CBR led signal integrated mirror install !
Vložit
- čas přidán 14. 03. 2018
- In this video i will show you how to replace your honda cbr 300R mirrors with new integrated turn signals , not only will you be able to delete the stock turn indicators but also give your bike a better look !
Thanks for watching ,
Dont forget to subscribe :) ! - Auta a dopravní prostředky
Think the black disc you found is to put under your kickstand if you have to put it down on soft ground so it doesn't sink in. I got one after my safety course.
Thank you for the information !
You should always use these, especially in the summer on asphalt.
Lots of these bikes were switched to LED indicators, and the hyperflash corrected with load resistors. A far better and more efficient way of doing it is with an electronic relay like the one TST makes, which will flash at the proper speed regardless of the connected load.
That black disc is a footprint for your kickstand. Throw that down, then place your kickstand down on it, and you'll save your bike from sinking in to soft, summer-heated asphalt.
John Spoonemore Thank you for explaining !
I have these installed on my cbr 500 they work and blink but it blinks week any idea why?
You ever considered of using a tripod
I used to use tripods mainly before Go pro on my head , Difficult to set up tripods in certain angles.
What mirrors did you use?
I fitted them on my 954 and they are not bright enough.Cheap sh....As extra to your stock ones, yes.Also mirrors have short arms.
Can u keep the side blinker along with the mirror
A.R. Ahmad yes you can
Hey dude my side mirror light not function how to open this side mirror
They light stays on all the time ??
Nice made
Mind Made Design's - DIY Thank you.
Where did you get these and do they have ones that will fit a 2018 cbr500r
Ebay , you will have to check for your model.
Do you have the link of where you purchased it?
www.ebay.com/itm/Matte-Black-LED-Turn-Signal-Mirror-For-Honda-CBR250R-2011-2013-CBR500R-2012-2014-/142381986901?hash=item2126a0b455
My blinker harness has 3 wires and my new mirrors have 2 wires. How would you wire it. 2006 cbr 600rr
you have to check what those 3 wires are responsible for , start by finding the ground of the 3 wires in your harness and connect that to the mirror ground side , and then you can try around with the other 2 to find out which is power , It will be easier to figure out if you have a multimeter.
MuLife thanks for responding.
You are welcome.
Has anyone found a cover to fill in the holes left from the side indicators
I just got the flush mounts from TST to put there.
So you need an extra battery for the mirrors or what? I’m confused
Your question has confused me more
Will this thing work on any sportsbike? Yamaha r15 to be exact
I am not sure if they are unviersal since the mounting points/holes might be different from one bike to another.
@@MuLife gotcha! Thanks
Great job man, what year is this bike ? Also quick question.. you only need 1 load resister/ relay per bike correct? Or a separate one just for the side mirrors?
Kanger Texh its 2015 , i didnt install any resistor or relay from my end , could be that there is already stock in the harness.
MuLife okay awesome.. do you find that they are all a little short on the stems? I ordered a pair of eBay.. couldn’t even mount them on to my 15’ 500r.. probably sent me some junk mirrors
Kanger Texh what do you mean short on stems ? You mean the wires from the mirrors ? You can easily extend them by soldering or creating a connection point
MuLife what I meant was actually the length of the arms of the mirrors
@@kangertexh7700 I cant remember to be honest if it was the same length or shorter , but when riding it doesnt feel off. maybe the 500 have longer arms ?
Hey which mirrors are these? I really like them.
I bought them on Ebay , Just search mirror with integrated turn signals.
That black thing you took out of the battery holder is a kickstand plate. You put it under the kickstand when on soft terrain. Like at the beach.
for your kiickstand
Can anyone please let me know what the intro song is from!?
“Intro - the XX “
@@MuLife TY!
You installed these upside down. The pointy side should up be up.
Alex V how do you know?
I think i got the same ones and the pointy side is down
I put the point down as well but I've seen them up so wich ever way u prefer I'm guesing
Kick stand plate
Do you really need to solder them together?
Brendan Luo No you dont , you could either use connectors , solder , or any means to connect them together. Just make sure its solid connection and secured.
Foldable?
No its fixed , but if you loosen the screw you can swerve the whole arm in.
Kickstand pad
I came for my first bike not my first car 😫 I miss my rx8
Is that a diesel heater you're using in your garage LMFAO
Yes good old days haha , moved to a big shop now ;)
You could of put a load resister between the side mirrors and the positive and that way you wouldn't of needed to disconnect and remove the side indicators
I know i could , but the stock indicators look bad and i wanted to delete them. Thanks for the input though.
SCOTTYDP77 I'm thinking of doing that!! I want to keep mine! anyway you know of a video on how to? or possibly can explain?? would be appreciated brotha!
@@Zombi3s when you fit the side mirrors put a load resister inbetween your mirror wiring and the existing front indicator wiring and just connect the side mirror wiring to the existing front indicator bullet connector plugs it very easy look on line for a indicator load resister for your bike, but if you don't put a load resister and you just wire them in to the existing front indicators the mirror indicators will flash to fast this is when you will need the load resister I've put a link for load resisters below.
@@Zombi3s rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.co.uk%2Fulk%2Fitm%2F253030454743
@@SCOTTYDP77 there is also the option to change the relay...neat and easy job.Search for turn signal led relays...if ur bike has a hazard lights u need the four pin releay ,otherwise u need the 2 pin relay!!
you're recording is making me dizzy...sit still i can't see what's happening! lol
Sorry to hear , videos have been improved since then.
Wrong installed up side down
Jimil Maanaaden how do you know?