The Best ITX Case You Can Buy! 👌 SSUPD Meshroom S Personal Build!
Vložit
- čas přidán 16. 07. 2024
- My Personal ITX Build - with the SSUPD Meshroom S! This ITX PC case is awesome - it's a chassis ideal for small form factor builds, with PCIE gen 4 riser! PC Centric's SSUPD Meshroom S build guide and review, RTX 3090Ti and 12700K! ⭐ Alphasync PC Systems: bit.ly/3OVsasC (AD)
Product page: www.ssupd.co/products/meshroom-s
Newegg USA Pre-order links:
Meshroom S: www.newegg.com/grey-ssupd-mes...
Meshroom S No PCIe Version: www.newegg.com/grey-ssupd-mes...
🎮 Join The PC Centric Discord! / discord
Products provided out for review without direction or payment from the manufacturer for inclusion in this video.
🛒 Product Affiliate Links:
(When you buy through an affiliate link, PC Centric may receive a commission on the sale - as an Amazon Associate I earn from qualifying purchases)
Asrock Z690 Phantom Gaming ITX TB4 Motherboard: locally.link/OkrE (Amazon)
Intel 12700K CPU: locally.link/dven (Amazon)
Alternative Cooler: locally.link/nIpg (Amazon)
Powercolor DDR5 RAM: locally.link/YaJR (Amazon)
RTX 3090 Ti Graphics card: locally.link/LNt7 (Amazon)
Seagate Firecuda 530 SSD: locally.link/0GPP (Amazon)
Seasonic SFX Power Supply: locally.link/dHTY (Amazon)
My PC & Setup Gear - Ex review sample (RS), Ex sponsored video (SV)
My PC Case: (RS) locally.link/DrQk (Amazon)
My Desk (RS): locally.link/YsRq (Amazon)
My Oak 'Desk' Worktop: locally.link/Pbt0 (Worktop Express)
A great 1440p 165hz Gaming monitor (RS): locally.link/YckK (Amazon)
4K Benchmarking monitor (RS): locally.link/bkDk (Amazon)
My Personal Monitor (SV): locally.link/K3OB (Amazon)
Philips Hue Strips: (SV) locally.link/YZKl (Amazon)
My Keyboard (SV): locally.link/qUrE (Amazon)
My Mouse (SV): Logitech G Pro Superlight: locally.link/z7Ra (Amazon)
My Work Mouse (RS) - Logitech MX Master 3: locally.link/d00b (Amazon)
My Mouse Mat (S) - Corsair RGB: locally.link/ZPAa (Amazon)
Philips Hue Bulbs (S): locally.link/6Ixp (Amazon)
Philips HUE Play (S): locally.link/lf4m (Amazon)
My Desk 'Legs' Alex Drawers: locally.link/KN7V (IKEA)
My Desk Worktop: locally.link/SmiT (Worktop Express)
My animated wallpapers: / 1029664428197900289
Noblechairs ICON Chair (RS):
OCUK: bit.ly/2GMZSxs
Amazon: locally.link/wYNM
---
My Main Camera - Blackmagic Pocket 6K: locally.link/E9Ci (Amazon)
My Main Lens: locally.link/mMmF (Amazon)
My Main Microphone: locally.link/11HF (Amazon)
--
Subscribe to PC Centric for weekly PC, gaming and tech videos!
Follow @PcCentric on Twitter / pccentric
Add PC Centric on Instagram: / pccentric
Like PC Centric on Facebook!
/ pccentric
--
Music:
Epidemic Sound
--
All images used in this video are used in good spirit, and are believed to be ‘fair use’. If you feel an example of your work has been wrongly published, please contact pccentric@gmail.com.
PC Centric is a participant in the Amazon EU Associates Programme, Amazon Services LLC Associates and Amazon CA Associates, affiliate advertising programmes designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.co.uk, Amazon.com & Amazon.ca and other global Amazon Stores
00:00 Intro
01:26 The Meshroom Case
04:25 Motherboard of choice
04:53 CPU of choice
05:15 SSD Installation
06:07 RAM Installation
06:47 Motherboard installation
08:15 Radiatior installation
09:58 PSU installation
11:18 AiO Installation
12:09 GPU Installation
13:36 Cable management (kinda)
14:51 Turning it on
16:26 Testing the PC
17:15 Conclusion - Věda a technologie
“I DID THAT FOR YOU”😂 I love your reviews. Very genuine, light and funny, but quality and in-depth as well. An ATX build would be cool!
I love these videos. Really helped me with my setup. Thank you so much for creating your awesome videos.
I was just looking up this case and came to your channel. Your personality is awesome! Keep being you..
I would love to see a full atx build in this case to see how any difficulties are resolved
Gear Seekers has a great new build vid with a full ATX mobo.
I was able to fit a full ATX power supply in my Meshilicious, cables are tight but everything fits
Anyone fit an atx psu and full atx motherboard in either of these
@@kingcrackedhen3572 seems like you can but you probably have to go air cool instead of AIO
@@ryoannazuk949 it fits atx psus that strictly adhere to the 150mm length, but it requires some bending away from the mobo and you need to be okay with the psu pressuring the lower end components of the mobo. Not a big deal with strategic soft electrical tape as a buffer but isn’t pretty.
As someone currently running a Meshlicious with the same cooler (pre rgb but with noctua chromax and phanteks halos) and a Tuf 3080, you can definitely make everything fit with room to spare. One really easy thing is running cpu and gpu cables behind the motherboard before you mount it to save on cable space. You can also shove the sata power connection to the pump behind there too. If you really need more room, you can remove the plastic cage around the AIO pump with a single screw to get more clearance. The pump already has a rubber bushing around it to quiet vibrations. Best of luck with your management!
love this and as always your presentation didn't fail to make me chuckle
I really enjoyed this video. I love your humour. I like that you're building your new personal pc. I like how little it is and still preforms well. Show us again once you tidy-up the cables and put the fans on the front of another aio, I'd be keen to see it all done up and finished 👍 👌
And yeah, do a full atx build, that'd be great haha
Meshlicious is the best case I've ever owned and I'm not surprised SSUPD knocked it out of the park again. Love me some ITX!
How does it work with dust for u? Isnt the all mesh letting a lot of it into the case? I am interested in buying the meshroom S as soon as it is available in Germany, but I am a bit concerned about not having any dust filters in a case.
@@dubonstin8676 by the looks of it the fans on the aio are set to exhaust so dust would be minimal.
@@Valkirth going for exhaust only creates negative pressure therefore pulling air from everywhere else. Having a positive pressure setup with mostly intake fans is the superior configuration for dust accumulation specifically. Especially if you have dust filters at the intake spots. This is because in the positive pressure setup the air will look to get out from everywhere else (where there are no dust filters).
Looks absolutely sick! 👌
Yes please build a full atx into the meshroom...would make our week.
I think with x670e you might need to use matx or atx moboos for cpu cooler clearance, as new motherboards for itx will be rlly built up and cpu cooler compatibility will be really small also just set an under volt on the gpu so it is at the same clock speeds and lower powerdraw
Gosh, I love ITX cases. Right now, however, I really want to do a white build and have fallen in love with the HYTE y60 case. With that, going with a case like this would actually save some money not having to worry to much about the white components or much RGB to make it all flashy. Tempting to save some cash. I do like this case.
I’m definitely looking at the y60 for my next build too. I think it looks great and is incredibly unique.
I actually have the Hyte Y60. It’s airflow is meh, but gosh i love the white and panoramic view of it. I have a lot of people saying its really cool. But, i love the case. SO easy to build in.
HYTE Y60 is far too big in comparison and will cost more money. Fans are the biggest reason why I want SFF, I simply don't want to buy fans that are expensive.
The Y60 isn't an ITX case, not really. Hyte's other case, the Revolt 3, is, however.
Oh I LOVE ITX CASES.
I built in the Hyte Revolt 3 about three weeks ago.
Love this, been using the meshlicious for a year now no complaints, would love to see how actually 'usuable' the mATX and ATX motherboard options are for this new version.
For anyone watching you can actually get the original meshlicious with full mesh and a PCIE 4.0 riser cable instead of the gen 3 and in the UK its actually easy to get a hold of from overclockers
Just A shame that the PCIE 4.0 riser bumps the price up so much over the PCIE 3.0 version.
@@billionnaire1 😂
Well not if you look into getting the Linkup 14,5cm on it's own.
hi mate, so are the only differences between the meshilicious and meshroom ?
I have the first one and I really love it so I just bought that one today and try it out
looks like an awesome case, was thinking of getting the meshlicious but this upgrade is way better.
I've got the original case, 5900x, 2800mm rad, and the same GPU but the 3070ti, it's awesome! that RGB fills the case!
Thank you for such a thorough build! Are you a fan of LTT? Your mannerisms and style reminds me so much of early Linus pc build vids 😂
In my first meshlicious I put on longer stand offs and ran all my cables behind the motherboard. Turned out super clean would recommend. For all your cabling woes.
where did you get the longer stand offs?
man lately ive been wanting an itx build more and more... maybe for christmas ill treat myself
Your videos are so much fun
Nice case Marcus!
Sunny side up design really are delivering a good balance of quality/price
I would advise anyone building in this case to use standoffs on the motherboard to give space between the spine of the case and the back of the motherboard. This gives you room to run and store some of the cables.
where can i get the standoffs?
I would really want to see a full atx build as I have been looking for a case for a long time that is really compact but doesn't compromise on compatibility
Can't wait to see the full ATX buiild now...
Do a full ATX build in that case. I would also like to see an all air cooled build in this case!
I have the Meshilicious with the front fans in exhaust configuration (which has significantly lower GPU temps) and I love it paired with my 6700 XT.
Top Video. Thx. Ive got the 1stGen with Z690i Asus, i712700Kf, 32GB DDR5 6000, MSI Gaming X Trio 3090. I've done my build tree times until everything went fine and optimized the cable management each time. This is the tricky part, but in the end its one of the best its-cases to combine high end stuff in such a small form factor by getting good temperatures.
The beskar paint pattern on the heatsink is nice.
Meshlicious and Meshroom cases has the ability go from 3-slot gpu to a 4-slot gpu, the motherboard, riser cable and gpu stand-off can be moved to fit a gpu size up to 332mm, so larger gpus won’t stick out
I love these videos
Definitely try an ATX build, it would be cool to see how well it works.
SSUPD stands for "Sunny Side UP Design" to my knowledge.
It is. He was too lazy to look it up.
Meshroom is apparently more than an ITX case, as it can also fit (m)ATX motherboards & power supplies, so it would be nice to try making a build with the same case but different motherboard size.
yeah this is review kinda pointless since he did a Meshlicious review already
The Meshroom can only house an mATX or full ATX if you use an SFX.
@@chickenpasta7359 still wanna see it, how a micro atx would look
This case is cool but I love my nr200p max. And the temps plus the lack of noise from my PC are a welcome plus.
I firmly belive that exhaust is better than intake. I use this configuration in my Meshlicious. I dont want to blow hot air on my mobo. Cold side air might be a bit warmer but wont effect much.
if i’m not mistaken SSUPD stands for “sunny side up design”
Ready to get the blue one....
When building my Meshlicious build, I found myself having to attach fan grills to the AIO fans in order to keep cables from clipping them. And because I went tubes down on it, I had to mount the CPU block upside down, which really only made the EK logo upside down. 280mm btw
It would be cool if you could take a look at this cast with an ATX board and the external 360 fan bracket that SSUPD make
My Lian Li Tu150 suits me just fine, but thanks for playing!
I’d like to see a full ATX build. Thank you.
Echoing many comments here, mATX / ATX Meshroom build is what the world needs. The Meshroom is almost identical to the Meshlicious, and we already have so many ITX Meshlicious reviews out there. Doing a mATX/ATX Meshroom build will do so much more in helping people
It's between this and Xproto for me. Heard Zen 4 is very hot so the open build in Xproto seems tempting! Marcus do an Xproto video please???
You are my favorite youtuber :))
i like the case, its very beatiful
Thanks for the Video! Really entertaining ;) The Website says GPUs up to 336mm can fit here, your is only 314mm right? That already looks damn close, do you think 336mm will work? I need to fit a 4090 in there -.- :D
yes please do a full ATX build
There is a silent issue with the SFF builds regarding IO up/down in cases. It causes the cooling/heat pipes to work ineffectively. Horizontal will drop the temperature significantly. Edit: Also what is different between the Mesh and Meshroom?
Just built a new system with original Meshlicious and it's great! Got super lucky and got brand new one on eBay for 70 quid. Never going back to full-size tower ever again. This thing is only slightly bigger than my xbox series x.
I was hoping for a full ATX build on this if that's even possible, honestly it'd be a great choice to downsize if it is possible.
I for one would love to see an ATX build in this. I’d like to transplant my existing ATX build into this and then upgrade to AM5 around Christmas time, but I’m not sure how well it will fit. I’d love to see if an ATX build with an SFX PSU and graphics card could fit while also allowing space for hard drives. I’d be air cooling until the upgrade so no need to fit a rad in there and my current rig isn’t very high spec so I don’t think thermals will be bad with and air cooled cpu. Hope you do a video on ATX!
Same i want to make a travel pc for when i work away with old parts that i dont use from upgrading so i want it to fit an atx motherboard and still be compact to throw in a backpack for travels then as i upgrade my home pc i throw the old parts in this each time!
Can I ask you a question, how do you get companies to send you stuff like the RAM you said you were sent out in this video? Do you reach out to the companies or do they reach out to you? Sorry if the question is a bit to personal.
Yes, full ATX build in this please.
Great video ! Can you please do a atx build wondering if my b550F and 240 Aio will fit , with my 3070ti FE , thanks
I'm curious what settings you were using on cyberpunk. I have a 3090 ti and 5950x build that gets 70s-mid 80s ultra, RT ultra and dlss quality at 1440p. We're you using dlss auto or performance? Using dlss quality at 4k I have to use digital foundry's settings to stay above 60 fps.
I just finsihed a Meshilicious build a few weeks ago. So yeah, great case. Didd not know they were updating, but you showed that while neat (I like that green one) at leat it still is good to ahve what I have.
Also admitedly also made me not feel so bad sticing with the EK AIO instead of trying out the Be Quiet one
Would you happen to know if you can plug in 4 monitors in this PC case or does it restrict the GPU ports?
I love it
yes Marcus pls do build with a full size ATX board.
I do have a 280mm (DeepCool 280EX) in my white Meshlicious (with the fan's in the front). I'd love to replace it with a white 280mm that is better, but I don't think something like that exists. I replaced the Sapphire Vega 56 Nitro+ LE with the 6900xt Nitro+, and it with tricky fitting it in there. It would be interesting to put an ATX motherboard in the Meshroom.
curious if the meshroom can use the standoff mod like the meshlicious, would help with alot of the cable mess.
Why didn't you flip the radiator, so that the tubings could've went in top?
Does the larger riser cable works only for atx or both atx/matx? Not sure if i can use the integrated riser cable for a matx board, if i use the last pcie slot on the board, it could maybe work, the distance isn't so far for the included cable.
I wonder if the riser cable would block other PCIe slots - when installing an ATX or mATX motherboard.
The PCIE gen 4 riser cable came with Meshlicious also.
I want to build something like this but I'm wondering if you opt for Air cooled CPU and just threw reg fans on the front if that would free up space for cable management.
I prefer the earlier one, power button on top (which I use every time) vs an extra usb port (which I rarely use) makes more sense to me.
To be honest I tend to turn it off on the old version but now I would be able to move the case around without tuning it off😅
An undervolt on the 3090ti would be a great idea in that build, if anyone is going that route it’s a must.
Undervolting a 3090Ti is pretty much a must on its own in any case haha
Yeah, the second I saw that PSU with a 3090 Ti and a 12th-gen Intel chip, I knew that’d be an issue without undervolting.
the removable front IO is a big point !
PC Centric what are your thoughts on OverclockerUK?
What size Riser cable came with this pc? And that you used with it
I want this case, with a 280 mm aio, how much room do you have between the radiator fans and the board, it have enough space for data cables?, because I want too use a 2tb sata drive for external storage.
I am looking at getting a gaming pc to play f1 and other racing sims but dont really know what spec would be best, any advice would be welcome
Wish one could put a slim 120 on the top panel to exaust the air in both the cpu and the gpu side if one use a shorter card.
Can you fit Meshlicious tinted tempered glass panel on Meshroom S??
yea I want to see a full atx build in that thing
Temps are not bad at all if you put a the tempered glass on the mobo side…actually it improves gpu temps a bit…
Please do an ATX build with this case. I am planning to buy and want to see what I’ll be dealing with
How did you get those xpg hurricane fans?
Won't the panel infront of the gpu will cause problems for air flow?
Silly Marcus building an ATX build in this would have been a big brain idea for the title alone
will a 3090ti founders addtion fit in the meshroom? parts 12th Gen 12700k CPU, Asus rog Strix Z690-i , Cooler Master masterliquide PL240 flux AIO, FXP dagger 850 Power supply, I hear any card will fit?
please full atx build the meshroom s
Could you do me a favor and check if the 3090ti fit in the original mesh? I have a evga 3090ti and have the old mesh sitting in the basement. Don't have all the other parts for it and haven't find anyone fitting a 3090ti in the mesh1.
doing a meshlicious build next week wish me luck. This case is cool but the meshroom is a slight bit bigger.
Theirs no room in that to air cool is their? I was wondering if not having a rad would make it less busy but the height off the socket...
Does anyone know when the Meshroom S will be released in the UK?
i'm guessing this would fit a 40 series gpu's as well?
Hope you do new build with 4090 FE in this case with sfx-l power supply
can u make update with air cooler?
Will Nividia's 4000 series GPUs kill the SFF gaming PC format?
Wait what happened when you pulled the side panel off?
cant wait for the AM5 videos
I’ve never seen anyone complain about getting an extra screw.
I bought feet for my meshiliscous, it raised it up about an inch. 3d printed for $10. Took care of the cable problem.
could just get a longer right angle HDMI cable
Please do a full ATX video
Does that gpu fit in an NZXT H1?
is there a room for a 3.5 hdd?
8:11 what do you mean by “atx build” did you mean with an atx psu or atx motherboard?