MMU3 Build for the MK4 - Part 2 (Chapter 4)
Vložit
- čas přidán 13. 05. 2024
- Instructions -
help.prusa3d.com/category/ori...
Prusa Affiliate Link -
By purchasing with this link, it helps out my channel at no cost to you
www.prusa3d.com/#a_aid=TADA
Ways to Support TADA3DPrinting -
My Etsy Store -
www.etsy.com/shop/mylilvillage
Become a member of TADA3DPrinting & get access to perks:
/ @tada3dprinting
Support this channel by purchasing merchandise - tada3dprinting.creator-spring...
Visit my Amazon Storefront - amzn.to/3Pxu31X
Need to contact me directly?
tada3dprinting@gmail.com - Jak na to + styl
I think your video is good for a beginning and an experienced builder. I use an egg crate or ice cube tray for bolts and such, kind of a handy way of organizing things while building. Nice job catching that bearing pin that was rolling away 😉
I used a Gridfinity tray I had printed earlier.
I really like pulling the screws and bolts for each step so I don't forget anything. Do you still do this? Thanks!
Legit ASMR meets printer building. Love it
Thanks so much!
You are much more comfortable putting it together than you were the first time. Things are going very smoothly.
Thanks so much!
Very cool. You're basically becoming a mechanic. You should be able to rebuild an engine carburator after this 👍🤓
Haha. In a later chapter where I am disassembling the MK4 nextruder, there is a step where you clean the grease off the gears. It gave me a strange flashback to "Small Engines" class in junior high. I definitely was more comfortable this time and enjoyed watching my own video instead of reading directions. Thanks so much!
Hit: It is better to mount the F.I.N.D.A. a little too high, than too low. I managed to mount mine in a fluctuating state. Which halted the printer. I dissembled a reassembled the extruder, before I fount out I just had to raise the F.I.N.D.A.
Man that's frustrating! Thanks!
I would swear this is the (exact) same video as the MMU3 for Mk3 video. The devil is in the details I guess.
The biggest difference is really modifications to the printer itself.
Yes for chapter 4 and 5, I reused a lot of video because the builds were the exact same. But I did add in the instructions and pictures from Prusa. Chapter 6 is the main video that starts to change. Thanks!