How to Wire a GM Hotrod EASY | 1977 Nova Wiring
Vložit
- čas přidán 17. 01. 2022
- In this video, I show you how to wire a GM Hotrod. This applies to most GM applications, but specifically a 1977 Chevy Nova. This Nova was in need of some fresh wiring, due to the previous wiring being hacked up.
I completed a majority of the wiring in this video. The rest will be installed in a video coming soon, with the efi Installation.
Here are the products mentioned in this video:
21 Circuit Wiring Harness:
amzn.to/3KiR6sZ
Install Gear Grommets:
amzn.to/3ImvVEB
Solder Butt Connectors:
amzn.to/3fyUcLd - Auta a dopravní prostředky
Bro.. I couldn't have done it without you. After 2 years of trying to find someone to wire my 81 El Camino for me, I decided to do it myself. I watched hours of videos and was still confused.. until I found this one. Thanks for posting ✊🏾💯
You're my hero! I have been struggling with my 71 Nova harness that a previous owner hacked up.
Thanks! I'm glad it helps you out!
Mine was beyond usage lol the only way to do it, was to gut the whole car. It had been hacked up so many times In it's life
Dude you’re a life saver been restoring my Camaro for off and on about three years now and made some serious progress within an hour of watching this
I appreciate that man! How's your Camaro coming along now?
It’s back in business just waiting to get my plates back and it’ll be a driver again
@austinjohnson3452 awesome man! So glad to hear that!
This video is a life saver
I'm glad it helped you! If you have any questions feel free to reach out! I'll help anyway I can!
Thank you for this. I am using the same wire kit for my 75 f250. I have searched all over CZcams for someone with the same harness. I definitely and intimidated but your description detail helped calm me down. I saved it for constant go backs when I am stumped. Thank you for this!!
I'm glad you find the video helpful! It was a good install. 0 issues with mine at all!
I just wanted to say thank you for this video. I just might be able to finish wiring up my 76 impala.
Best vedio on the net iv watched them all very easy to understand thanks. Im doing a universal harness n a 40 pu with chevy engine n tilt not intimidated any longer THANKS
Thank you! It's a pretty straight forward job! Especially if you aren't switching to fuel injection!
Fuel injection is straight forward too, but you'll have to plan ahead a little more!
Great video
Thank you for watching!
Another project where you learn so much as you do it. Great job!
Thank you Kevin! It was a few day process, because I purposely broke it down like that! I just worked a couple hours a day on each section and got it knocked out.
Great video! Thank you for taking the time to share!
Thanks for watching! If you are going to tackle this project, I wish you the best of luck! If you ever have questions, I'm happy to help!
Hell yeah bro I’m about to do my first required on my 77 coupe deville and was supper intimidated before watching this video! Good looking out big time for explaining and simplifying I feel way more confident 👍
Thanks man! I'm glad you find it helpful! These new kits make it so easy+
Wow. Still impressed with the amount of work that’s needed to get her wired up even though you think it’s easy.
It's a very intimidating process. There are a ton of wires, but just knocking out a little at a time has been the best approach for me. Can't wait for the EFI
nice video. just a warning those cheap rubber grommets turn to dust in 5-10 years
Man that really really helped me…… thx
This video is giving me so relief! Thank you. Can I ask some questions though? I'm rewiring a 1972 Jeep CJ5 with a 304 AMC engine. I just wanted to confirm the IGN SW Start is connected to the starter.
Hi what type of wiring harness did you use on the Nova Car. I am looking at using a painless on my 1994 302 engine. Thanks for the info
I have the same harness and there are 2 wires that didn't come with any labeling they run through the same bunch it's a grey wire and a black wire. Where do you use those?
Is there another video that shows how you did the instrument panel, signal lights thermal plugs, and the ignition. I have no other experience whith automotive wiring. Please help.
Thank you for the great explanation! I’m planning on ordering this kit for my truck. I just had a question as far as relays, are they needed to run this kit?
If you have an electric fan setup, or an electric fuel pump drawing big amperage, it might be necessary. What is your setup?
It’s a carbureted 350 with mechanical fuel pump and hei. The fan I was thinking about ordering a separate relay kit for simplicity. As far as pump I was also planning on putting a inline pump since it’s takes a while to get up to the mechanical pump.
The truck kinda turned into a wiring nightmare, the harness was solid and I did the swap. I had to move it around while it was apart and broke the column, so I grabbed one from the junkyard. I guess it had a short and I was having issues. So I decided to build a whole simple harness for the truck from scratch since the drivetrain doesn’t need much. Now I’ve gone 2 years back and forth and I want to use something that is straightforward.
How do I run the A/C wiring
you don't need a starter solenoid for this do you?
Where did you get the harness? Trying to retire my 74 nova
Nice viedeo it's a good looking harness wat brand is it
Thank you! The link is in the description of the video! It all works flawlessly! I'm very happy with it!
Can you tell me what that type you used is. Is it gaffer tape or friction tape. Thank you in advance
Type this into the Amazon search bar, and it should show up!
TESA BLACK FUZZY WIRE LOOM TAPE
I need your help 😮
I'd love to! What are you working on?
@@JakeHarrington I’m working on a 85 Monte Carlo that i LS swapped.. I bought a new wiring harness kit, because all my old ones was pretty wore out.. I’m trying to figure out how to wire it up
Are you having issues with the engine side or the rest of the car?
What are you using to run the LS?
@@JakeHarrington i’m confused with the whole thing to be honest lol.. I’m running a aftermarket wiring, hornist plug-in play kit to run the LS