Range rover TDI swap: Engine refresh
Vložit
- čas přidán 27. 08. 2024
- The motor was in need of some cleaning and replacing of parts. Let's get it ready for it's second life!
If you want to support the channel, here are some affiliate links to the tools I use!
Milwaukee impact gun: amzn.to/3e7rNLR
Milwaukee batteries: amzn.to/3hXJte7
Plasma cutter: amzn.to/3ra6X3J
Plasma cutter tips: amzn.to/3hXAHg6
grinder: amzn.to/36tLw49
battery Grinder: amzn.to/3hVP4l3
C clamp: amzn.to/3AUvmP6
Coveralls: amzn.to/3wwGQ8b
Channel locks: amzn.to/3kkWgdt
socket set: amzn.to/3hX5bim
breaker bar: amzn.to/3hwo7oU
deep impact sockets: amzn.to/3r16BMR
short impact sockets: amzn.to/2UFLEL6
extensions: amzn.to/3htxTIt
Should have painted Mike on the timing cover
Coming along nicely Ludi. Good to have a refreshed engine going back in, especially after all the hard work you’ve already done. Looking forward to hearing her start up.
Cheers. 😊👍🏻
haha me too! it should motivate me to finish the project haha..
The rust isnt any better over here in Norway :P
Thats too bad! It usually makes any easy job a pain.
When I heard a TA BAR NAK man!! I knew right away que je pourrais te demander... Tes de où exactement? Je m'apprête à faire le même swap sur mon 3rd gen 4runner. 2.0 de passat par contre.
Sherbrooke! Ça va être incroyable comme truck un 4 runner diesel 😀!
@@ludwigseeley6359 Tu me niaise!? Je suis de Sherbrooke aussi haha. Lennox pour être plus précis. Oui, ce devrait être assez intéressant comme véhicule. Je crois que je viens de trouver un pas pire deal. 2000$ passat tdi 2005 fonctionnelle. Mais ton rover c'est assez hot aussi.
@@alexlongpre4527 haha trop drole! en effet un petit passat tdi sera un bon char le fun!
thanks for uploading this....
Extra 30 hp gained with yellow paint at least! Cest parfait tres beujollie magnifeque! Lol I tried! Ferme les yeux zap! ouvret lesyeux, I've welded lots of things using this method!
Hahah yeah when you donc feel like getting the welding helmet! And yeah 30hp minimum ;)
@@ludwigseeley6359 bike innertubes cut down in width and laced in a bar pattern, when all your boot laces have melted from grinding on the floor! Sanding discs are not very flexible for wrapping around Dowling:) Great looking engine!
@@ludwigseeley6359 I've had two welding helmets, both had dead batteries by the time I needed them so I end up welding in short runs with my eyes closed most of the time!
Looking good, find a 3.5 V8 for that 2 door and it will be worth a fair bit, is it 200 or 300 tdi ?
That engine isn't a Land Rover unit, at a guess I think it's a VW/Audi engine. If it under 2.5L then it will be seriously under powered.
@@danloosmore8099 I meant the one in the 2door in the background.
It's the opposite in North america, we have plenty of V8's so the diesels are more saught after.. (300tdi)
@@ludwigseeley6359 hey, so what engine is it?
@@danloosmore8099 1.9 tdi from a Jetta