Suzuki Intruder VS1400: Headlight Removal - Tear Down Part 5
Vložit
- čas přidán 10. 12. 2019
- Suzuki Intruder "Tear Down" Part 3.
How to remove the Headlight of a Suzuki Intruder VS1400.
Today, the Suzuki VS1400 put us through our paces. I had to drill out both fixing screws for the headlight to get inside. I was then presented with a huge mess of wiring that I know is going to be a pain to put back together during the rebuild, BUT it is now done, removed from the bike so that we can move on.
Hagar Moto Website: For detailed, step-by-step instructions, visit:
bit.ly/3bdUWEp
Suzuki Intruder Workshop Manual:
Clymer Repair Manual Suzuki Intruder VS1400: amzn.to/3onx9FP
Popular Clutch Parts for Suzuki Intruder VS1400:
Full Clutch Kit by Barnett: amzn.to/3hMq1k1
Clutch Gasket by Caltric: amzn.to/3rUlrEZ
Clutch Friction Plates by Caltric: amzn.to/2Lrtsk0
Gasket and Friction Plate Kit by Caltric: amzn.to/2XeMvQW
Tapered Steering Stem Bearings by All Balls: amzn.to/38jGlWc
Popular Carburetor Parts for Suzuki Intruder VS1400:
Carburetor Rebuild Kit by KIPA: amzn.to/35bGWY7
Rear Diaphram Membrance by Lanbao: amzn.to/2MIDrCd
Popular Fuel System Parts for Suzuki Intruder VS1400:
Spark Plugs by NGK: amzn.to/38hsZtB
Iridium Spark Plug by NGK: amzn.to/2JQ3o1n
Pod Filters by DNA: amzn.to/3s1AA7u
Fuel Pump by Bruce & Shark: amzn.to/35dxG5S
Fuel Pump by OSIAS: amzn.to/2LrUc3T
Popular Brakes Parts FOR Suzuki Intruder:
Front and Rear Brake Pads by Master Chen: amzn.to/2JQlgJD
Popular Electrical System Parts for Suzuki Intruder VS1400:
Replacement Battery (YTX16-BS-1) by PowerStar: amzn.to/2XjjXWy
Popular Tools:
22 Litre Ultrasonic Cleaner: amzn.to/397dDXN
6.5 Litre Ultrasonic Cleaner: amzn.to/2MGCFpd
BelRay High-Quality Waterproof Grease: amzn.to/2LaLerV
Rotary Tool: amzn.to/2MGU9lh
Screw Driver Set: amzn.to/392Fato
If you have any questions, please leave them in the comment section below, hit subscribe and I'll get back to you asap.
_____________
This is the biggest project I have taken on, The bike will be completely stripped down to the frame, the engine will be removed for new piston rings to be installed, the wiring harness is going to be rewired and the entire bike overhauled, ready for spring 2020....I hope.
[***Disclaimer***]
Please keep in mind that I am not a mechanic, I have no professional training and the advice that may be interpreted from these videos is purely my own opinion and does not reflect that of which a professional mechanic or motorcycle engineer would provide.
-------
Motorcycle Specs:
Manufacturer: Suzuki
Model: Intruder VS1400
Year: 1997
Engine Size: 1360cc
Fuel Type: Petrol - Four Stroke
Cooling System: Air/Oil Cooled
Transmission: 5 Speed
-------
Camera Gear:
Sony A7iii
Interfit SuperLite 9
Neewer LED 660 Panel
Sennheiser MKE300 External Mic
#hagarmoto #suzukivs1400 #suzukiintruder - Auta a dopravní prostředky
Q&A -> Thanks for checking out the video, if you have any questions drop them here!
I need to get into the headlight to install diodes for the lights. Hope I am pleasantly surprised.
Thanks.
From brazil.✌🏻🇧🇷😎
Nice work, look forward to the follow-up. Thank you.
Do you have the video for put the headlight back
Everything thing is going well everything is powered coated I'll put some pics on soon as I figure out how lol
Are you going to do a video on lowering the back end and when you doing the competition for the fork covers
Good day I'm Eddy how did you mount your foot plates. I have a 2004 VS 1400 pls share a video
Would a burned out neutral light cause a open circuit on the 1400 intruder and not allow the starter solenoid to engage?. I've already bypassed the clutch and kickstand safety switches
Is this the same on the 800cc model.
Where did you get your floorboard? I can’t find one like that.
I have a FakeMaker on the way... interested in seeing what types of modifications I may need to make in order to install
Did you get the bowl with it or are you hoping to use the existing one???
Hagar Moto - Intruder Viking I hope to use the existing bowl... my challenge will be attaching the new light to the bowl securely.
Hagar Moto - Intruder Viking my bike is a vs800
So I’m looking at a bowl just in case I need one
Did i hear you say airhorn!? I'm very interested to see your install of this. I have spent countless hours trying to figure out where to stick everything
I have something special planned for this, all in good time brother.
Did you put a daymaker in the bike? Interested in a video if you do...
Hey rich thanks for your comment. I haven't started the rebuild quite yet, the tear down is very VERY nearly complete with the final 2 videos due this week. I WILL however be installing a FakeMaker of which I will have a video on during the rebuild series.
Is your headlight 7” out 5 3/4?
I have been trying and googling for hours myself. On eBay they offer two different sizes. I don't wanna have to get a new housing. But nobody will answer that question for some reason?
My headlight is 5 3/4 but I installed a whole new housing my friend with custom bracket to mount to the triple tree
@ do you have info on the parts? That my friend is my biggest problem,.
I went with the wismatic 5.75 and then found a retro mount to match
@ oh! And where did you get your floor boards
🎃