Yamaha Grizzly clutch tools and instructional
Vložit
- čas přidán 22. 03. 2015
- Learn how to use the right tools for the job when working on Grizzly clutches.
If interested in the tools direct message me or email gffsnorkels@outlook.com. Also see more info about the tools and the different applications they fit at / grizzlyclutchtools
Otherwise hope you learned something.
• Yamaha Grizzly - Servi... for updated instructional. - Auta a dopravní prostředky
I recently purchased these tools for my 08 Kodiak 450. The tools arrived on time and were excellent quality. The customer service was extremely professional. I strongly recommend this product. Thank you again.
I made a tool similar to a fan clutch wrench that goes into two opposing holes on the clutches cam plate. Works slick. Yours works well too looks like
Bought this recently to do some clutch work on a friends grizzly 700 and works great. Makes life easy and a safe way to work on these. Good price for all three pieces and well made and thought out. Online service and shipping was great. Thanks again.
How much??
Great video! Well done, a true thinking mans man..Do you offer a set for the 600 or the 660?
Lol. Thought someone might catch that. I did not make the video or am I in it. I get asked often about how to do this and what do you use to do it. Thought this was a good video to share. Grizzly Full Flow Snorkels makes these kits. They are very good and handy. Email him if interested.
BTW that torque wrench is calibrated for left and right hand threads. Using it to remove nuts is perfectly safe if not exceeding the upper torque limit. For instance that wrench is rated at 220 lbs. As long as it does not take more than 220 lbs force the wrench is not harmed at the 220 lb setting. If it was set at twenty pounds and removing something at 100 lbs there would be problems.
perfect tools thank you from rene to Germany
don't know if you still check this but I sent you a email, looking to see if still have clutch holding tools available.
I need too know how I can buy me one of these three piece clutch holder tool seats; I need it bad right now to finish working on my Yamaha
Hi Wesley, if you email gffsnorkels@outlook.com, he is fast on the email replies and will answer all your questions.
I need a set. How do I order them? Thank you!
Where can I find these tools for Suzuki kingquad 750s????
Is there a website I can order these throw. Or this all throw emails.
hello give me the lick to buy the tools plzz thank you
Handy tools but man, you don't use a torque wrench to undo stuff! Not unless you WANT it to loose its calibration.
not true. old myth.
torque wrench is used on both left and right hand threads
greetings from Canada , these look great to help make this job easier and safer, do you ship to Canada and how much?
Tom Partridge yes he does. he is actually in Manitoba! Order away! cheers
Tom Partridge Do u sell the tools and if so how much are they
Where do i order from???
@@loudelectronics I'm in Winnipeg, where can I buy a set? Thanks
Emailed you for a set of your tools!!
where can i get a rester tool
How do I order these tools
Nice.is it any plastic to change in the secondary clutch?
Nope. These are not Polaris. All metal for reliability.
@@tristandietrich1386 ok thanx.my old yamaha snowmobile has plastic buschings in secondary..im in to buy an grizzly now
Are these 3 tools still available to purchase? If so how/where? Thanks Mike
Yes they are. Please see video description. Feel free to email him for questions and ordering.
@@loudelectronics thankyou 👍
I need that tool...
How much do these tools run? Def interested
urban logger contact gffsnorkels@outlook.com for pricing. very reasonable and different packages available. version 2.0 is available now.
How many people have stripped out the clutch shaft threads?
It will happen if you don't torque nut down to spec. Or are using a non hardened shim.
I am interested in the tools but do not know how to contact you
Marty Price gffsnorkels@outlook.com
Loudelectronics o
As soon as I saw the torque wrench being used to undo the nuts I started shakin me head!
trialnterror just an FYI a torque wrench can be used to loosen if it ratchets both ways and torque setting is higher than torque of the nut.
loudelectronics What ever makes you feel better buddie!
its true, modern torque wrenches can be used in both directions, they are designed to torque right and left hand threads. what ruins calibration is not setting it back to zero for storage.
Jason Morehouse this is true
great video only wrong i found it's never use a torque wrench to loose a nut or bolt can be damages the calibration. torque wrenches are to tighten and torque ONLY
This is a myth. Many torque wrenches work both ways. If you set your wrench beyond what your breaking free, it is never a problem. Also if your wrench is only for right hand thread, feel free to break nuts free as it is locked and no calibration to worry about in that direction. Appreciate the concern and thanks for watching the video.
@@loudelectronics thanks to respond my opinion but never listen a torque wrench can torque any direction I own Mac, Matco Snap on and craftsman maybe if I can order a left thread torquing but they going to torque only one direction left i'm going to check with Snap on to see if can i get a dual direction one thanks
Every torque wrench I own torque both ways. They are very common. Very handy when you have threads that go both ways.
where would I buy this clutch tool set
justin sakuta where can I buy the tools
@@rodneygatson5979 no idea
How much are these and will you ship to Alaska?
david cook yes he ships world wide. I think they are $135 CDN.
How can I buy these tools I tried emailing u but it won’t work
Send me an email tcdietrich@outlook
Any links to buy the set ??
Please check the details of the video. Everything you need.
Where do I buy this?.
Gffsnorkels@outlook.com
Hallo ist das auch passen für secondary für smc jumbo 700?
Ich kann nicht garantieren, dass es zum Sec Jumbo passt. es wird, wenn sie die Kupplung des Grizzly 700 kopiert haben. Folgen Sie den Grizzly Clutch Tools auf Facebook. Senden Sie uns ein Bild von der Sekundarstufe und wir können Ihnen möglicherweise helfen.
Does it work on a yamaha kodiak 700...
rick ramirez yes it does.
i emailed you about the tools
Awesome!
K I want one how much ?
Please email gff for current pricing. Email is below video. I do not sell these. Just hosting video.
I emailed you about a set
It's actually not me that sells these. Buddy of mine does. It's his video. He will get back to you I am certain.
Do you sell these tools..
I do not. I provided the email in the details for the person that sells them.
Thank You for the response..
@@loudelectronics can u help me out I tried to email your buddy but says it won’t work I’m really interested in the tools
THESE NUTS!!
Are these still available?
@Gardnermcneil yes he still sells them.
Now that's doing the job right....There,s another clown on here that's got his shit on the floor beating on it and everything else...Smh..
That is how gffs does it!
That's what impact drivers are for.
For sure. Over tight then over loose. Most people using an impact do not torque them down enough though and then the clutches come apart at speed or belts get shredded. Cheap insurance for maintaining a long life and reliability of your clutches.
Where could i buy these tools at
Christopher please see info in video details. Use the email provided and he will het back to you promptly.