~500hp Audi A4 B5 1.8TQ TB60-03 Billet 2,4bar 8300rpm E100 fly-by

Sdílet
Vložit
  • čas přidán 24. 07. 2021
  • ~500hp 1996 Audi A4 B5 Avant 1.8T 20v AEB Quattro 2,4bar 8300rpm E100 (100% ethanol) fly-by, start from 2nd gear.
    Some spec list:
    - 1.8T 20v 058, AEB cylinder head, ADR block
    - JE Pistons 302023 81.5mm, Cr 9.25:1, conrods FCP X-beam
    - Kolbenschmidt Sputter conrod bearings
    - ARP M11 head studs
    - FCP Engineering valve springs and retainers
    - Inconel exhaust valves Supertech AEVI-1103S STD
    - Turbobandit TB60-03 Billet A/R 0.84 Twin Scroll turbocharger
    - Finjector BOSCH EV14 1300cc @ 3Bar
    - Precision PW46 wastegate + screamer pipe
    - MAC 4-port boost solenoid
    - Custom exhaust manifold T3 twin scroll, 38mm runners
    - ADR "J" camshafts, new stock INA lifters
    - VEMS V3.3 ECU (firmware 1.2.43)
    - Tenaci 4-puck clutch, SRE 3B 707 clutch pressure plate, single mass 240mm flywheel
    - 01E CET gearbox
    - AEM 400lph 50-1009 fuel pump
    - Fluidampr
    - Adjustable Autotech timing gear
    - Billet crank gear
    - Simons Sprint Jap 76 exhaust
    - Motul 300V Competition 15w50
    ....
    More videos coming! Subscribe!
  • Auta a dopravní prostředky

Komentáře • 23

  • @CrispThegamer
    @CrispThegamer Před 3 lety +12

    Camera guy is clearly used to filming Hondas haha couldn't keep up

    • @mikeb.395
      @mikeb.395 Před 2 lety

      turbo civic will smoke this Audi

    • @tunanocrust5089
      @tunanocrust5089 Před rokem +1

      @@mikeb.395 what an ignorant comment 😂 I’ve seen “turbo” civics make only a little over 200whp. Quit overhyping them. Maybe a gutted eg with a b or k series, maybe…. But even then you’re going to have to spend a lot of money to keep up with that Audi.

  • @hunter.220
    @hunter.220 Před 3 lety +1

    Top Notch 🏁

  • @unstable-8169
    @unstable-8169 Před 4 měsíci +1

    did you have to machine the block for any clearance issues with aftermarket pistons and conrods?

    • @A4B5Turbo
      @A4B5Turbo  Před 4 měsíci +1

      Nope. Just drop in. This problem was with old IE conrods, which was for 06A block.

    • @unstable-8169
      @unstable-8169 Před 4 měsíci

      @@A4B5Turbo thank you for clarifying

  • @ardakaanokkabas
    @ardakaanokkabas Před rokem

    How is bosch 044 fuel pump for 1.8T? Is it capable of 500 hp or not?

    • @A4B5Turbo
      @A4B5Turbo  Před rokem +1

      It's capable, but almost on it's limits at that power level, especially with ethanol. Better go with AEM 400lph pump. Same size, but flows better and not that noizy.

    • @ardakaanokkabas
      @ardakaanokkabas Před rokem

      @@A4B5Turbo i asked you two weeks ago then i bought an aem 340lph pump :) Thanks for replying.

    • @A4B5Turbo
      @A4B5Turbo  Před rokem +1

      @@ardakaanokkabas Sorry for that. 😂

    • @ardakaanokkabas
      @ardakaanokkabas Před rokem

      @@A4B5Turbo it's ok buddy, have a nice one 😅

  • @vag1.8t70
    @vag1.8t70 Před 3 lety

    around hp ?

    • @A4B5Turbo
      @A4B5Turbo  Před 3 lety +1

      ~500hp at the moment I think.. Never been on dyno yet.

  • @HaggisXS
    @HaggisXS Před 2 lety

    Is it 5 or 6 gears?

    • @A4B5Turbo
      @A4B5Turbo  Před 2 lety

      5 gears 01E CET.

    • @HaggisXS
      @HaggisXS Před 2 lety

      @@A4B5Turbo is it the stock transmission or is it from another audi?

    • @A4B5Turbo
      @A4B5Turbo  Před 2 lety

      @@HaggisXS It's from Audi S4 C4 2.2t.

    • @HaggisXS
      @HaggisXS Před 2 lety

      @@A4B5Turbo does it fit perfectly onto the 1.8t engine or do you have to do any modifications?

    • @A4B5Turbo
      @A4B5Turbo  Před 2 lety

      @@HaggisXS It fits perfectly to the engine, but you need driveshaft and rear differential from cars with 01E gearbox.