Put ATX motherboard into ITX case! | Ssupd Meshroom S Build!
Vložit
- čas přidán 28. 08. 2024
- GPU:Colorful iGame RTX 4070 Ultra Z
CPU:i7 13700K
Motherboard:Colorful CVN Z790D5 ARK FROZEN V20
Cooler: Asus ROG Strix 240
SSD:Colorful CN700 PRO 1TB
Memory:Colorful CVN DDR5 32G(16G*2)6600MHz
Power supply:SEASONIC SPX750
Case:SSUPD MESHROOM S
Really like the power connector placement on the GPU.
Looks good, but glass panel psu will choke, no air moving over vrm or m.2 where are the tempe😊
You can always cut a few air holes into the side panel, but depending on the thickness of the glass it can crack fairly easily. M.2 and Vram should be ok, hot but fine, probably idling around 10 C higher than if there were fans blowing air onto it but the heatsinks on both should cover it.
meshroom is such a nice case, i wish the mesh panels were more rigid though
"It was an atx case?"
"Always has been"
*Gunshot*
I wonder how the PSU will get air to cool?
It can’t!! 😢
from the imaginary air flow
It sucks in glass panel
You can flip the psu in the opposite diection and it can intake air from inside the case.
Don't worry, most of these CZcamsrs that make these videos just take them apart right after they finish making it. It's not used
Very nice build. Just finished mine but I put the GPU in the front and the PCU in the back. no cables exposed!
Was it a sff gpu, mounted horizontally?
hii dude, is it possible to get a photo of your buid with the graphic card in front of the mb?
love the way the gpu looks!
Am I crazy or the MB did stuck out then somehow it didn't, and magically fit into the case later on ? 3:35 - 3:43
How did you use your ipad as a mintor for your pc?!!
Thank you for posting this video 🎥🍿🍺🇺🇸. You have a new subscriber 🎉. Keep up the great 👍 work 🎉. An amazing 🤩 build.
maybe flip the power supply, it can't get airflow and the VRMs on motherboard are also in still air. Beautiful build, but everything on the left side is going to heat soak, maybe if the power supply is flipped it can pull atleast promote a little airflow from the m.2 heatsinks, VRMs, and also cool itself in the process a little.
The PSU is choked though. A mesh panel would've been better. Not as pretty but definitely more functional.
Oh that is so awesome! i have been searching for a sff atx case, great vid :)
SSUPD just copied my case mod :)
You do realize it is possible for two people to have the same idea. People doing that same thing doesn't necessarily mean they're copying, they could have just came up with the idea not realizing someone else had already had it.
Maybe it's exactly what you think. But if I look closely at every detail, I have the right to doubt it - it's perfectly similar.
Psu dead by that glass if used too long.
I might buy this case and make diy/3d print attachment for eatx case.
considering cable mgmt is meh, and the psu fan is so close id have stuck with the mesh side panel
GG airflow
I would certainly change the orientation of the AIO fans to pull fresh air from outside and avoid the hot-air recirculation from GPU. Better if it is facing the mesh first prior the rad.
Also, since there is no other placement options, I would definitely use mesh side panel over TG. Less visual appeal but more practical in cooling. Flipping it to face the inside of the case if TG use is preferred, to get air from inside the case. Not very efficient, but it'll way more effective than facing dead-on a glass panel.
Unfortunely putting the fans to intake does not yield better temps at all, it only makes the gpu rum hotter because the aio isnt assisting it im getting the air out.
Aio intake would be much better if there was more room between the fans/radiator/case
你的Riser Cable是多长?
psu say please let me breathe 😂
а куда выдувает блок питания ?: или что он вдувает ?
I wonder how PSU fan get air flow if this case does not have mesh panel instead of glass one ?
will the AIO radiator het hot because of hot air from GPU ?
The graphics card will vent its heat to the sides that the AIO fans next to it will suck the hot air into the radiator. Not the ideal combo for performance but this is just for aesthetics.
Doesn't make much difference in temperature, around 2-3°C
It does suck in hot gpu air, but the Radiator is so close to the gpu that it actually blocks one side of the gpu exhaust. So it doesnt affect it by much
Tell me is 15liter for matx case , consider a small or just decent??
Im talking acer u300 case
Do you have any case recommendations that support matx mobo and atx psu
Smaller dan acer u300??
hello friend. how long is the pcie4 riser cable that you have shown on this video to install your graphics card behind the case. thanks
From the research I did, it is a 380mm cable
@@curiouslilpanda thank you friend !!
how was the thermals? 4-6 hrs usage?
I feel bad for that power suuply
One of the best parts of windows 11, is that if your CPU has an integrated GPU, you can just put your monitor cables into the motherboard, and do not bother with putting GPU ports. System will utilise discrete GPU accordingly, depending on load.
Which means, you can make insane builds/chassis.
what tools do you use?
Can Install the radiator 360mm ??
Если была цель сделать компоновку не выходящую за рамки материнки, то задача выполнена. Только толку от этого мало, охлаждение на нуле
Why it's so loud at the end🤔 and that squeak
Because the fans ramp up when the PC is started?
@@iam_justbored I watched his previous builds and none of them has that noise
featuring the psu with a clear panel but not the gpu is a mistake
nice build
Can anyone please tell me more about the gpu riser cable he used?
I have asrock B450 motherboard and amd 5700xt, what cable should i use and how long that should that be for SSUPD.
If your motherboard is ITX then you use the one that’s included, if it is ATX then you need a 380mm cable
И зачем там стекло, с таким то видом. Кабеля как лапша в коробке, да и блок питания в глухую стеклянную стенку. Не практично, да и не понятно как себя поведёт водянка 240 в таком пространстве. 😢
Ncase M2 matx build
]he will never run stress test on it.... it will literally burn
че то выглядит так себе, собирается сложно, зачем такое надо
in this current build, there is no reason to have an ATX Board. Sorry but no.
The only good reason is when you want to use a good ATX board you already have
Nice case..weak mesh
There's no room for cool air inside this case
that's ok, because you just take pictures after building and remove all the panels if you actually want to use it
@yilongwei4592 That is incorrect, it works just fine, it's an itx system not a full tower with 7 fans..
@@zetter5888 we call it a "MenGuan" , meaning "heat can"
SSUPD cases actually have really good thermals.
Whats worrying is the glass panel. That PSU will suffocate and fry the entire system.
With full mesh panels, there is barely any difference between this case and a mid-tower.