Another great gun and video, when I ordered the VFC Carl Gustav it took 3 months and I only got confirmation on the 2nd month. Thankfully I got the beauty but I probably won't be ordering from swit again because of their insane shipping costs and decent customer support.
I’m absolutely drooling over that piece of beauty. My only issue with wgc that they dont do shipping to Ireland. 😢 Could you please recommend a shop that is willing to ship it?
Ordering from HongKong airsoft store is a bit of a mess, a lot of them seems to manage their orders and storage poorly. I ordered on last week from octagon airsoft and they end up shipping yesterday, which is the same day they told me they are still waiting for vfc’s supply to arrive. With that said I still recommend octagon airsoft as they are very responsive and willing to respond, which is very important when you consider nearly all store have such problems.
If you ordered from octagon airsoft, I’m afraid you are not going to get your airsoft rifle you ordered buddy. Octagon airsoft is a scam site. Always do research on reviews before ordering from anywhere. I’ve learned the hard way also.
I was going to get this but instead I went with the APS X1 Extreme gbbr. In my opinion it's really a game changer for GBBR. The X1 uses 90% aeg parts. It's also compatible with TM aeg parts as well, which means tons of customization. The internals are all steel which is a plus. The bolt carrier is steel reinforced. Even the trigger is steel. The mag runs both green gas and co2. You can actually drop the Gbox system into an compatible aeg m4 converting it to a gbbr if you wish. The only thing that might be a deal breaker for some is that the X1 is short stroked. It has great gas efficiency I usually get 60 shots off one co2 cartridge.
Hi there, if you're in the , k then try this store www.davescustomairsoft.co.uk/pre-order-due-late-march-2023-apfg-004bk-mcx-rattler-gbb-rifle-black-4-spare-magazines If you not or don't mind importing, then try this www.wgcshop.com/products/apfg-s-004bk Hope that helps
I’ve just ordered the gun on back order so will most likely take ages to arrive :/ I can’t see anywhere online what the recommended gas for the gun is! Please could you let me know what gas you use?
Mine is having a big bolt locking issue where after each shots it locks back, don't know if you have any similar problems. Keep reading online the opposite with people having their bolt not locking back when the mag is empty
Hi there, I haven't had any bolt lock issues, for it to lock on each shot sounds like a magazine follower issue, are you using v2 or v3 mags as if its v3 you can lock the follower down until it wears in. I'm currently 3k bbs in for the review so it sould be done soon.
@middle aged gamer: Nice video. I have quenstion: how do you that product come from VFC , except the mag ? I read some topic about APFG branch but nobody is sure its VFC too
Hi there, due to nobody but SIG Saur having a licence to their products, companies are finding ways of making what people want within the rules of law, even if it means pushing the rule of law as far as they can. For VFC, they have a track record of doing this, the unlicensed 1911, which after some legal stuff behind closed doors end with the securing the licence and it became the Kimber LAPD 1911. This time, they actually set up a subsidiary completely independent from them but totally dependent. The internals are 100% VFC, including the magazine. The rest is as many people say "an educated guess".
Can you tell me if the gun has 14mm ccw threading? I haven't been able to find out because I haven't seen someone else put a different suppressor/tracer unit
hi there the V# mags certainly are compatible with the 416 gbbr but the 416 do not fit the Rattler. when i finish the review i will add a demo of it for you.
Hi there, the muzzle device that comes with the Rattler is a 2-part device. The 3 prongs are screwed in cw to the base nut, the base is ccw, you will need to remove the 3 prongs first, and then the base to reveal 14mm ccw threads. I Hope that helps
Hi there, you will find most modern AR15 mags look the same, but as they say, "the devil is in the details." The minute differences in dimensions prevent the mags from seating correctly and obtaining a good seal, so yes, the bolt cycles but not as strong and by the 10th shot there's barely enough power to load another bb. With other mags (co2), I've found the valve to be releasing too much gas and damaging the rifle. I'm sure in time there will be upgrades to allow it to use ghk mags.
Hi there, yes, depending on the retailer, you put your UKARA number in the order comments section as you place the order. Some sites have a specific section for it. If you forget to, usually they will eventually ask you for it before shipping.
Hi there I gave the mags a once over and I cant see any problems, I will keep an eye out during my testing process and if there's ant issues I will include it in the review, hope that helps
Hi there thanks for the feedback, the main reason for Premiering the videos is to help this channel grow, I understand some people want to skip ahead to the parts there interested in, generally as soon as the video has aired its first playthrough your more than welcome to skip through. As always I will take the feedback and see what i can do for the future. Thanks!
I’m sorry you had such a difficult experience with Swit Airsoft. I didn’t had any issues when I ordered from them and as I got the in stock notification they got it to me within two weeks. I absolutely love the replica. Releasing the bolt is amazing. The gun is solid well built it just sucks that I wasn’t able to get it with trades like I did with the APFG MPX. Also just a side note: it’s funny you mentioned choosing between your new mcx and the hk416a5 as your primary. The 416 lower is compatible with the mcx upper. If you do like I did and get the picatinny stock adapter and use the same folding brace it turns into a hybrid of both a works just like the mcx spear with right side bolt release. It’s awesome and pretty cool seeing HK and Sig trades on the gun together
@@residentkat i am glad you had a better time with swit, as i said i was told i would be getting it early march but sadly i feel they just wanted a sale based on false promises. i heard about the compatibility with other AR lowers and may give it a go. i can definitely recommend action airsoft as they were cheaper and don't charge you until they actually have the item in stock and there postage was cheaper on top.
I’ve just ordered the gun on back order so will most likely take ages to arrive :/ I can’t see anywhere online what the recommended gas for the gun is! Please could you let me know what gas you use?
I’ve just ordered the gun on back order so will most likely take ages to arrive :/ I can’t see anywhere online what the recommended gas for the gun is! Please could you let me know what gas you use?
Airsoft Mike has already stopped recommending Swit a few years ago and mentioned so in the description of the older videos.
Always happy to see you unbox a new piece
Another great gun and video, when I ordered the VFC Carl Gustav it took 3 months and I only got confirmation on the 2nd month. Thankfully I got the beauty but I probably won't be ordering from swit again because of their insane shipping costs and decent customer support.
I’m absolutely drooling over that piece of beauty. My only issue with wgc that they dont do shipping to Ireland. 😢 Could you please recommend a shop that is willing to ship it?
Hi there have you tried www.proactstore.com there action airsoft where I got mine from. Hope that helps.
Ordering from HongKong airsoft store is a bit of a mess, a lot of them seems to manage their orders and storage poorly. I ordered on last week from octagon airsoft and they end up shipping yesterday, which is the same day they told me they are still waiting for vfc’s supply to arrive. With that said I still recommend octagon airsoft as they are very responsive and willing to respond, which is very important when you consider nearly all store have such problems.
If you ordered from octagon airsoft, I’m afraid you are not going to get your airsoft rifle you ordered buddy. Octagon airsoft is a scam site. Always do research on reviews before ordering from anywhere. I’ve learned the hard way also.
I was going to get this but instead I went with the APS X1 Extreme gbbr. In my opinion it's really a game changer for GBBR.
The X1 uses 90% aeg parts. It's also compatible with TM aeg parts as well, which means tons of customization.
The internals are all steel which is a plus. The bolt carrier is steel reinforced. Even the trigger is steel. The mag runs both green gas and co2.
You can actually drop the Gbox system into an compatible aeg m4 converting it to a gbbr if you wish. The only thing
that might be a deal breaker for some is that the X1 is short stroked. It has great gas efficiency I usually get 60 shots off one co2 cartridge.
That's awesome, if your in to hybrid guns check out G&G's upcoming drop in gbb box for any G&G AEG. Its currently slated for a 2023 release.
@@MiddleAgeGameruk Do you have a link or name of it? This is the first time ive seen anything on it.
Hi there, if you're in the , k then try this store www.davescustomairsoft.co.uk/pre-order-due-late-march-2023-apfg-004bk-mcx-rattler-gbb-rifle-black-4-spare-magazines
If you not or don't mind importing, then try this www.wgcshop.com/products/apfg-s-004bk
Hope that helps
Sweet! I don’t know if I regret getting the TM MP7 GBB 😅
There both amazing but having put rounds down range on the mcx rattler i am looking forward to finishing the review.
U DEFENETLY NOT, i have mine for almoust 2 years now and man, it rocks like crazy! if u use the right gas it will last a lot withouth any upgrade
I'm jealous😂 incredible my man
I need you be of theses in my life.
Beautiful piece
8:40 some might say, there's no rattle 👀
I'll see myself out
🤦haha!!!!
5:36 unboxing
Oowee that pew is beautiful
beautiful gun!
I’ve just ordered the gun on back order so will most likely take ages to arrive :/ I can’t see anywhere online what the recommended gas for the gun is! Please could you let me know what gas you use?
Cool cool cool 😉👌
Anyone in the US get one of these?
Mine is having a big bolt locking issue where after each shots it locks back, don't know if you have any similar problems. Keep reading online the opposite with people having their bolt not locking back when the mag is empty
Hi there, I haven't had any bolt lock issues, for it to lock on each shot sounds like a magazine follower issue, are you using v2 or v3 mags as if its v3 you can lock the follower down until it wears in. I'm currently 3k bbs in for the review so it sould be done soon.
@@MiddleAgeGameruk used both gen and the problem is the same and tried also your method. Contacted the shop where I ordered it to see what they can do
@middle aged gamer: Nice video. I have quenstion: how do you that product come from VFC , except the mag ?
I read some topic about APFG branch but nobody is sure its VFC too
Hi there, due to nobody but SIG Saur having a licence to their products, companies are finding ways of making what people want within the rules of law, even if it means pushing the rule of law as far as they can. For VFC, they have a track record of doing this, the unlicensed 1911, which after some legal stuff behind closed doors end with the securing the licence and it became the Kimber LAPD 1911. This time, they actually set up a subsidiary completely independent from them but totally dependent. The internals are 100% VFC, including the magazine. The rest is as many people say "an educated guess".
my mans is angry
Ahh yes the Sig MCX a very modular PDW......BUT! ☝🏼 It is as good as my JG H&K G36C with Tokyo Marui internals? 😎
Hi just want to ask if the supp is a power up?
Hi there, yes, the suppressor has an inner barrel extension to increase the fps.
Can you tell me if the gun has 14mm ccw threading? I haven't been able to find out because I haven't seen someone else put a different suppressor/tracer unit
Yes once you remove the sig qd flash hider its 14mm ccw
do you know if that v3 mag is compatible with the vfc 416?
hi there the V# mags certainly are compatible with the 416 gbbr but the 416 do not fit the Rattler. when i finish the review i will add a demo of it for you.
Hi i can remove the muzzle brake ?
Hi there, the muzzle device that comes with the Rattler is a 2-part device. The 3 prongs are screwed in cw to the base nut, the base is ccw, you will need to remove the 3 prongs first, and then the base to reveal 14mm ccw threads. I Hope that helps
Do you know if this is compatible with GHK PMAGS?
Hi there, sorry, but it's not compatible with GHK pmags.
@@MiddleAgeGameruk Really? the valve knocker, feed lips and gas port all look to be in the same place?
Hi there, you will find most modern AR15 mags look the same, but as they say, "the devil is in the details." The minute differences in dimensions prevent the mags from seating correctly and obtaining a good seal, so yes, the bolt cycles but not as strong and by the 10th shot there's barely enough power to load another bb. With other mags (co2), I've found the valve to be releasing too much gas and damaging the rifle. I'm sure in time there will be upgrades to allow it to use ghk mags.
It’s an all metal receiver right?
Hi there, yes, the receiver is full mettal.
@@MiddleAgeGameruk awesome!! Just wanted to make sure before buying one
Do you ukara to order from Hong-Kong
Hi there, yes, depending on the retailer, you put your UKARA number in the order comments section as you place the order. Some sites have a specific section for it. If you forget to, usually they will eventually ask you for it before shipping.
@@MiddleAgeGameruk oh great. That plan is out the window. I'm gonna ask if they accept justcos 🤣. I'm turning into a desperate collector.
Hi there, can u see if the gas sear on the mag are tearing?
Hi there I gave the mags a once over and I cant see any problems, I will keep an eye out during my testing process and if there's ant issues I will include it in the review, hope that helps
@@MiddleAgeGameruk just Sayd that because on the heavy recoil forum, someone report that issue!
I will definitely be keeping an eye out just incase, if there is any issue I will add it in my review.
Thomas Shirley Davis Sarah Hall Kenneth
Please don't ever post anymore vids in premiere
Hi there thanks for the feedback, the main reason for Premiering the videos is to help this channel grow, I understand some people want to skip ahead to the parts there interested in, generally as soon as the video has aired its first playthrough your more than welcome to skip through. As always I will take the feedback and see what i can do for the future. Thanks!
I find the premiere aspect pretty interesting I feel it creates some sort of anticipation.
Shut your filth box
I’m sorry you had such a difficult experience with Swit Airsoft. I didn’t had any issues when I ordered from them and as I got the in stock notification they got it to me within two weeks. I absolutely love the replica. Releasing the bolt is amazing. The gun is solid well built it just sucks that I wasn’t able to get it with trades like I did with the APFG MPX.
Also just a side note: it’s funny you mentioned choosing between your new mcx and the hk416a5 as your primary. The 416 lower is compatible with the mcx upper. If you do like I did and get the picatinny stock adapter and use the same folding brace it turns into a hybrid of both a works just like the mcx spear with right side bolt release. It’s awesome and pretty cool seeing HK and Sig trades on the gun together
@@residentkat i am glad you had a better time with swit, as i said i was told i would be getting it early march but sadly i feel they just wanted a sale based on false promises. i heard about the compatibility with other AR lowers and may give it a go. i can definitely recommend action airsoft as they were cheaper and don't charge you until they actually have the item in stock and there postage was cheaper on top.
Swit airsoft is a bad company
I’ve just ordered the gun on back order so will most likely take ages to arrive :/ I can’t see anywhere online what the recommended gas for the gun is! Please could you let me know what gas you use?
I’ve just ordered the gun on back order so will most likely take ages to arrive :/ I can’t see anywhere online what the recommended gas for the gun is! Please could you let me know what gas you use?
Hi there, I live in the uk, so I'm running green gas, Newprol 2.0. Hope that helps.