@@RKGarage yeah litterally haha. Was a god for the 5l guys. And now for all my cars like my wagman (vy v6 mystery cam motor) I used a v6 wk loom in the vy v6 wagon cos i liked having cup holders and didnt want to pay 800 bucks for the trim to fit. Look whos crying now. I have a brief short on my youtube channel of the outaide (wk front end on the vy wagon)
Thanks for the update mate. Have you got a video on other tuning and customisation of parameter using tunerpro? My Car is running a bit lean after fitting a cam and I want to bring up the AFR's
Opps I wish I had this video a few days ago, I did a write cal without auto fix checksum enabled guess I’m lucky it worked or mum would have killed me.
Hey Mate, did the1enhanced tune, got rev hang bad, also when stopped at lights, revs are dropping to 650rpm. its a vy2 getrag manual. any advice at all would be most appreciated!!! and many thanks to your videos.
where did you source the bench harness man, did you scab a loom from a car and wire it yourself? Would an envyous software aldl lead work no worries if you do it in the car?
Hey mate just wondering what are the options in the idle menu? Trying to fix rev hang on my factory manual vx and I believe the IAC is tuned to stay open for a brief moment after coming off throttle causing rev hang. Wanting to know if the IAC has any tuning options, cheers
Am I right in seeing that you changed that from an auto trans setup to a manual trans setup? I did a trans swap in my VY spac and I've got "rev hang", (I'm using the auto loom and ECU, just rigged it to think it's always in neutral). Will this flash fix that? Suggestions??
Yeah from memory I did this so it was set up to be manual. Manual's usually always get that rev hang, i had it with a Kalmaker tune as well. This flash tune may help subside it a bit tho!
can you dial in mods you have installed. Like Pacemakers? EGR Delete, Throttle Body Sizing? sorry I'm a rookie on cars ecus atm and dont wanna push a button I'm not supposed too. Cheers heaps
Hey mate sorry if it’s been asked before but would this auto tune work on my manual ecu? I don’t want to download an auto tune and it causes rev hang issues etc.
Is there a file out there for a Auto VX S2 Mang sedan with 1.98 rockers, 69mm throttle body, Growler intake, Full Exhaust and 3.46? Awesome video by the way. 👌
Hey buddy i have been flashing ecus like crazy today and i set my thermo fans 80degrees and they dont come on when there supposed to would u know what have i done wrong ???
@RKGarage any chance you have a link to an article where I can read more into it? There's so much different info out there that I can't find what I need. Cheers
@RKGarage but what about all the blokes running L67, they need help brother. Im past that scene now owning a LS1 but there is a big community of blokes with L67s myself included i couldnt wrap my head around tuning the memcal
Used your old video and had success, let’s see if I can learn anything new.
Thanks for all your videos man. I refer to you as greanfoam v2.0. To my mates lol ;)
Hahahaha now that is a name I have not seen for years! He is one of the greats for sure!
@@RKGarage yeah litterally haha. Was a god for the 5l guys. And now for all my cars like my wagman (vy v6 mystery cam motor) I used a v6 wk loom in the vy v6 wagon cos i liked having cup holders and didnt want to pay 800 bucks for the trim to fit. Look whos crying now. I have a brief short on my youtube channel of the outaide (wk front end on the vy wagon)
Thanks for the update mate. Have you got a video on other tuning and customisation of parameter using tunerpro? My Car is running a bit lean after fitting a cam and I want to bring up the AFR's
Hey mate, I don't yet but may do that soon when I have time this chrissy break!
I never did write bin as I’m using the original one from the car that’s ok isn’t it I have just been doing write cal with the changes to original bin.
Opps I wish I had this video a few days ago, I did a write cal without auto fix checksum enabled guess I’m lucky it worked or mum would have killed me.
XD I just noticed that I nearly forgot to check itttt
Hey Mate, did the1enhanced
tune, got rev hang bad, also when stopped at lights, revs are dropping to 650rpm. its a vy2 getrag manual. any advice at all would be most appreciated!!! and many thanks to your videos.
where did you source the bench harness man, did you scab a loom from a car and wire it yourself? Would an envyous software aldl lead work no worries if you do it in the car?
does the flash tune do anything? like, if i just put it on but don't adjust anything?
Hey mate, great vid. Do you have a pinout for the ecu for the bench?
Its on the description mate
hey bro I'm just having some issues downloading the bin and opening it in tunerpro it let's me open bin but not select xdf
Hey mate just wondering what are the options in the idle menu? Trying to fix rev hang on my factory manual vx and I believe the IAC is tuned to stay open for a brief moment after coming off throttle causing rev hang. Wanting to know if the IAC has any tuning options, cheers
Did you figure it out?
Am I right in seeing that you changed that from an auto trans setup to a manual trans setup?
I did a trans swap in my VY spac and I've got "rev hang", (I'm using the auto loom and ECU, just rigged it to think it's always in neutral). Will this flash fix that? Suggestions??
Yeah from memory I did this so it was set up to be manual.
Manual's usually always get that rev hang, i had it with a Kalmaker tune as well. This flash tune may help subside it a bit tho!
can you dial in mods you have installed. Like Pacemakers? EGR Delete, Throttle Body Sizing? sorry I'm a rookie on cars ecus atm and dont wanna push a button I'm not supposed too. Cheers heaps
Yeah you can, but all of that stuff does basically nothing
Any chance you know how to do flash tune for crackel pop ? Been trying to do it for ages 🙏
Yes mate I do them
Will enveyous customs aldl obd2 cable work ? My mates got one see if i can get it set up on his laptop for him when i go over there
Yeah mate, thats what I use.
@@RKGarage so doing it in the car instead of the bench is it just plug the aldl cable into the obd2 port and then usb end into the laptop
Hey man, what’s the best way to hook my ecu up to my laptop? Any suggestions?
What ecu is it?
Is this the same procedure with a Nvram in a VT l67 ?
No need for ose flash tool with a nvram
Pretty sure you click the emulate button and there is a send to ecu button to write the file
Hey mate sorry if it’s been asked before but would this auto tune work on my manual ecu? I don’t want to download an auto tune and it causes rev hang issues etc.
All manual tunes cause rev hang, part of the manual tunes
There are ways to get rid of it in the tune tho
@@RKGarage any tips on how to remove it? Also is there a way to tell if my ecu has been tuned already or been adjusted?
Hey bro can u do all this stuff on a basic cheap laptop around $300 can they handle it or will it cook my ecu
I have used a $100 laptop before, sheel be right
Hey man just wondering where ur from and how much it would cost for u to do a ghost cam or bangs and pops tune on my vy ecu
Perth
@@RKGarage hey man sorry to bother u but what’s ur email I was wondering if u would be able to help me with a certain issue
Rkgarage@outlook.com.au
Wen you going to show us how to do the gost cam tune
Never.
Hi, will this work for a vz calais v6 2004 Dec model?
Thnx
No
Is there a file out there for a Auto VX S2 Mang sedan with 1.98 rockers, 69mm throttle body, Growler intake, Full Exhaust and 3.46?
Awesome video by the way. 👌
Thats basically the stock tune
@@RKGarage Thought that might be that case.
To go against the grain is there anything in the tune to be done for economy?
@@RKGarage Car doesn't get flogged it's just a really neat daily that happened to find itself some parts that were lying around.
Basically a custom tune mate
No generic stuff you will benefit from
@@RKGarage Again thought that might be the case.
Appreciate your time mate.
Keep the content coming. 🙂
Do you guys get pcm's sent to you and you flash then send them back?
Sure do mate
Hey buddy i have been flashing ecus like crazy today and i set my thermo fans 80degrees and they dont come on when there supposed to would u know what have i done wrong ???
Saving and flashing the correct bin?
I'm fairly confident that I'm saving and flashing the same bin 😀
Makes me want to turn the rev limiter down and make it only spark cut, bend a few valves haha
Can't spark cut on this ecu
Is it possible to do this on a VT v6? I noticed your title only says vx
Vx vu vy
So a kal tune will be my only option?
No
You can buy blank memcals, uv erasers and eeprom burners.
@RKGarage any chance you have a link to an article where I can read more into it? There's so much different info out there that I can't find what I need. Cheers
Hey mate - can you do a tutorial for MEMCAL based cars like L67?
Sorry mate, I don't waste my time with memcal junk
Flash tune is the way of the world
@RKGarage but what about all the blokes running L67, they need help brother. Im past that scene now owning a LS1 but there is a big community of blokes with L67s myself included i couldnt wrap my head around tuning the memcal
Considering it costs about $500 to get tge gear to burn memcal's... isn't worth making the video on it when the viewers will never spend that money
@RKGarage your not wrong lol, i thought it was same programs you just need to get a writeable chip
NVRam
bro do you even fttp or fttn... #bigev
Fttp 👌 I get 921mbps/46mbps on average
think someone needs to share some bins with us ;)
Rubbish or recycling?
@@RKGarage recycling of course all those 10 cent refunds ;)
Do you have Facebook or ig or something