Some people never forget where they came from, and how they started. Thanks for the video and the great idea. Videos like this one is what made you a success.
PVC...the Big Kid's tinker toys!!! I make a firearms target stand out of PVC. Work well. Just make sure to fill the bottom with sand. I did the same thing to my kayak. I put a relief cut in the PVC prior to heating it. I also built a set of outriggers for fly fishing. I used the jumbo sized floaties for increased buoyancy. I also made a PVC frame for a mosquito net to go over my Army cot for when I am camping. Your beer bottle used to flare the rod holder? Genius!! Love your creative ways and thought process. Now go fishing and have some fun.
Nice job. I'm new to kayak fishing. At 64 it's never too late to get out with the boat or the new-to-me kayak. I'll be adding rod holders soon. Thanks for the creative ideas.
Really nice but simple. I'm going to make a couple for my Wilderness System Kayak. You are a true inspiration. Thanks for sharing your creative ideas in such a unique way ad usual.
awesome. Thanks for making this video. I just got my first yak, and I need to extend the rod holder as well. I already planned on using pvc. I wouldn't have thought to heat it up and shape it. cool man
This gives me a great idea! I always have a hard time reaching behind me for the rods, im going to try this but with a deeper angle towards the front to get them withing a comfortable reach :) "DIY and Beer are great" couldn't agree more! Good job on the vid, keep'm coming!
Great vid, and good ideas. I just purchased my first fishing yak and since I spent all my money on it, the paddle and a PFD...I need some cheap ideas to rig it better. This is definitely going to help. Thanks.
I don't know if your a genius or just cheap. Maybe a little of both I never knew you could manipulate PVC with heat that much. Using the beer bottle to flare the end was great. Love the giant tikis in the background. Thanks for sharing.
Hey this is a great video DIY, and like you, I use a lot of pvc pipe for everything and what i learned is if you heat the pipe up to much it becomes very flimsy witch makes it flex to much with force. so as a tip heat it up a little less and it will be more pliable. Also i use a heat gun and it doest leave those bad burn marks. Hope this will help.
Love these vids. You should have your own show on the Outdoor Channel. If nothing else, you should be a designer or consultant into development of angling kayaks.
Haha, awesome just the DIY project I was looking for Marty. I was about to go buy some rod holders for my new outback, not now this will do just fine and save me some Cha-Ching $$$!! Thanks great video!!
Fantastic sir! i originally went with the 1 1/4" wrapped with duct tape but this is much better! I just made mine and they are drying now. Thanks again for the great idea!
U DA MAN. Super vid Marty. F.Y.I. There is a tip for propane torches that spread the flame thereby making burning of the pvc less likely. Try it to avoid those burn spots. Keep them coming Marty.
You are going to love the PA it is a great Yak. I did cringe when you started to drill holes in it for the dolly bracket. lol Just found you site and subscribed. thanks
Marty you are freaking awesome we absolutely love your videos always relaxing always have something good to say even on the videos that you feel are not good dude they're great me my wife my two boys we love watching them keep it up please don't ever stop I'm not a fisherman I've never really enjoyed it however my boy loves it and so does my wife LOL looks like I might need to get into it watching your videos has inspired me to try from Mississippi we love you
Marty, check out 4:35, where you put the gas burner down... You came sooooo close to cooking your rod tip there buddy. Although I did notice after a little twisting and turning of your piece of pvc that the flame was out. Great video thanks mate. I shall be using the very same idea (courtesy of your good self) when I get my Hobie next spring. All the best and thanks again :)
you could attach the 1 1/2 PVC to a hand drill (make some kind of hub with a plumbers pressure test plug or something), get it spinning and apply the area needing to be reduced to a running belt sander......works pretty good at reducing diameters evenly.
Great programs here.I am a handicapped padler and use personal pontoon boat due to leg problems. Have you ever used one of these? If so Would greatly enjoy some modification tips..
Be careful using a open flame with PVC! I worked at a plastic fab shop for a couple years and I was told it gives off a toxic fumes! Plus your inside(no ventilation)! Just a friendly heads up! Love your videos! Keep doing your thing
That's why it is very important to drink beer while doing this. Beer washes down the toxins and then you peee the toxins out destroying the eco system.
Question Marty, Instead of using the angled coupling, couldn’t you heat up the pipe and put a little bend in it. I’ve seen people fill the pvc with sand before heating to prevent it from kinking. Just sayin’
When you said you were inspired by your beer I thought for sure we were going to see some foam beer bottle or tiki covers that surrounded your new rod holders.
Necessity is the mother of invention and the same applies to fishing. I like how the rod holders spread the rod tips. That can come in hand if you're doing some slow trolling.
Hi Marty, Really enjoy your videos. One thing to be careful of when applying flames to the PVC pipe. I know from personal experience that it can put off some really toxic fumes during the heating and especially if it starts to turn black or burn. Just don't want to lose one of my favorite You Tube movie makers. You are the Man! Thanks for all you nice videos. John
+helicopterjohns whenPVC = PolyVinyl Chloride is heated/burned it releases toxic hydrogen chloride gas, forming deadly hydrochloric acid. Dangerous especially in house/building fires. I agree: we don't want to lose you or anyone else!
Like ur videos, got a question for you, what fishing kayak would be best for me? My budget is under $500 and I need some weight capacity because I plan on installing my 46#thrust trolling motor w/battery and all my gear.
I don't think Marty is going to reply to you Sean but your best bet is to shop around on Facecrack Market-place or Craig's thingamajig. $500 is right at the bottom limit of what you will find with a used kayak. Kayaking has become very popular so that drives up the prices too on both used and new yaks. Hope you find what you are after! If you are on Facecrack Marty has a channel there too called "Love Kayak Fishing".
Some people never forget where they came from, and how they started. Thanks for the video and the great idea. Videos like this one is what made you a success.
Wow!!! 7 years!! I've been watching your videos for 6 years!!
This is why I love CZcams, because of guys like you, brilliant thinking my friend,
I'm glad to see I'm not the only one that brings his kayak in the dining room
PVC...the Big Kid's tinker toys!!! I make a firearms target stand out of PVC. Work well. Just make sure to fill the bottom with sand. I did the same thing to my kayak. I put a relief cut in the PVC prior to heating it. I also built a set of outriggers for fly fishing. I used the jumbo sized floaties for increased buoyancy. I also made a PVC frame for a mosquito net to go over my Army cot for when I am camping. Your beer bottle used to flare the rod holder? Genius!! Love your creative ways and thought process. Now go fishing and have some fun.
I love this guy. Doesn't settle to buy anything when you can DIY! Love all the ideas! DIY will always be in my mind for life! Good video marty!
Cheers Marty. Great creativity. Beer power=DIY projects.
Nice job. I'm new to kayak fishing. At 64 it's never too late to get out with the boat or the new-to-me kayak. I'll be adding rod holders soon. Thanks for the creative ideas.
Nothing like DIY and making my own gear. Always great tips my friend! Keep it up!
Really nice but simple. I'm going to make a couple for my Wilderness System Kayak. You are a true inspiration. Thanks for sharing your creative ideas in such a unique way ad usual.
Another great video Marty! The poor mans' ingenuity lives on!
I subscribed once he said kids and drunk people. This guy is a mad scientist.
Looks easy enough so I will certainly try this. Thanks for the great ideas.
Great idea, like the beer bottle trick. The best part about that trick is you get to empty the beer bottle first ! Keep-um coming, tight lines !
BOAB Sailing sent me! Glad we found you cause we need help when it comes to fishing. 😁👍
Excellent. Love to see people use creativity to improve things.
awesome. Thanks for making this video. I just got my first yak, and I need to extend the rod holder as well. I already planned on using pvc. I wouldn't have thought to heat it up and shape it. cool man
This gives me a great idea! I always have a hard time reaching behind me for the rods, im going to try this but with a deeper angle towards the front to get them withing a comfortable reach :) "DIY and Beer are great" couldn't agree more! Good job on the vid, keep'm coming!
Dude I love your videos! Always look foward to them specially since you live in the bay right down the road from the race track I go to
Give Marty a beer and stand back and watch him go . Love it . Great job 👏 👍 bro .
Great vid, and good ideas. I just purchased my first fishing yak and since I spent all my money on it, the paddle and a PFD...I need some cheap ideas to rig it better. This is definitely going to help. Thanks.
Cool bud, thanks for the ideas. I'm totally making those, and paintingbthem to match the boat
I'm going to the liquor store right now!
I don't know if your a genius or just cheap. Maybe a little of both I never knew you could manipulate PVC with heat that much. Using the beer bottle to flare the end was great. Love the giant tikis in the background. Thanks for sharing.
Marty,
Excellent. Great ideas!! Nothing like beer inspiration. :)
AWESOME WORK BRO, VERY CREATIVE!!!
You gave me great ideas!! Thank you!!
Wow! You are so right. Beer and DIY are good!
Hey this is a great video DIY, and like you, I use a lot of pvc pipe for everything and what i learned is if you heat the pipe up to much it becomes very flimsy witch makes it flex to much with force. so as a tip heat it up a little less and it will be more pliable. Also i use a heat gun and it doest leave those bad burn marks. Hope this will help.
Love these vids. You should have your own show on the Outdoor Channel. If nothing else, you should be a designer or consultant into development of angling kayaks.
Haha, awesome just the DIY project I was looking for Marty. I was about to go buy some rod holders for my new outback, not now this will do just fine and save me some Cha-Ching $$$!! Thanks great video!!
Fantastic sir! i originally went with the 1 1/4" wrapped with duct tape but this is much better! I just made mine and they are drying now. Thanks again for the great idea!
Nice DIY! Keep the vids coming!!!
Hobie should make a Pro Angler Marty Edition with all of your modifications stock ;) XD you and Hobie would make millions! Hahaha
Love your vids I live in Tampa and it looks like you go where I go sometimes
Good job Marty. Make sure to do a good stress test on the elbow joints. Love the video's.
DIY and beer is a good combo !
Wow, that's excellent. I cut groves in mine to make it fit, but this seems like a better way. Never thought to melt the pipe. Now paint them pink
Zoffinger...this is exactly the vid I needed today.
Thanks for you many instructive videos!
Love it -- have made these mods myself and more with your inspiration -- TY -- Keith
U DA MAN. Super vid Marty. F.Y.I. There is a tip for propane torches that spread the flame thereby making burning of the pvc less likely. Try it to avoid those burn spots. Keep them coming Marty.
You are going to love the PA it is a great Yak. I did cringe when you started to drill holes in it for the dolly bracket. lol Just found you site and subscribed. thanks
Fully agree...DIY and BEER is GREAT!!!
Okay, you are my new idol. So cool, thanks for sharing!
Well done Marty!
hey Marty, very good solution, simple is best.
Perfect! I was just looking for videos that would show how to curve the top.
Marty you are freaking awesome we absolutely love your videos always relaxing always have something good to say even on the videos that you feel are not good dude they're great me my wife my two boys we love watching them keep it up please don't ever stop I'm not a fisherman I've never really enjoyed it however my boy loves it and so does my wife LOL looks like I might need to get into it watching your videos has inspired me to try from Mississippi we love you
Love the videos all ways a good way to end the day
Ha! Enjoy the incorporation of the beer bottle on this mod. Nicely done, Marty. :)
A couple of 3 inch sections of bicycle inner tube work great to make for a good fit.
Looked great.
Thanks again for sharing, Awesome.
Another great idea... thanx for sharin
that was awosome! you r the Man!
Nice job ,I will be making some out of one inch for my smaller rods a kind of Taylor fit instead of one size fits all lol.
Nice mod! Though my poor right ear got lonely listening to this :D
I really thought you were going to make them look like beer bottles, or put a bottle opener on one. Nice job thank you for sharing.
thank you. I used this trick on my 2015 PA 14
Marty, check out 4:35, where you put the gas burner down...
You came sooooo close to cooking your rod tip there buddy. Although I did notice after a little twisting and turning of your piece of pvc that the flame was out. Great video thanks mate. I shall be using the very same idea (courtesy of your good self) when I get my Hobie next spring. All the best and thanks again :)
On my Ascend FS12T I sanded the PVC pipe and it removes very easily But I do appreciate all your videos
Súper!!! thanks for thank idea's !!!
I wanna be like you...!!! dude you got it down..if I was in the Kayak business you got a job brother..
you could attach the 1 1/2 PVC to a hand drill (make some kind of hub with a plumbers pressure test plug or something), get it spinning and apply the area needing to be reduced to a running belt sander......works pretty good at reducing diameters evenly.
Good Job !
Thanks for sharing !
as I start to mumble "this guy is a genius", camera pans to Albert Einstein. Great video!
Great programs here.I am a handicapped padler and use personal pontoon boat due to leg problems. Have you ever used one of these? If so Would greatly enjoy some modification tips..
i love ur vids
Excellent!
You have a matzuo rod! I love matzuo but is u put pressure on the side they snap pretty quick. But for 30$ a combo it's fine
Great stuff :)
Wy did u use the burner inside your house? Great video man huge fan
Love It , that is pretty sweet.....!
I am inspired my friend!
Was awesome
Be careful using a open flame with PVC! I worked at a plastic fab shop for a couple years and I was told it gives off a toxic fumes! Plus your inside(no ventilation)! Just a friendly heads up! Love your videos! Keep doing your thing
That's why it is very important to drink beer while doing this. Beer washes down the toxins and then you peee the toxins out destroying the eco system.
Question Marty,
Instead of using the angled coupling, couldn’t you heat up the pipe and put a little bend in it. I’ve seen people fill the pvc with sand before heating to prevent it from kinking.
Just sayin’
When you said you were inspired by your beer I thought for sure we were going to see some foam beer bottle or tiki covers that surrounded your new rod holders.
Spot on !!
lol. I made mine with the notch tight at the top so the stem of the reel has to snap in. It holds very well. No need for leashes
Necessity is the mother of invention and the same applies to fishing. I like how the rod holders spread the rod tips. That can come in hand if you're doing some slow trolling.
Hi Marty,
Really enjoy your videos. One thing to be careful of when applying flames to the PVC pipe. I know from personal experience that it can put off some really toxic fumes during the heating and especially if it starts to turn black or burn. Just don't want to lose one of my favorite You Tube movie makers. You are the Man! Thanks for all you nice videos.
John
+helicopterjohns whenPVC = PolyVinyl Chloride is heated/burned it releases toxic hydrogen chloride gas, forming deadly hydrochloric acid. Dangerous especially in house/building fires. I agree: we don't want to lose you or anyone else!
congratulations, officially beat the evil hobie corporation. nice vid I will put a pair on my hobie
Dude... there you are in your mancave.... doing what you want !
How could anyone be any richer ?
nicely done. the black paint makes them look stock
Marty I miss you please come back from Florida
Do you still use the reel you got from eposeidon? How about the fishing line? I just ordered some of their braid and was curious.
Love it.
Ever fish Marco ?
that totem is cool XD
I come up with my best ideas drinking beer
Hey Marty I would like to know if the Matzuo rod is good I am looking into getting one and would like to know thanks.
Like ur videos, got a question for you, what fishing kayak would be best for me? My budget is under $500 and I need some weight capacity because I plan on installing my 46#thrust trolling motor w/battery and all my gear.
I don't think Marty is going to reply to you Sean but your best bet is to shop around on Facecrack Market-place or Craig's thingamajig. $500 is right at the bottom limit of what you will find with a used kayak. Kayaking has become very popular so that drives up the prices too on both used and new yaks. Hope you find what you are after! If you are on Facecrack Marty has a channel there too called "Love Kayak Fishing".
Good to know we have the same chairs. hehehe
awesome beer man. doh i mean video
A heat gun works much better than a torch. More control and less discoloration.
1 1\4 slip should work also know as a coupling. You can grind the inside out with a dremel so u can use multiple.
1 1/4 “ pvc plus 2 O-rings works well also. John P
Mr kayak out of the box thinker.