Learn how to use a Multimeter - for solar power, DIY and more!

SdĂ­let
VloĆŸit
  • čas pƙidĂĄn 20. 11. 2022
  • Here I will explain and teach how to use a Digital Multimeter (DMM) for beginners up to intermediate / advanced. If you already know some basics, this training could still be helpful as it will cover some higher level topics. 🟱 PART 2 ‱ How to Check Your Inve...
    This guide takes you through many key details of a typical digital multimeter, with an eye towards solar energy applications but also other disciplines. Any DIY enthusiast can benefit from knowing how to use a standard digital multimeter.
    Learn how to take basic measurements with a digital multimeter, then go beyond and apply that knowledge to real-world systems. Basic safety is also covered. Hope this video helps someone - thanks for watching!
    #multimeter #solar #solarelectric #solarelectricity #diy
  • Věda a technologie

Komentáƙe • 25

  • @piano40s
    @piano40s Pƙed 5 dny +1

    Thank you so much for your clear description I finally understand how to read Amp readings other videos have left me baffled with there description.

    • @solarpoweredge
      @solarpoweredge  Pƙed 5 dny

      @piano40s You are most welcome, I'm so glad to hear that :) I try very hard to make things clear but still deliver value. I too have been baffled by some of the stuff on yt :D

  • @konkaragounakis5924
    @konkaragounakis5924 Pƙed 15 dny

    Excellent presentation. Finally, someone explained what hertz is, I learnt so much from this episode. Thanks.

    • @solarpoweredge
      @solarpoweredge  Pƙed 15 dny +1

      @konkaragounakis5924 Welcome! thank you for the good feedback, glad to hear it :)

  • @tdknucklehead9416
    @tdknucklehead9416 Pƙed 4 měsĂ­ci +1

    This was very helpful. This whole topic of volts, amps and watts is always confusing to me and you’ve helped clear it up. Thanks for taking the time to explain it all.

    • @solarpoweredge
      @solarpoweredge  Pƙed 4 měsĂ­ci

      @tdknucklehead9416 Excellent... and welcome :) glad I could help!!

  • @uncouthboy8028
    @uncouthboy8028 Pƙed 6 měsĂ­ci +1

    Excellent video, thank you for taking the time to make it.

  • @PlayfulNikki
    @PlayfulNikki Pƙed 2 měsĂ­ci +1

    Thank you for this video. It'll prove very helpful.

  • @kwameashigbui9596
    @kwameashigbui9596 Pƙed měsĂ­cem +1

    Thank you for this am grateful to meet you

    • @solarpoweredge
      @solarpoweredge  Pƙed měsĂ­cem

      @kwameashigbui9596 Welcome sir, good to meet you

    • @kwameashigbui9596
      @kwameashigbui9596 Pƙed měsĂ­cem +1

      @@solarpoweredge Please you can send me some links to follow,
      Because I need to learn more about my work, am a rewinder

    • @solarpoweredge
      @solarpoweredge  Pƙed měsĂ­cem

      @kwameashigbui9596 Rewinding motors and coils can be challenging... you have very interesting work.
      Primarily I'd learn about Inductors, Transformers and especially Ohms Law (resistance calculations).
      Here are several items to look at for further information. I hope they can be of some assistance to you. Best wishes
      www.khanacademy.org/science/physics/circuits-topic/circuits-resistance/v/circuits-part-1?Grant&DSA_www_US_lowincomestates&gad_source=1&gclid=EAIaIQobChMI4Yn6pozWhgMVMC7UAR0RxA7_EAMYASAAEgL7vvD_BwE
      www.reddit.com/r/AskElectricians/comments/1cts313/when_rewinding_the_coil_of_a_generator_can_i_go/
      www.therailwire.net/forum/index.php?topic=50986.0
      www.iecex.com/archive/dubai/speakers/Day%202C_1100-1200_John_Allen_EASA_Rewind_Study1203.pdf
      Also these videos are pretty good!
      czcams.com/video/XRYSFalqe2U/video.html
      czcams.com/video/RldgLH-QLF4/video.html

  • @jamesschilling21
    @jamesschilling21 Pƙed rokem +1

    Nice job on this video

  • @sambaird1778
    @sambaird1778 Pƙed měsĂ­cem

    Thank you 🙏

  • @hellentavora2046
    @hellentavora2046 Pƙed 4 měsĂ­ci +1

    Very helpful for teachers.

    • @solarpoweredge
      @solarpoweredge  Pƙed 4 měsĂ­ci

      Excellent, glad to hear it! :) here is part 2 testing diodes, inverters etc. czcams.com/video/RBoQZ_HWm70/video.html

  • @Vic_714
    @Vic_714 Pƙed 23 dny +1

    Super helpful. Thanks!

  • @dropedlow33
    @dropedlow33 Pƙed rokem +2

    great info i been fryed way to many time like this one time was under a car port with placi room that leck had to chang alter in my couse min van it was porr out lay on a wet ground had to use pry bar to lift the moter at unbold to get out has a 500 watt holgen lite pice shit 100 foot exten cord 20 am breaker that never trip my one arm hit the lite my other hand was ground to the car got hit only thing same my live as sitting there frying was the pry bar lip from me shake and melt the cord we had 800 amp sever lucky didnt kill me but was nice had to be fry for at lest 10 min my couse my female couse dad thout it was funny told thew out the cord melt he got mad like it junk melt it then i show him then he was shocked leted a lot of it from pull so many amp theth it

    • @solarpoweredge
      @solarpoweredge  Pƙed rokem +2

      Glad you liked the vid. And wow that does not sound like a fun experience at all!... yikes

    • @dropedlow33
      @dropedlow33 Pƙed rokem +2

      @@solarpoweredge YES HOT LUCKY DIDNT KILL ME