Rhino 660 Primary & Wet Clutch Removal
Vložit
- čas přidán 3. 04. 2016
- As I said in the video, I am not a camera guy nor a director so this video has many imperfections. You can tell I don't know what I'm doing doing. I am just an average guy trying to figure things out. Maybe it will help other guys to try to fix their problems.
Right on man. Gave me the confidence to try my own. Thanks so much for taking the time to post this! Everything you said is completely accurate. Only guy on the web I found that knew the rhino is all regular left hand threads. Thanks again!
Thanks for making this video. Gave me the confidence to replace my wet clutch on my2005 Rhino.
Thanks for watching, a little know how can do wonders.
Thanks for watching, I did not edit it out.Did not record it as I had to disassemble the seat frame and forgot to turn the camera on.. Sorry about that. Like I said, I am not a professional. Learn as I go. I will check my videos to see if I have anything.
how did you get the secondary pulley out!!!!
Hey i don't see where the reply on getting the prime clutch out cause my seat frame is welded factory
You mean the secondary clutch ( the big one). the primary is in one of the videos, thanks for watching.
Thanks for the heads up on this. I might be doing this soon. 👍🏻
Just replaced the wet clutch on my Massimo 500. Not very difficult. Just be sure to put the one way bearing in correctly. The drum shaft should turn CCW but not CW. Maybe different for rhino but probably not. Good luck.
Thanks for watching. if you look at the video before this one I explain how the one way should go on. This video was done 7 years ago, machine is still going strong. See the video here Change Rhino Wet Clutch Housing.
@@RhinoRider2006 👍
Not too many guys your age willing to get down on the floor and do it yourself. I'm 65 and I still do as many things myself as I can. I rebuilt the G52 transmission in my Toyota truck.
HOW?...did you get the secondary sheave assembly out? why did you edit it out?
Just take the nut off then you will have to pull the engine the opposite direction while pulling the secondary sheave off for the rhino 660 the 700 you can just pull straight off
you are the man thanks
Thanks for watching
Nice of you to skip the step of how to get the secondary pulley off. It hits the frame so did you loosen the motor mounts or what?
Did not loosen the mounts. As I have mentioned, I was learning as I went. I just played with it and moved stuff until I could get it out. I think I loosed the frame around the motor.
sorry about the video cut out. As I I said in the disclaimer, I was learning as I went. I am not a pro.
The video cuts off right where im having an issue. Wouldve been nice to have that part included. Frame is blocking the secondary from comin off
Thanks for watching, sorry about that, the batteries died in the camera. did not know it until I went to shut the camera of.
I finally got it off I had to use a slide hammer because the one way bearing was locked up thanks for the help though
MY pleasure, happy you got it. Thanks for watching.
How did you get the secondary out
Check the previous reply. Thank you for watching.
Did you ever post the next vid?
Yup, iis on there should be the next video. Thanks for wayching
:watches to see how he gets the secondary out as mine hits the frame and will never come out that way
: "as you can see I have the secondary out....."
What do you mean my age? I was young when I did the video. ( younger than I am now, just turned 67.)
thanks
Rhino Rider. Do u know where i can get the wet clutch cover cover at for the 660 rhino.
Rhino Rider can u call me at 5412121557
Do you live in the states? if you live in Canada, try parts discounter.I just checked , they have wet clutch housing.partdiscounter.com/shop-by-make/yamaha.html?id=3&category=%3F&make=4&type=3&year=26&model=1619That is where I bought my clut5ch stuff from, a fraction of what the dealer was charging
I see by your area code you live in Oregon
Did you get the reply below? there is an internet address where you can get the clutch housing. Let me know if you have trouble. My email is don@laboursolutions.com. I do not know why it posted so far down.
How TF did he get the secondaryboff!
Thanks for watching, have to remove the crap above it.
Lift the motor with a bar. Not much
Sounded like ELO in the background.
Thanks for watching. It might be, I have all the top Billboard hits for each year from 70 thru to 79. I am not sure what would be playing any anytime, I just like the music.
trying to remove wet clutch cover I tapped the rod left right up and down still can't get it off
Is that while on the machine or the bench? my email is don@laboursolutions.com. If it's on the machine then you still have a screw in. Look way back on the right side. On the bench the cover will come off once you remove the oil seal and the cir clip.
Do you have 9 bolts in your hand from the cover? I think it is 9. If you have all the bolts then it is just the gasket that is sticking.
+Rhino Rider yeah I took them all out would the motor being locked up be a problem I'm using it for parts and I need the shaft for the one I got running
I don't think so, the shaft is separate
Was watching this and saw the comments. I have a 2008 700 and im not able to get the case off. Tried tapping and even the slide hammer. The case does slightly shift but doesnt come off. Any suggestions?
How do you get the front clutch off? The seat frame seems to be in the way.
You have to remove all of the shrouding infant and the tubes across the top. It does come out, you have to work at it. when I removed the primary it looked like I knew what I was doing. Not a chance. I had removed it 4 times due to my long learning curve. ( kept screwing up ) so it looks like It comes straight out. You have to work at it.
I ended up having to get a strap and lifting the engine to get the clearance to slide it off. Good video, I enjoyed it.
This dude talk to us .. Just show us like damn
thanks for watching
Lol