F250/Excursion Dash Swap Tips and Tricks!
Vložit
- čas přidán 8. 08. 2022
- Installation of a 2012 Super Duty King Ranch dash into a 2003 Ford F-350! A ton of information, including installing the SwapHelper.com Column Helper!
Products used in this swap:
www.swaphelper.com/product-pa...
www.swaphelper.com/product-pa...
www.swaphelper.com/product-pa...
Check out more of our products here: www.swaphelper.com/ - Auta a dopravní prostředky
Can't wait till I can afford to do this for my 2002
Super bro
Do any of the cluster display functions work? As far as the fuel economy and stuff like that. If not, is that functionality in the works?
Hey dudes, great swap!! Can a 2019 ford F-350 king ranch dash fit into a 2008 ford F-350 king ranch dash
I have a 2001 ford excursion 7.3 diesel, The factory gauge cluster don’t have a transmission temperature gauge, and has a dial odometer. But the 2002-2003 factory transmission temperature gauge, and a digital odometer. How can I swap to an 2002-2003 factory gauge cluster?
Keep doin vids
I have a 2012 for f250 I have the base model dash I want to upgrade my dash to a 2015 f250 dash is the swap compatible by chance
I can do an 08 or 16 interior swap in a 97 f350 right?
I have a 03 excursion that I am wanting to put a full interior of a 2011-2015 in.
We have a lot of information on our website, especially under the frequently asked questions section, you can check it out at www.swaphelper.com/faq
Question between the multi switches from a 99 and a 08 whats the difference besides style and plug type. They are both a 14 pinout setup. Im looking into the swap but I can't afford 500 for the column helper. And would rather just re-pin it.
They're massively different, there is no ability to repin them. That's what the Column Helper is for, it does all the conversion required to make it work.
@@SwapHelper That guy’s question is funny,. If everyone could just repin the connectors then why would people be buying a $800 swaphelper? I don’t get people sometimes. 🤣
I just got a mint cord excursion looking for sponsorship to build the hell out of it
Stupid question, but just to reiterate, in order to do a dash swap say for example a 2001 f250, I would need a frame the same year as newer dash being installed? The newer dash would not swap onto the stock frame for the 2001 f250?
Correct, you need the entire newer dash, not just the plastics.
@SwapHelper thank you for the response. I definitely look forward to buying your products and start this build.
does the frame from the 1999 get used or the 2016 dash
You have to have the newer frame
Is there a better way to install this dash without the mcnasty kit
Not sure what you mean, nothing from McNasty is required to install the dash, all the parts in this build were SwapHelper components, which are available on our website at www.swaphelper.com
Is there a way I can pick up the products in person after purchase? I’m also in Houston
Send us an email, contact@swaphelper.com
What transmission cable do you use the 08-10 or 99-04
08-10
What bezel did you use for the climate control and radio?
That's the stock 2012 King ranch dash center bezel. As mentioned towards the end of the video, it features our unreleased climate control bezel kit. It will be released sometime in the next few weeks.
@@SwapHelper would help if I paid attention to the whole thing 😂 looking forward to that coming out 👍🏼
Zf6 swapped 6.0 excursion will the cruise still work?
Of course
@@SwapHelper sweet I'm heading to Dallas In a hour to pickup a 6.0 excursion instead of swapping my v10 and will be putting 11-16 front end dash etc Into it along with a zf6 because I hate autos 😅 my 06 f350 has been good but I'd rather the knowledge the zf6 won't suddenly not move
How does one go about swapping the climate controls from a 99 with manual controls to the manual 08-10 controls in the video? Thanks
Those are not '08 to 10 manual HVAC controls shown in the video, those are 2005 to 2007 manual controls, they are plug and play with the '99 to 2004 trucks.
When will you support a 2006 super duty?
We already do, if you are a current Column Helper customer, which already supports up to 2007, you received your email to purchase an 05-07 Cluster Helper tonight. If you are not currently a Column Helper customer, regular ordering should open up in the next week or so.
@@SwapHelper thank you. I didn't see up to 2007 options on your website. I'll check back.
@@SwapHelper good day! I see the iPad mini in the 11-16 f250's and the ac/heat controls & all that will be controlled on the iPad after but I wanna do a Samsung instead and have only heard from a shop that the Samsung A 8.0 will work too,but I need to know if it will fit SURE lol....thanks!
@@5starlogistics426 that is unique to the 11 to 16 trucks, you're not going to be able to do that in a 2006. You will either have to keep your manual knobs or your EATC depending on how your truck was equipped from the factory.
@@SwapHelper just found out the Samsung s2 8.0 will work in 11-16 models.I don't do apple lol..THANKS FOR UR QUICK RESPONSE AND HELP.😤
What u charge to install one
We don't work on trucks, we only design, manufacture and sell products to assist with swaps.
This work for excursion 2000 ….?
Absolutely! The 1999 to 2001 Super Duty trucks and Excursions were the first vehicles supported, the products are available on our website at www.swaphelper.com/shop - I also recommend you check out the rest of the videos on our channel, and you will see a 2001 Excursion.
Will a 08 dash frame house a 2013-16 dash setup
Negative. Only the 11 and 12 plastics will fit on the 08 to 10 frame.
@@SwapHelper so a 2012 platinum plastics will fit then?
@@michaelward3700 any 2011 to 2012 Super Duty plastics will fit. FYI, there was no hump dash in 2012.
@@SwapHelper can you also a 11-16 dash frame with out any modifications as well or not really