Not a bad little squirreler at all at 40 yds. The trick is to dial in the scope for that specific distance, because the gun seems to perform better at that range than it does at shorter distances for some reason. (Sounds odd, but it’s true- at least, from my experience with it.)
I have an older version of that, but it does have the gas piston. I've had it about three years and it's been great, I really like the smoothness of the gas piston. I haven't had any trouble with it, still shoots great. I put a Simmons scope on it and it's providing excellent accuracy out to 30 yards and good accuracy to 50 yards. Just takes some practice to be consistent with it to get the best accuracy but that's typical for any break barrel I guess.
Light shoulder pressure and try the artillery hold with is resting the rifle on your palm flat and letting it recoil where it wants. Again, flat palm don’t grip the stock tight. You’ll get the hang of it... it’s almost everything opposite of shooting powder burner’s. It takes some time if you’re just jumping to high powered air rifles because shooters instinct makes you want to tuck that stock shoulder tight and grip the stock. Instead resting it flat on your palm or keep a VERY light grip helps. Every air rifle shoots different but I find the most important factor is finding the balance point on the forward stock and placing your hand in the same spot (non trigger finger) on the rifle everytime will give you dimes, especially from a rest. Every time I’m in Walmart I look for the Ruger impact Elite and it’s always out of stock. But I live in New York State and we have the strictest gun/knife laws it’s almost communist. I envy you southerners being able to carry pocket knives and such. Would be nice to get some land and setup a shooting range without close neighbors. Me and my dad have to drive almost 2 hours when small game season opens for public hunting however my cousin has land which is still 90min drive. Maybe you should do a follow up review after breaking it in and maybe getting a better scope! Them UTG scopes are the best bang for your buck... even at $100 it holds zero on my Hatsan 125 Vortex Camo in .22 which has the most powerful gas piston power plant in a break barrel air rifle period! It’s a beast cocking at 50/lbs compared to most breakers at around 30/lbs and it’s 10.5lbs scoped and at 48.5” in length it’s not great for offhand shooting. I carried that hunting for about 6-7/hours in the woods and my back was screaming the next day... but I’m 40 and getting old Lol. Nice video 👍 Edit: Also forgot to mention if you plan on using air rifles for hunting you might want to get a Chrony because a lot of these Walmart gas piston box rifles tend to leak gas due bad piston seals. Usually it’s because of a burr that snags the seal causing a slow leak over time. Hopefully you get lucky but you won’t know unless you Chrono the FPS at the muzzle. It’s a cheap fix if you have a clamp for the piston. If need be there are detailed videos on CZcams that explain the process
What do u recommend I do? I just bought this gun and it will not hold a group smaller than 8-10 inches, is there something I can do like shoot different pellets? I’m firing the ruger pellets atm???
The Ruger has a better fit and finish than the umarex airem 2....no hanging burrs on the sealing surfaces of the barrel break and a reasonable trigger pull that's almost smooth but not crisp. A slight step above the other cheap break barrel air rifles.....better than a sling shot : )
Just picked one up but the dang front site is tilted to the right..took the set screw out for the silencer but the damn thing Will NOT BUDGE😫 If you look from the front end (looking from muzzle to butt stock)the site looks like it is at the 55 minute or 11oclock position That is a Huge tilt...any ideas on how to twist the dang thing without snapping it?
i just got the crosman optimus in 22 caliber good little gun man i was lookingat that model but just the ruger air hawk i like springers though not nitro or gas piston guns no thanks
@@goodolboyzoutdoors841 to me ther junk but i don't mind other people haveing one im just not one time i had a springer anout 30 years old the spring was sacked i took a 70 cc dirt bike front forks of custom cut the spring inside and put it in that gun from a dirt bike and was getting 1300 fps didn't cost nothing to fix it that gun still shoots great to this very day lol you can never do anything like that with a gas piston gun or pcp but thats why i make seals out of leather for them to i can completely rebuild one for almost nothing hello
@@shaunaoneal5866 you'll need to tighten the screws on the stock after 20 shots or so, they come loose from the recoil, I put a little locktite on mine, cheaper guns do that after shooting them for a while
@@manbearpig2164 That's the first thing I did. I put blue loctite on them. I already had some because I work on vehicles for a living. I'm using my wife's profile, my name is Sawyer.
would you kindly take 10 minutes and remove the screws from your stock and see if the back of the scope mount is cracked on your rifle and post update... particularly the AFT trigger guard screw via nut and plastic base...thanks for your time
Umarex sucks boss. They really don't deal with the public. I had a bad experience with them after purchasing their product as well. I'll never give them my time and money ever again. Go with Hatsan,that's what I did or Gamo. Happy air gunning boss.Ed the professional backyard sniper man😎✌
@@goodolboyzoutdoors841 They're actually a flawed design that umarex and impact max elit.. the stock bolts come loose after a few shots! Even after break in.I gave up on it and bought a good break barrel in a weihrauch. Also Hatsan is better. I have many many break barrels one of the largest collections in the United States,and pcp's, antique and current.from 17cal to the notorious 20mm! I own a chrony and a 25 yard indoor range. Also I'm a retired gunsmith.I think I know what I'm talking about on here!
@@eddiecahall3824 I hear ya but that's your opinion and I got a good one so far that's why I test them so much and yes I agree with you they are not made as good as others but you also pay for what you get and on top of that grew up with a gun in my hand for one and at 18 I thought my own self how to work on guns no body though me i am a 3 generation mechanic and fixing and building things is in my blood that's the way I have always been but any way you have a blessed day
@@goodolboyzoutdoors841I'm late to your comment I missed...but anyways... well, you have fun fun working on the pos's. As for me...I've moved on to bigger and way better stuff. Hope you wise up an do the same bud! Ed the professional backyard sniper man😂 it's not my opinion, it's a fact and a reality with hundreds of hrs of testing and over 45 yrs experience!
Keep in mind the scope they come with are trash... DEFINITELY upgrade the scope! I got a UTG 3x9-40 AO th on my Hatsan 125 and it’s night and day difference
Nope I am from texas and we are some good ol boyz down here we look out for each other like we are supposed to and like back in my grandparents days where if your kid is at my house or with me and my family that are our kid and we look out for one another and help each other like ppl are supposed to do
@@goodolboyzoutdoors841 what part of texas i worked iron work in waxahatchy texas to in the 90s we stayed a bear creek i think it was a camp ground while building that factory i worked for casey back then i been a iron worker and born in paint and body to and build harleys to we own a mco biker club called the dixie iron horse here in holmes county city of bonifay to lol but im a custom knife builder and build vintage air rifles and have for over 40 years really lol
I had the same issue with mine couldn’t hit the side of the barn? It’s not my first rifle I should’ve been able to hit something so try to go to the same process and of course stuck with a gun no matter how much I adjusted the scope sites etc. it just always drop shot super low any tips?
did you cleaned the bore out you know they have oil in them witch makes them shoot hi i cleaned mine out and its on sight and stayed on sight also make sure all the scope mounts are tight
Mine only likes certain pellets. I shoot all non-lead. It likes the GTO and the Sig, but not the HN Baracuda Green. Still testing the Crosman Red Flight -- they hit hard but I think less accurate.
It can take up to 500 rounds to break in and season the barrel. Every breaker air rifle has a break in period. But most importantly, the included stock scopes are terrible and will almost always having you adjusting your zero. It might hold for 10-50 shots hitting dime groups but then your groups will jump like popcorn. The good thing is this rifle comes with nice weaver rails so I would recommend upgrading the scope to a UTG BugBuster if you can afford the $100 it’s absolutely worth it. That scope will outlast the rifle most likely and the glass is fantastic for the price. Once I upgraded the scope off my Gamo Swarm, Benjamin Prowler and Hatsan 125 Vortex all in .22 I literally shot a dime at 23yds on my first shot and recorded it on my phone in my backyard. Two things when shooting break barrels are important... the “Artillery Hold” which you can lookup and consistent trigger control is crucial! Use the middle part of the pad of your trigger finger (not the crook where the first joint bends) and once your trigger breaks in it will get easier when you know exactly where it breaks and releases the sear. Practicing is obviously your friend but more so is helping to break in the rifle’s trigger and seasoning the barrel. You don’t need to clean the barrel unless you notice accuracy issues and groups won’t hold anymore. In that case using Ballistol to clean the barrel will help (don’t use Hoppes #9 it will damage your breach seal o-ring) clean out caked lead that can build up and negate your rifling in the barrel but most air rifles self clean with each pellet pushing out lead dust from the previous. Your groups should get noticeably better on a new rifle and if after 500 through the pipe it’s still not grouping (assuming you’ve upgraded the scope because it’s necessary to hold a consistent zero) then it could be a gas piston leak on the seal. A Chrony would help isolate the problem, you can see if the FPS drops off drastically. It will over time a very little which is normal when breaking it in because all Walmart rifles will Diesel when you first get them because of the oils that are put in the piston assembly from China. These will naturally burn out from shooting. You probably have noticed the smell and seen smoke coming from the breach when loading a new pellet after firing. That is the oils combusting which will make the rifle temporarily shoot a little faster during the break in period but will go away after 50-500. Good luck 👍
i honestly like the prowler more but it has not been shooting right no matter what i do it keeps shooting all over the place i made sure all my screws are tight and cleaned the barrel and did everything i can think of even tried new ammo so as of right now the ruger is my new favorite
@@dustinh4175 i checked all that everything is tight but i am going to buy a new scope soon and see if that's the problem just don't know what scope to go with in my price range
@@goodolboyzoutdoors841 you should disassemble it and check the piston bore for scoring. The piston seal is probably wasted. My F4 has that problem. It's the same platform you know. How was the weather there where you are at? Hope you are doing well.
I put a Simmons scope on mine three years ago, and it's still holding up fine. Might try one, it seems to be a good quality scope that can handle the recoil.
Im looking at this exact rifle vs a Gamo .22 Air. I want to be able to hunt with it nothing crazy..wild turkey small hogs iv seen the Gamo take em down does this have enough to drop something or is it more of a target gun?
@@bl4ze600 I couldn't resist I brought one home .22 Ruger impact max Elite. Feels amazing. These aren't your granddads daisy. These feel like a real .22 LR shot it 3 times just to feel it very impressed with its kick for a airgun. Group was less than an inch at only 25 yards with just the sights no scope. Cant wait to dial it in and bag some wild turkey.
it's a bit rough at first, but don't give up on it. Shoot it a while and the trigger will get much better and smooth out. It's got a crisp break, which is nice.
You can get the gamo swarm whisper for the same money it’s a far better rifle. I bought the ruger first and if I had bought the gamo first I wouldn’t have got the ruger.
thats about as good as they get for a regular break barrel. If you can get an RWS 34 in 22 which isnt much more money you can drive groups into a dime easily at 35yds.
@@goodolboyzoutdoors841 excellent man. Yes I don't do much reviews . But I do buy quite a bit of stuff. You can check my channel . I've got different stuff on there.
@@goodolboyzoutdoors841 lol....dude....I.dont want to get in an argument...but get a measuring tape.....or a range finder.....what ure saying means one of your strides is 30/18=1.66 yards or 5 feet.....lol
Ok so excit me from what gogle says is 12 foot steps is 10 yards so I did 15 foot steps but do you buddy i am not going to argue with you over a range taht I am shooting at your not her to veryfiy so thats yoir option and I am being hounst with everyone on what i do I am sorry that you have a disengagement but that's you I know what it ia and if you don't like it I don't know what to tell you but watch someone's else's video you don't have to watch mine have a wonderful and blessed evening
I bought on last year... cant hit a plate at 30 yards.....its junk.. wasted my money...I thought being it had a ruger name it would be better made ..better accurate.....I was wrong....
Don't grip with your hand and leave butt of rifle off your shoulder and you will get alot more accurate, it's the piston that makes ppl shoot everywhere, it goes back and forward with recoil and that's before pellet ever leaves the barrel, break barrels are different than air pump or air can
Trust me man, it's him, not the rifle. I have one of those rifles and it is VERY accurate. It's just that some people are accurate shooters and some need a little more practice, that's all. It's a good low cost rifle, it really is.
Not a bad little squirreler at all at 40 yds. The trick is to dial in the scope for that specific distance, because the gun seems to perform better at that range than it does at shorter distances for some reason. (Sounds odd, but it’s true- at least, from my experience with it.)
Good input regarding the pellet pen. Missed that detail previously.
Hi Sir !!! I have one, is so good, so Amazing,thanks for Sharing this video...God Bless you and all your family too...thanks againg ...
.22 Ruger love it since I put a real scope on it
I have an older version of that, but it does have the gas piston. I've had it about three years and it's been great, I really like the smoothness of the gas piston. I haven't had any trouble with it, still shoots great. I put a Simmons scope on it and it's providing excellent accuracy out to 30 yards and good accuracy to 50 yards. Just takes some practice to be consistent with it to get the best accuracy but that's typical for any break barrel I guess.
Is it the Ruger impact Max I got the 22 cal
This bad boy has great power & pretty damn accurate for 160$
Yeah it's actually a really nice rifle for the price. I bought one two years ago and it's great, very accurate and lots of punch.
@@trevorjameson3213 i got a question about how long is the pellet rifle? Please respond
I got small hands but the grip and forestock feel comfortable to hold. Perfect fit for me personally.
Light shoulder pressure and try the artillery hold with is resting the rifle on your palm flat and letting it recoil where it wants. Again, flat palm don’t grip the stock tight. You’ll get the hang of it... it’s almost everything opposite of shooting powder burner’s. It takes some time if you’re just jumping to high powered air rifles because shooters instinct makes you want to tuck that stock shoulder tight and grip the stock. Instead resting it flat on your palm or keep a VERY light grip helps. Every air rifle shoots different but I find the most important factor is finding the balance point on the forward stock and placing your hand in the same spot (non trigger finger) on the rifle everytime will give you dimes, especially from a rest. Every time I’m in Walmart I look for the Ruger impact Elite and it’s always out of stock. But I live in New York State and we have the strictest gun/knife laws it’s almost communist. I envy you southerners being able to carry pocket knives and such. Would be nice to get some land and setup a shooting range without close neighbors. Me and my dad have to drive almost 2 hours when small game season opens for public hunting however my cousin has land which is still 90min drive. Maybe you should do a follow up review after breaking it in and maybe getting a better scope! Them UTG scopes are the best bang for your buck... even at $100 it holds zero on my Hatsan 125 Vortex Camo in .22 which has the most powerful gas piston power plant in a break barrel air rifle period! It’s a beast cocking at 50/lbs compared to most breakers at around 30/lbs and it’s 10.5lbs scoped and at 48.5” in length it’s not great for offhand shooting. I carried that hunting for about 6-7/hours in the woods and my back was screaming the next day... but I’m 40 and getting old Lol. Nice video 👍
Edit: Also forgot to mention if you plan on using air rifles for hunting you might want to get a Chrony because a lot of these Walmart gas piston box rifles tend to leak gas due bad piston seals. Usually it’s because of a burr that snags the seal causing a slow leak over time. Hopefully you get lucky but you won’t know unless you Chrono the FPS at the muzzle. It’s a cheap fix if you have a clamp for the piston. If need be there are detailed videos on CZcams that explain the process
I bought one and modified mine with a picatinny rail with bipod.
Lol you said insert lol that was cool 😎
good shooting bud yeh
It's about time you posted it's me Bella kasprzak
yes i know i am going to start making more videos
What do u recommend I do? I just bought this gun and it will not hold a group smaller than 8-10 inches, is there something I can do like shoot different pellets? I’m firing the ruger pellets atm???
Nice gun
The Ruger has a better fit and finish than the umarex airem 2....no hanging burrs on the sealing surfaces of the barrel break and a reasonable trigger pull that's almost smooth but not crisp.
A slight step above the other cheap break barrel air rifles.....better than a sling shot : )
Just picked one up but the dang front site is tilted to the right..took the set screw out for the silencer but the damn thing Will NOT BUDGE😫 If you look from the front end (looking from muzzle to butt stock)the site looks like it is at the 55 minute or 11oclock position That is a Huge tilt...any ideas on how to twist the dang thing without snapping it?
I had to chisel that silencer off. That set screw doesn’t do crap.
Mine is getting good groups.
You have to readjust the scope every 100 shots.
Really I haven't had any problems like that yet what ammo are you using?
One thing I do know and can tell you is recheck the scope mounts make sure everything is tight because they do get loose
Use the scope stop allen screw in the mount. Use blue loctite. CZcams "Artillery Hold".
Did you have problems after 10 shots
i just got the crosman optimus in 22 caliber good little gun man i was lookingat that model but just the ruger air hawk i like springers though not nitro or gas piston guns no thanks
Why don't you like the gas or nitro piston?
@@goodolboyzoutdoors841 to me ther junk but i don't mind other people haveing one im just not one time i had a springer anout 30 years old the spring was sacked i took a 70 cc dirt bike front forks of custom cut the spring inside and put it in that gun from a dirt bike and was getting 1300 fps didn't cost nothing to fix it that gun still shoots great to this very day lol you can never do anything like that with a gas piston gun or pcp but thats why i make seals out of leather for them to i can completely rebuild one for almost nothing hello
I got the same one, but I put a 400 dollar scope on it, shoots great, hits hard
Nice. I'm about to put a Leopold scope on mine. I just got mine 2 days ago, but haven't shot it much due to rain.
@@shaunaoneal5866 you'll need to tighten the screws on the stock after 20 shots or so, they come loose from the recoil, I put a little locktite on mine, cheaper guns do that after shooting them for a while
@@manbearpig2164 That's the first thing I did. I put blue loctite on them. I already had some because I work on vehicles for a living. I'm using my wife's profile, my name is Sawyer.
Was you able to finally figure out the iron sights after a while. Like learn the compensations and all that?
No not yet I just put the scope on and left it on I shoot far anyway so the scope was and is the best for me and what I use it for
would you kindly take 10 minutes and remove the screws from your stock and see if the back of the scope mount is cracked on your rifle and post update... particularly the AFT trigger guard screw via nut and plastic base...thanks for your time
Me too
Umarex sucks boss. They really don't deal with the public. I had a bad experience with them after purchasing their product as well. I'll never give them my time and money ever again. Go with Hatsan,that's what I did or Gamo. Happy air gunning boss.Ed the professional backyard sniper man😎✌
Dude I had the same experience with them but after shooting this one I love it the air rifle is good too me just the stupid ppl who makes them are pos
@@goodolboyzoutdoors841 They're actually a flawed design that umarex and impact max elit.. the stock bolts come loose after a few shots! Even after break in.I gave up on it and bought a good break barrel in a weihrauch. Also Hatsan is better. I have many many break barrels one of the largest collections in the United States,and pcp's, antique and current.from 17cal to the notorious 20mm! I own a chrony and a 25 yard indoor range. Also I'm a retired gunsmith.I think I know what I'm talking about on here!
@@eddiecahall3824 I hear ya but that's your opinion and I got a good one so far that's why I test them so much and yes I agree with you they are not made as good as others but you also pay for what you get and on top of that grew up with a gun in my hand for one and at 18 I thought my own self how to work on guns no body though me i am a 3 generation mechanic and fixing and building things is in my blood that's the way I have always been but any way you have a blessed day
@@goodolboyzoutdoors841I'm late to your comment I missed...but anyways... well, you have fun fun working on the pos's. As for me...I've moved on to bigger and way better stuff. Hope you wise up an do the same bud! Ed the professional backyard sniper man😂 it's not my opinion, it's a fact and a reality with hundreds of hrs of testing and over 45 yrs experience!
@@pigman571 So you're saying this break barrel by Umarex ruger shoots as good or better than a pcp air rifle? Dream on...it barely shot at 20 yards
if ya carnt hit the spot free hand, ya carnt shoot at all.
Keep in mind the scope they come with are trash... DEFINITELY upgrade the scope! I got a UTG 3x9-40 AO th on my Hatsan 125 and it’s night and day difference
Should have asked the manufacturer to replace the rifle might have had better results.
He did, they said they can't because he didn't buy it directly from them.
were is goodol boy from florida im from holmes county florida and dale county alabama lollol you sound like some of my people bud lol lol
Nope I am from texas and we are some good ol boyz down here we look out for each other like we are supposed to and like back in my grandparents days where if your kid is at my house or with me and my family that are our kid and we look out for one another and help each other like ppl are supposed to do
@@goodolboyzoutdoors841 what part of texas i worked iron work in waxahatchy texas to in the 90s we stayed a bear creek i think it was a camp ground while building that factory i worked for casey back then i been a iron worker and born in paint and body to and build harleys to we own a mco biker club called the dixie iron horse here in holmes county city of bonifay to lol but im a custom knife builder and build vintage air rifles and have for over 40 years really lol
keep making vids bro.. Maybe use a tripod ?
Yes I do need to get one I just got a new camera to so new videos coming soon
Haha !
😎
I had the same issue with mine couldn’t hit the side of the barn? It’s not my first rifle I should’ve been able to hit something so try to go to the same process and of course stuck with a gun no matter how much I adjusted the scope sites etc. it just always drop shot super low any tips?
did you cleaned the bore out you know they have oil in them witch makes them shoot hi i cleaned mine out and its on sight and stayed on sight also make sure all the scope mounts are tight
@@goodolboyzoutdoors841 on it.
Mine only likes certain pellets. I shoot all non-lead. It likes the GTO and the Sig, but not the HN Baracuda Green. Still testing the Crosman Red Flight -- they hit hard but I think less accurate.
It can take up to 500 rounds to break in and season the barrel. Every breaker air rifle has a break in period. But most importantly, the included stock scopes are terrible and will almost always having you adjusting your zero. It might hold for 10-50 shots hitting dime groups but then your groups will jump like popcorn. The good thing is this rifle comes with nice weaver rails so I would recommend upgrading the scope to a UTG BugBuster if you can afford the $100 it’s absolutely worth it. That scope will outlast the rifle most likely and the glass is fantastic for the price. Once I upgraded the scope off my Gamo Swarm, Benjamin Prowler and Hatsan 125 Vortex all in .22 I literally shot a dime at 23yds on my first shot and recorded it on my phone in my backyard. Two things when shooting break barrels are important... the “Artillery Hold” which you can lookup and consistent trigger control is crucial! Use the middle part of the pad of your trigger finger (not the crook where the first joint bends) and once your trigger breaks in it will get easier when you know exactly where it breaks and releases the sear. Practicing is obviously your friend but more so is helping to break in the rifle’s trigger and seasoning the barrel. You don’t need to clean the barrel unless you notice accuracy issues and groups won’t hold anymore. In that case using Ballistol to clean the barrel will help (don’t use Hoppes #9 it will damage your breach seal o-ring) clean out caked lead that can build up and negate your rifling in the barrel but most air rifles self clean with each pellet pushing out lead dust from the previous. Your groups should get noticeably better on a new rifle and if after 500 through the pipe it’s still not grouping (assuming you’ve upgraded the scope because it’s necessary to hold a consistent zero) then it could be a gas piston leak on the seal. A Chrony would help isolate the problem, you can see if the FPS drops off drastically. It will over time a very little which is normal when breaking it in because all Walmart rifles will Diesel when you first get them because of the oils that are put in the piston assembly from China. These will naturally burn out from shooting. You probably have noticed the smell and seen smoke coming from the breach when loading a new pellet after firing. That is the oils combusting which will make the rifle temporarily shoot a little faster during the break in period but will go away after 50-500. Good luck 👍
What is the largest animal u have taken with this gun?
I haven't taken anything yet waiting for squirrel season to come back
What do you like better the ruger or the prowler?
i honestly like the prowler more but it has not been shooting right no matter what i do it keeps shooting all over the place i made sure all my screws are tight and cleaned the barrel and did everything i can think of even tried new ammo so as of right now the ruger is my new favorite
@@goodolboyzoutdoors841 scope maybe?
@@dustinh4175 i checked all that everything is tight but i am going to buy a new scope soon and see if that's the problem just don't know what scope to go with in my price range
@@goodolboyzoutdoors841 you should disassemble it and check the piston bore for scoring. The piston seal is probably wasted. My F4 has that problem. It's the same platform you know. How was the weather there where you are at? Hope you are doing well.
I have the same gun and it shoots a dime size target at 50 yards with a good scope.
Change the scope mine destroyed the scope now I use the open sights
I put a Simmons scope on mine three years ago, and it's still holding up fine. Might try one, it seems to be a good quality scope that can handle the recoil.
Just got this gun from my dad is it good for squirrel hunting
I haven't used mine for hunting yet but as soon as squirrel season starts I will
Im looking at this exact rifle vs a Gamo .22 Air. I want to be able to hunt with it nothing crazy..wild turkey small hogs iv seen the Gamo take em down does this have enough to drop something or is it more of a target gun?
@@SmithWesson90 yes most defintly
Yes most defintly I’ve seen videos of it killing hogs and turkey
@@bl4ze600 I couldn't resist I brought one home .22 Ruger impact max Elite. Feels amazing. These aren't your granddads daisy. These feel like a real .22 LR shot it 3 times just to feel it very impressed with its kick for a airgun. Group was less than an inch at only 25 yards with just the sights no scope. Cant wait to dial it in and bag some wild turkey.
How is the trigger, many reviewers don't care for it?
Honestly I love the trigger I haven't made no adjustments at all I love it the way it is its smooth crisp and clean
The old original impact had the t5 clone which was pretty sweet
It was a bit rough at first but now it feels smooth. It is a bit stiff. Good for learning proper trigger technique I reckon.
@@goodolboyzoutdoors841 how many rounds you got through her? Also, Is it the gas piston or spring?
it's a bit rough at first, but don't give up on it. Shoot it a while and the trigger will get much better and smooth out. It's got a crisp break, which is nice.
Iv brought back 5 or 6 air rifles to wal mart
Buyer be aware....always do your homework...the riffle for the price is deal..
I want to buy if was a .22 air rifle
It is a 22 cal air rifle
What's the fps I gotta get me one
Realistic FPS per chronograph with 14.3 grain lead pellets is around 730, more or less, it varies a little bit.
You can get the gamo swarm whisper for the same money it’s a far better rifle. I bought the ruger first and if I had bought the gamo first I wouldn’t have got the ruger.
thats about as good as they get for a regular break barrel. If you can get an RWS 34 in 22 which isnt much more money you can drive groups into a dime easily at 35yds.
That's going to be my next review I am looking to buy one I do all my review out of my own pocket
@@goodolboyzoutdoors841 excellent man. Yes I don't do much reviews . But I do buy quite a bit of stuff. You can check my channel . I've got different stuff on there.
Dude.....I counted 18 strides......how is that 32 yards.......cummon man....seriously?
I do foot for foor a total of 15 ft is 10 yards so 45 ft is 30 yards
@@goodolboyzoutdoors841 lol....dude....I.dont want to get in an argument...but get a measuring tape.....or a range finder.....what ure saying means one of your strides is 30/18=1.66 yards or 5 feet.....lol
Ok so excit me from what gogle says is 12 foot steps is 10 yards so I did 15 foot steps but do you buddy i am not going to argue with you over a range taht I am shooting at your not her to veryfiy so thats yoir option and I am being hounst with everyone on what i do I am sorry that you have a disengagement but that's you I know what it ia and if you don't like it I don't know what to tell you but watch someone's else's video you don't have to watch mine have a wonderful and blessed evening
Very unsafe target set
How is it unsafe because i am facing the woods
I bought on last year... cant hit a plate at 30 yards.....its junk.. wasted my money...I thought being it had a ruger name it would be better made ..better accurate.....I was wrong....
Don't grip with your hand and leave butt of rifle off your shoulder and you will get alot more accurate, it's the piston that makes ppl shoot everywhere, it goes back and forward with recoil and that's before pellet ever leaves the barrel, break barrels are different than air pump or air can
Seems extremely inaccurate!
Trust me man, it's him, not the rifle. I have one of those rifles and it is VERY accurate. It's just that some people are accurate shooters and some need a little more practice, that's all. It's a good low cost rifle, it really is.
Umarex sucks not giving up money back I will not buy from them
About as comfortable as holding a 2x4