Hello everyone, The more experience a Mechanical Engineer has, the lower the cost. You work beautifully. Great job. A lot of effort has been put into this work. Another preserved work of art and history💯💯💯🙏🙏👍
Not knowing what was all over the yellow plastic, but it looked like cement. If so, next time use some Muriatic Acid and it will dissolve all that cement coat right off... Just a helpful idea... Thumbs Up!
It makes me mad how expensive power tools are in my country while there are piles of machines around some dump that only need some cleaning and effort to go back to work.
Is that made by metabo for dewalt.Because the inside the parts look the same has my metabo. Also I've got a metabo die grinder. Which there's a exact same dewalt one but yellow with the same parts.
I bought a dewalt angle grinder from a used tool store that looked like that, probably from someone in the trades who didnt take care of their tools and it was just cheaper to buy a new one
if it is such a good machine, a restoration would probably not be necessary, I have an angle grinder that is 35 years old and it is in good condition and runs perfectly
Where are they digging up all these tools and things? Waffle makers scales drills. Is someone excavating a city dump or something? Some of those things look like they were burried in an out house@
@@GWN_Garage // Based on your comment, you appear to be okay with the rampant fraud that is everywhere. Simply search "Restoration fraud" [on YT-if you're genuine/honest you'll begin to understand. If not you're part of the problem.
Esses canais asiáticos tem que começar a tratar os seguidores com mais seriedade. Todas as peças que fazem parte dos vídeos estão cheias de barro, como se tropeçassem em aparelhos pelos brejos da vida. É só pegar algo, em situação que não funciona, e arrumar, é isso que queremos ver.
This isn't full of mud, there are channels that seem to get things and bury them for the sake of it but this isn't. This drill is clearly one that's been well used/abused by a construction worker
Hello everyone, The more experience a Mechanical Engineer has, the lower the cost. You work beautifully. Great job. A lot of effort has been put into this work. Another preserved work of art and history💯💯💯🙏🙏👍
Amazing work and incredible results from the cleaned up plastic panels. Very impressive 🥰😍❤
Smarter than the average bear. Excellent restoration. Thank you for the video
15:31 Excellent results with plastic!!!
BRAVO MILLE FELICITATION CONTINUER ENCORE A TRAVAIL POUR AVOIR BEAUCOUP D EXPERIENCE. AMAR HADJI ALGERIEN ALGERIE
You're a true artist man.
DeWalt, Milocati, Bosch, and Makita are solid and sophisticated companies in the world of tools
The content is always so well thought out and executed. Great job!
you make it look easy. My compliments sir
Excelente trabajo de limpieza y reparación 🎉 felicidades un saludo desde Guadalajara Jalisco México
Very nice,great job on refurbishment of the hammer drill.good for a few more years.just keep doing what you do best.good video 😎😎😎👍👍👍
Please always remember not to store your tools underground. The dead people don't need them.
What if they want to escape their casket?
Fake video just for likes I reckon.
What an amzing job, congrats!!!!!!
that is a work of art!!!
so many parts wonderful restoration
Good Thing you found that problem; 😅great job!
10/10❤
Saludos cordiales desde Colombia ❤
I thought the plastics were a lost cause, glad to see I was wrong. Very nice.
Awesome job, great coverage
Bravo vous avez assurez. Bon travail❤
Nice job with the rubber grip.
I was quite sceptical of the handle wrap, but it turned out quite nice. Well done :)
Great restoration, hats off to you, viewer from trinidad
Ya it is good nice and fine clear restoration I would say good one
Nice!
Cấu trúc siêu phức tạp .
pour le remontage ,il faut avoir une bonne mémoire !!!chapeau
Ficou muito bom 👏👏👏🇧🇷🇧🇷🇧🇷
Not knowing what was all over the yellow plastic, but it looked like cement. If so, next time use some Muriatic Acid and it will dissolve all that cement coat right off... Just a helpful idea... Thumbs Up!
I tried an acid rust remover. It didn't work. It's probably resin or something
I.
AM.
IMPRESSED!!!!!!!!!!!!!!
:D
i have the exact same sds dewalt drill, for daily use my Makita 18V SDS-PLUS 20 mm (13/16") Cordless Rotary Hammer DHR202RFE is clear winner
Great video, but the only comical part is that you used a makita to take apart a Dewalt.
Love it, Lol.
It makes me mad how expensive power tools are in my country while there are piles of machines around some dump that only need some cleaning and effort to go back to work.
Is that made by metabo for dewalt.Because the inside the parts look the same has my metabo.
Also I've got a metabo die grinder. Which there's a exact same dewalt one but yellow with the same parts.
It was made in the Czech Republic, about ten years ago
Very nice job my friend
Oh my goodness , this hammer has a thousand parts...and you got it all back together....WOW. totally awesome. Thank you. great video
I would love to see where you found an expensive drill buried in dirt.
I bought a dewalt angle grinder from a used tool store that looked like that, probably from someone in the trades who didnt take care of their tools and it was just cheaper to buy a new one
It was right where he buried it.
Nice bro
How do u know about all spare parts comes proper place. U not confused. But really hats off 🎉🎉🎉🎉
Excellent video. What kind of grease did you use?
What is this white grease you use? Can you tell me the consistency number by NLGI?
👍🏻👍🏻👍🏻
You can repair the Milwaukee 2830-20 circular saw circuit
❤why did you test only hammer particular. Don't lik drill part😢
👍👍👍
if it is such a good machine, a restoration would probably not be necessary, I have an angle grinder that is 35 years old and it is in good condition and runs perfectly
Sir did you sales it after reapers you r tool s
👍👍👍👍
Красным герметиком фиксировать винты большая глупость. Потому что потом очень трудно будет их открутить. Я использую синий герметик.
👍👍👍👍👍👍👍👍
mühendislik harika ustalık süper ama darbeli aletle çalışırken üstüne baskı yapılmaz serbest bırakılır ve geri kalanı aradaki boşlukla darbe halleder.
Totally random but your double jointed thumbs are creeping me out, great work tho
💯👍😁💯
Great work..again. Are you interested of restoring my old sparky bpr 261e :D
Where are they digging up all these tools and things? Waffle makers scales drills. Is someone excavating a city dump or something? Some of those things look like they were burried in an out house@
True chad goes to the junk and with skills gets hammer-drill and keeps 700 euros in pocket.
Sip ok
How the bloody hell does plastic rust like that?
It's waterproof paint or something
Better than new !
How prize
Удар плохой, не резкий. Где то нарушена герметичность.
Restaurada furadeira 😉
You didn't show the part where you covered it in dirt 😂
Not that type of channel.
@@GWN_Garage // There's no advantage to doing that anyway-isn't lying about where it came from enough for one video?
@@GWN_Garage // Based on your comment, you appear to be okay with the rampant fraud that is everywhere.
Simply search "Restoration fraud" [on YT-if you're genuine/honest you'll begin to understand. If not you're part of the problem.
👏👏👏👏👏💯💯💯💯💯👍👌🇧🇷🇧🇷
Thats an expensive modern piece of kit to be found buried in the dirt like that.
Was thinking the same thing.......🤔
Esses canais asiáticos tem que começar a tratar os seguidores com mais seriedade. Todas as peças que fazem parte dos vídeos estão cheias de barro, como se tropeçassem em aparelhos pelos brejos da vida. É só pegar algo, em situação que não funciona, e arrumar, é isso que queremos ver.
This isn't full of mud, there are channels that seem to get things and bury them for the sake of it but this isn't. This drill is clearly one that's been well used/abused by a construction worker
No doubt-and he'd save a lot of time too, by not having to make it look like it came out of a hole.
هل من الممكن ان ترمى مثل هذه الاداة وهيه تشتغل وليس بها اي شيء هذا كذب مع احترامي لصاحب القناة
Very poor effect.
Откуда ты их вытаскиваешь?
The hole in the ground where HE buried it.