SSUPD Meshroom S V2 Build - Step by Step Guide
Vložit
- čas přidán 4. 07. 2024
- A full step by step guide to building a PC in the SSUPD Meshroom S V2 PC case. This guide assumes no previous knowledge and is perfect for a first time PC builder. Links to parts used in the build are below.
00:00 Intro
01:17 Panel Removal and Case Orientation
02:42 Motherboard Options
06:30 Power Supply Options
08:26 Fans and Radiator Options
09:57 Rear GPU Mounting Options
15:24 Installing Case Feet
16:00 Rear GPU Mounting Options
17:59 Converting Case to 4 Slot Mode
21:40 Moving GPU Half Slot Away From Motherboard
23:05 Horizontal GPU Mounting Options
24:59 Front GPU Mounting Options
28:42 Top Fan Installation
29:01 Storage Options
32:19 CPU Installation
32:46 M.2 SSD Installation
33:16 RAM Installation
33:37 Motherboard Installation
34:30 Power Supply Installation
35:18 Case and Power Supply Cable Installation
36:11 CPU Cooler Installation
39:39 Graphics Card Installation
41:39 Cable Management
42:07 Complete Build Footage
42:54 Setting PC Up
43:09 Thermals
45:10 Case Review
Parts used in the build (Amazon links are Affiliates Links)
• SSUPD Meshroom S
UK - ssupd.co/products/meshroom-s?...
US - ssupd.co/products/meshroom-s?...
CA - ssupd.co/products/meshroom-s?...
• ASRock B650E STEEL LEGEND WIFI
UK - amzn.to/3PPgERA
US - amzn.to/43WWJXj
CA - www.newegg.ca/asrock-b650e-st...
• AMD Ryzen 9 7900X
UK - amzn.to/3UXwMm3
US - amzn.to/3e4kB6w
CA - amzn.to/3SPml23
• Cooler Master MasterLiquid PL240 Flux CPU Cooler
UK - amzn.to/3IJ5I5s
US - amzn.to/3MZqPTU
CA - amzn.to/43prZxa
• Kingston FURY Renegade RGB White XMP 32GB 7200MT/s DDR5 CL38 DIMM Desktop Gaming Memory (Kit of 2)
UK - amzn.to/3nXAC2y
US - amzn.to/3LosNfK
CA - amzn.to/3bOCyVb
• ADATA Legend 960 1TB
UK - amzn.to/3UpzbEM
US - amzn.to/3VMWae4
CA - amzn.to/3XTiUuI
• FSP Dagger Pro 850w
US - amzn.to/3GzVX60
US - amzn.to/3MDRrbq
CA - COMING SOON
• NVIDIA GeForce RTX 4070
UK - www.nvidia.com/en-gb/geforce/...
US - www.nvidia.com/en-us/geforce/...
CA - www.nvidia.com/en-us/geforce/...
• Sirlyr 12vhpwr Cable (A Connector Black)
UK - amzn.to/3MCUeS7
US - amzn.to/45ubXEb
CA - COMING SOON
• XSPC Radiator Fan Screw 6-32 30mm
UK - amzn.to/3orgrLd
US - amzn.to/45uuUGK
CA - amzn.to/3BUY0l9
• Gelid Solutions GC-Extreme Thermal Paste. Save 10% with Promo Code - gelid x Chris 240
UK - amzn.to/3tzlnwT
US - amzn.to/3mM8Sdm
CA - amzn.to/3xp1n0Z
• Maidesite Standing Desk S2 Pro Plus - shrsl.com/3wwme
Affiliate links
I am part of the Amazon associates program, this means I get a small commission when you buy through these referral links.
More photographs of the build can be seen at pcpartpicker.com/b/nLbhP6 and a time-lapse of the build can be seen at • SSUPD Meshroom S V2 Build
Useful Links
• AMD Ryzen 7000 Series PC Build Guide - • AMD Ryzen 7000 Series ...
• How to make a Windows 11 Bootable USB - • How to Make a Windows ...
• Motherboard Drivers - www.asrock.com/mb/AMD/B650E%2...
• NVIDIA Drivers - www.nvidia.co.uk/Download/ind...
Music
Be This Way - HALLMAN
www.epidemicsound.com/track/7...
#pcbuild #SSUPD #gamingpc #buildcomputers #tutorial #beginnersguide #buildingpc #electronics #personalcomputer #budgetgamingpc #budgetpc #itx - Věda a technologie
I've never seen such an indepth build guide before but thank you, I'm transplanting the guts of my current build into this tomorrow and you've covered all bases.
Did you use an atx or itx motherboard?
thank you so much for the comprehensive review! all other youtubers just straight up made a build but didnt really show the capabilities of the case. i appreciate the effort and time you spent to explain everything! looking forward to seeing new builds from your channel :)
Amazing video; I had many questions about GPU size that weren't very clearly answered elsewhere, and you covered everything in fantastic detail. Thanks!
Great job with a thorough and well explained build. SSUPD should use this as a build guide.
Really appreciate the breakdown of all motherboard configurations!
amazing step-by-step man, well done! subscribed!
Thanks
Absolutely good work, the possibilities that Im searching for.
A comprehensive and brilliantly produced video, thank you. I wonder if the additional satisfaction from completing SFF builds outweighs the increased difficulty and frustrations? I'm tempted, though...
Also, as a side note, this was for me a convincing advert for electric screwdrivers!
I much prefer big cases and some swearing was involved in this video (manual included in box not great). With the electic screwdriver I ahven't found the perfect one yet, this one is a bit too powerful
thinking of going sff my next build, will definitely reference your vids. thx!
Well done! Thx for your efforts on it.
excellent & comprehensive video thank you 👌
The video is so amazing
keep going hero💯💯
Thanks
@@ChristopherFlannigan Your welcome my best❤❤💯💯
thank you sooo much
21:40 good to know! This will help with FE cards flow through design.
FK brilliant, answer all my questions.
Impressive! 👌ty
Thanks
Thank you for the very clear and detailed build guide. I will go for an ATX board + ATX psu + 4slot GPU for my next build
thanks
Hi Chris, the quality of the way you do these step-by-step guides for the PC cases, they are better than the manual that comes with the case. This is why I'm subcribed to your channel.
I like the way you test to see if every component fits, so us viewers can get creative and make the purchase if it fits our style of build. There are no videos out there like yours that are able to help me with ideas for the Meshroom S case. I've been wanting this case for a while and have been afraid to make the purchase due to parts fitment. Even though your video has covered everything, there is still one more fitment I've been looking for and still cannot find it.
Would you able to confirm or show that a PCIe riser cable can fit into any of the lower PCIE lane slots on a ATX motherboard with the SFX PSU in place. SSUPD said that a riser cable can fit into any of the lower slots on a ATX motherboard even with the SFX PSU in the case. I've seen so many pictures and videos (including this video) with the ATX build, it doesn't look like it can fit, and I'm scared to take the risk making purchase of both the case and a SFX PSU.
Cheers
Just tried this and it doesn't fit and that is with the case in the standard position (3 slot mode), if converted to 4 slot mode it will be even worse. Thats with the motherboard, riser and PSU I used in the video, but would expect similar results with others. Thanks for your support. I would go ITX if building in this case again.
@@ChristopherFlannigan Thank you for testing this, saved me time and money. ITX is the way then. Awlays looking forward to your future builds, testing etc. Hope you enjoy all the content on Computex 2023, I'm sure you have many videos ideas for all of these new cases and components on display at Computex. Cheers
you can fit a full atx psu with a Matx board. it just depends if your board have excessive heat sinks/shrouds like your chris.
5:50~6:29 SSUPD has released front extension kits for Meshroom S to solve this problem. Although it adds a bit size, but it still smaller than most ATX or even MATX cases, while increasing compatibility.
Great timing Chris, I have the case standing here and the manual didn't tell me much. Thanks for the video! 🫶
Thanks for the very detailed build guide. I want to go ATX+SFX+big GPU and possibly custom watercooling (already have a block, pump, tubing, micro res). But im not so sure now. This case really needs to be a few millimeters bigger for ATX and mATX, but then the ITX SFFPC elitists would complain. Im not sure what to do, as this is by far the smallest 'reasonable' (price, features) ATX case, and the next case up would be around 27 liters and have its own compromises too, thats a big jump up from 15L. Ugh.
35:31 helped me out
Hello, I am kinda concerned about the aio tubes on the top being bent like you mention. Is it really that bad?
Hello, do i need a 380 mm riser cable or a 270 mm riser cable to build a pc with an atx motherboard ? is it possible to mound an 240 aio with fans beetween mesh side and radiator ? and route downward tubing without too much hassle with the riser cable ? Any advice will be welcome, Nicolas Perrin
Please make a video with front extension mod provide by Ssupd . And please use itx case if possible . There literally no review with front extension on v2 case . This case is so dream come true . I could hardly imagine any other cases which can complete with it .
Is it possible to add front fans and / or rear fans with the atx motherboard?
If you use an ATX mobo with this case, can you use the pci-e slots with a sfx PSU? I want to use the PCI-e slots for 10G network card and graphics cards.
I think i will try to do it! But what is the pcie cable? Is it from sspud? Thanks!
Hey, whats the name of the GPU that was adjusted for 4 slot mode? Thanks
So if you go atx mobo & atx psu, you can’t go 280mm aio, only 240mm?
Is it possible to install wifi pcie card below the graphic card in the case for the ATX motherboard? if yes, then how?
I'm just not a fan of the highest part of the AIO being those tubes. That is where the air is going to keep possibly causing bumpy starts if left off too long.
Not sure to choose either this or lian li sup-01
Please do another one with an mini ITX mobo!
Need help will the ASRock X399M Taichi Micro ATX fit in this case and i wont have any issues?
How to access gpu i/o in vertical mount?
Are you going to test / build the DAN case C4-SFX?
No plans to. I had contacted them a few years ago offering collaboration and they told me where to go. Pity when you see what I can do with a build guide.
Did they improve panel quality on Meshroom s I heard they bend
B660m Tuf and NZXT C750 lenthg 150mm can fit in this case?
v3 needs to get rid of the need for 90 degree hdmi/display cables.
if you're running multiple displays like many people do, that's multiple 90 degree adapters upping cost significantly and increasing hassle to an otherwise almost perfect case
What screw driver do you use?
thank you so much but there in no chance to find white version on the market three months after this...
Can plug in 4 monitors in this PC case or does it restrict the GPU ports?
I have a 4090 Suprim Liquid X and an ATX mobo. I don't think both will fit into this, even if I downgrade my CPU cooler from a custom loop to a low profile cooler. I will seriously have to consider purchasing an ITX motherboard.
can I know about riser cable name?
What if the Aio pump is in the radiator instead of the cpu block like an MSI aio. Does the mounting orientation really matter like others with the pump in the cpu block?.
Not for damaging the pump but if you have waterblock at top of loop any air will collect in waterblock and may affect the cooling
So we cant fit in a matx mb? 9.6x9.6
Hi Chris, your o11 build guide helped me a ton the other day when I built my 4090 strix rig in that case after 7 years of using the same old PC without ever updating it. Unfortunately, while the build came together beautifully, Lconnect is proving to be maybe the single worst piece of software I've ever encountered in my entire life. Looking online, there's plenty of other people, especially on reddit, that seem to have been having issues with the software always being frozen and unresponsive for months, if not years, with no concrete solution being provided by lian li. Do you think you could ever do a video on this topic?
Specifically, what's happening is that 9 times out of 10, the Lconnect window doesn't allow me to do anything other than move it around. I can't click on it, I can't select any options or tabs on it, and on most occasions, the infinity tab that normally shows a visual representation of the fans' layout doesn't even appear in the program window. Continually using task manager to exit out of the software and relaunch it does nothing either. I've only gotten it to work a total of 3 times, I believe, and each of those times, the program froze up after a couple minutes of me tinkering with it. The last time this happened, I was finally able to quickly set the fans to the color I want, but the window froze up before I could do anything else. This happens with every single version and update of Lconnect that I have gotten, and I've gotten about a dozen different ones at least, using manual installs to manual updates to everything else I can find recommended by lianli reps on any reddit threads and blogposts pertaining to these freezing issues. Also, I had uninstalled armory crate right after starting up the pc for the first time, so there's no armory crate software on my system either.
My build is a 4090 strix oc with a 13900k cpu on a z790 rog maximus hero mobo, 64gigs of ddr5 corsair dominator ram, and 10 lian li SL-infinity 120 unifans, arranged in three groups of three with one by itself in the rear of the case, for a total of four connections going into the lianli controller hub, as well as the really thin wire connecting the controller hub to the motherboard.
It's been incredibly frustrating dealing with this, and doubly so because there seems to be no real investigation or resolution of the issue on lianli's part, nor does there seem to be any discussion about it on youtube. Had I seen videos showing these problems in play as I've described them here and as I've read them described by others on reddit, I would've gone for a corsair setup instead. Really hope you look into it sometime so we can have some light shed on all these issues with Lconnect.
I haven't experienced these issues. Might be worth a clean install of windows (it's almost impossible to get rid of armory crate and last time i had issue with it a clean install worked).
@@ChristopherFlannigan Damn. I guess I'll do this. If only I hadn't clicked on that button to install it in the first place 😅
Oh my goodness what is that case in the background?
HAF 700 EVO, can't beat it
What Aorus card is this?
This case must be brand new, it's not even on their website
I think it is the same as the old one with the feet to give the improved gpu length so not sure how big a deal they will make of it.
May I ask where you got case from? Overclockers been oos for ages
Caseking has it.
Send to me by SSUPD
What I hate is that they were completely silent about v2. Nothing on the page. Nothing on the box/instruction. Stores lists v1. Received v2. Whole planning to have 336mm Suprim X is busted because the "no feet" config is reduced from 336 to 332mm...
Not sure if many people would go for ATX mobo here but ok sure.
agreed, I wouldn't if building again
@@ChristopherFlannigan I built my first build in lian li 216 following your detailed guide. Keep up the great work, love the channel.
Cause I have good parts but massive case. This case is perfect! I dont need to go out and buy a new mobo. And my GPU will finally fit inside a SFF case. Kudos to the team who did this.
@@kamata93xactly! Perfect case for someone wanting to downsize! I wanted to keep my mobo but went itx so i could still use my 240aio. Ended up only having to buy the case,mobo and riser cable. Everything else i was able to re use from my old build.
To downsize their current pc without spending a lot of money?
Its unacceptable that even with right angle connectors your case wont close lol they need to accommodate for that next time.
They couldn't make the case 5mm longer to let you use those sata connectors 🤣
People still use SSDs? There aren’t that many good PC games to install haha
Very low energy review. It almost put me to sleep.
Glad you liked it.
@ChristopherFlannigan i rather have this tempo where I can understand what's going on, rather than hyperactive Americans drinking at least 10 redbull before doing the review of a product.
Is this the U WOT M8 kid all grown up?
Always with a 240.. Never with an Arctic 280..🤔🤔🤔🤔🤔🤔🤔🤔🤔Greetings.