said FAILS!
Ask farmer P he'll keep you right Was your muck movie Cornocks last stand?
Has anyone tried some abrasion resistant hard facing powders (applied with an oxyacetylene torch) on the hedgecutter flails? Some chaps in the country with the blue and yellow flag were allegedly doing some Porton Downs type stuff. The Russians weren't waiting around for leaky drain pipes to happen at the lab.
Flappy discs are better for sharpening up flails as they don't heat up like a grinding disc does
How long do you have the hedge cutter
Il swap u a pack disk for grinder for that old castrol can aun the shelf lol
How about investing some very hard earned money if you have any left, on buying a fairly large inverter so you can rub your 230 volt grinder and other mains tools from a 12 volt battery. I've got a 1500 watt continuous 3000 watt peak for around £150 to £175. Even run from a good tractor battery. Just a thought.
Great video Richard just hope to God Veronica dosn't create a steamy video lol
Hi. Do u farmers get paid subsidies over there?
Hello they last longer if you put them on back to front like farmer p did with one of his
😄
Don't apologies for the politics, its will affect all of us, created by one bad person. Keep producing food!
Comment section is always the same on these videos, it works for him so what's the problem
scrap prices are on the rise again maybe purchase new ones now and next week scrap old ones gain some money back
Take an hour and dress them after everytime you use it.
Rich would it not pay to take them off and do them on a rainy day you can clamp them in the vice job done also it looks good around the farm not being soaking wet you can do a lot more be careful what you say he might watch your channel some thing stray might come along lol I have just prepared a stir fry for tea don't go down that road rich I have had my life it's my 4 sons time and grand childrens time god bless it don't come to that it is frightening
Looks like a filter is on
Can you do more of Harry's toy farm
I know this will not sit correctly with you. However why don't set up a page where your viewers can buy a part for you.
I was thinking the same, Farmer P appears to get lots of things sent to him👍
Dose Harry have his channel
not yet
politics is just hot breath creates steamy content
First
Why do you and Farmer P cut your hedges in the winter?
Because the birds aren't nesting in the hedges in the winter
@@andrewgriffiths2789 ah. Never even thought about wildlife. Thanks.
@@jimpolk cut hedges between oct to march
@@bobyates4115 I understand now why.
Most of those flails look like they need replacing.
You need to join the Ukrainian farmers stealing tanks. 😂
Get a set of t flails and do a proper job of the hedges ducks foot flails are fucking useless more for cutting grass not chewing the hell out of hedges.