Video není dostupné.
Omlouváme se.
Honda Goldwing GL1100 Alternator Stator Replacement Complete Guide
Vložit
- čas přidán 18. 05. 2019
- The alternator/stator is the number one FAIL on GL1100 engines!
IN THIS VIDEO We replace the alternator / stator with an upgraded aftermarket option and along the way remove and check the clutch friction disks and springs.
This video is a DIY aside to the full Goldwing Bobber build series. If you liked this check out the rest of the build for more DIY Goldwing videos!
Thanks for watching the video. I hope it was useful. Below are links to the parts and tools (or types of tools) I used in this video. I do earn money from any purchases made through the Amazon links and that money helps produce the videos on this channel. So if you need to buy something anyways, please, buy it through these links so we can make MORE VIDEOS!!
PARTS
Upgraded alternator/stator bit.ly/2w5YDX1
Full gasket kit amzn.to/2Yvd9Um
Clutch springs amzn.to/30tgxkz
Clutch friction disks amzn.to/2LUIMFF
TOOLS
26mm clutch tool amzn.to/2Hrhkel
Gasket remover amzn.to/2HoKzy9
Copper gasket coat amzn.to/2YDSkGf
Rubber hammer amzn.to/2EtxAd1
Torque wrench amzn.to/2EiUELj
Circlip pliers amzn.to/2EhmY0p
Impact screwdriver amzn.to/2EglgMS
Brass drift amzn.to/2M7KZxF
Thread locker amzn.to/2EjnV8N
Calipers amzn.to/2EgNMhu
Follow me on Twitter as I wrench and search for the next fun project (& money pit): @HooptieDoodle
#HooptieDoodle #BobberBuild #KeepOnWrenching
Alternator just went out on my 1984 GL1200 Standard. Great video! Clear and very instructive. Hooptie you're a great instructor and an amazing mechanic. I can't do a project like this but hate to sell my Big Girl as a project bike. Keep wrenching!
Yeah, it's unfortunate that the engine has to be removed to get to the alternator. They are cool bikes😎
Most excellent video. I know how hard it is to make and edit one. You speak with encouragement and authority in your voice. You make a very daunting job look like "Ed Everyman" could do it.Thank you!
Thank you for the kind words and best of luck if you're tackling this stator replacement
Really like this video and appreciate all the work you did to make it.
I have two comments regarding the alternator.
1. With the old stator it could clearly be seen that the cables from the stator came out underneath. When you put on the new stator the wires where shown on top. I really wonder how you managed to get the rotor over it on reassembly.
2. From what I have heard one of the reasons that the stator gets fried is the connection between the alternator and the rectifier/regulator. I understand that over the years one or more of the connector pins may corrode leading to an imbalance of the currents thru the stator. Some folks recommend cutting both connectors of and solder the leads together directly with some heat shrink tubing over it. That could be the reason why the old stator didn't have a plug attached.
I like the video but unless u need to change the clutch pack you don't have to take it out the whole rear housing will come off just saves a little time
I was thinking the same thing
Best video yet in the series! This was very well explained. You must be starting to see some light at the end of the tunnel.
Thanks, man! Video turned out longer than expected, but I am glad someone likes it 👍
@@HooptieDoodleJew ire up a firering system on goldwing 1100motorcycle
Great work man. Nice attention to details as well, measuring clutch disk and spring tolerances would be something most would easily neglect, well done. Nice to see someone following the measurements. Looks like we have similar content channels. All the best!
Well thank you kindly 👍. That mill lathe combo you've got looks pretty handy. I didn't know such combos existed.
@@HooptieDoodle It is very handy for small parts. I sent you a personal message on Reddit to invite you to a subreddit as well. All the best!
12.22.19. The Stator you installed was probably wound as a Delta, instead of Wye wound, thus slightly higher current output. A fresh Stator will put out around 70vac @3000 rpm between any two of the 3 phases. ( 1-2. 1-3. 2-3. ) ....... Wye wound.
Thanks man I just got ahold of a 82 I diagnosed it to be the alternator and part of the harness
Good luck🍀
Thank you kindly. Very thoughtful of you to make a video for folks. You rock!
These vids are an excellent resource for these bikes. I have a very small oil leak from that back part of the case but since I'm lazy I just used some rtv for the moment. This engine really makes me appreciate v twins and thumpers. These 4 bangers are smooth but so complex to service and get at all the bits. Most of the work i did on a 74 CB 550 I did with the engine in the frame
Yeah, I wouldn't mind having an engine that was easier to lift 💪
Fortunately on the 1200 you leave the clutch in and just pull the housing. I couldn’t help but notice you put the stator in backwards at first.. hopefully you turned it around.
Excellent video. Clear, to the point, no (terribly) distracting music. I imagine I could do that work myself, if I could only manage to get that big lump on an engine out of the frame!
Yeah, getting the engine out is the hard part, but ya know this isn't a triple, right? 😀 Great name. Gotta love a triple engle!
Don't need to mess with the clutch bro.
Also better change voltage regulator.
Hey man, unrelated to the video but I just learned the importance of burping the radiator after working on the cooling system of these. Just FYI ! 👍
Thanks for the heads up!
What a badass video. Thank you for the post.
did the stator end coming out of the case wiggle at all? Just did mine and there's a little play in it. It's seated all the way
I like your style. Keep it up.
I like the encouraging words - thanks a bunch!
These videos are great. Somebody shared your channel name on one of the Goldwing Facebook pages. I just did exhaust gaskets on my GL1100. What's the story on all the private videos in this playlist, though?
Glad to hear you like the videos. I was wondering when someone would notice the playlist :) Those are videos I've finished, but haven't published yet. Basically, I put out two videos per week in the build series (Tues/Fri) and at the moment I am ahead on filming, so for example, the video that comes out this Tuesday was actually filmed a couple weeks ago. The entire Goldwing build series will have more than 50 videos. Don't know how much more, but more. Thanks for watching and for the comment. It's interesting to hear how you found the channel. I hope your out enjoying some good riding weather.
@@HooptieDoodle Good to know. I just got back from riding my 'wing, and my wife was practicing for her license test on her 250 Rebel.
thanyou for good video
Is there anyway to change the alternator without taking the engine out? I'm about to buy this bike and it has a bad alternator and I'm just trying to figure out if I should flip it or put the money in to fix it and keep it?
This is one of those scenarios where the quickest (not easiest😀) way of getting things done is to remove the engine. The cover for the alternator is the same cover for the output shaft from the transmission that goes to the rear wheel and, the physics of that setup make engine removal necessary. Sorry for the bad news
Dude, those alternator conections are what kill the alternator. It is very common to rid the bike of the connector and solder the wires directly. You are basicly doing all that alternator work for naught.
I’m putting one in now and planned on hard wiring.
Superb video
The starter clutches are really bad on these bikes to gum up.I usually clean mine while engine out.
LOL!! Yeah, I noticed that later on and had to go back in a do the starter clutch. It's video #63 in this series. It's a great tip - and one I wish I had known when putting in the stator. Thanks!!
@@HooptieDoodle Yea I watched your video of course too late.But will help fellow wrenchers.Also they need to do alot of cleaning and checking while the engine is out.Clean the oil screen.Im doing the hydraulic clutch mod.These old hands hurt at times.Im building another going crazy on it car coil.altenator carb.
So I’m guessing the zip ties on that new stator are okay to keep on
I got my 77 goldwing but being disabled vet I can't ride it without modifications I can't even find parts i want to fully restore it
most excellent
thank you!
I wonder on what planet... They thought a 35 amp alternator on freaking touring bike would be a good idea...
I think you have done this before... you make it look too easy..lol
Yeah, like episode #3 or #4, I broke down the first Goldwing engine. This is engine #2. That thing people say about never buy a bike that doesn't run - they're right! 😂😭
@@HooptieDoodle question.... I've been watching all your videos and thank you for making them. Just curious. Is the stator cable suppose to be infront of the stator? I did mine exactly how you have it but I'm thinking it may not allow the stator to slide in correctly. Is it suppose to be wedge between the stator and crank case cover , instead?
@@67lnr80 at 9:50 in the video that stator is in wrong, with the cables coming out in front. It should be flipped so that they go out back towards the housing. I made a mistake ☹
@@HooptieDoodle ok awesome. I flipped mine. Seemed like there was a lot of slack towards the plug end that has the C clip. I pulled some slack outto minimize the excess between the stator and the crankcase cover. You think it will leak? Seems like it was sealed but then I pulled the cables thru a bit. Not sure if I should silicone it. Seems like it would be fine.
@@HooptieDoodle ohhh also I have an important question. Did you have to do some type if sequence pattern when tightening the crankcase cover and or clutch cover?
dude, disco sux! great vid, lousy muzak.
What a f'n nightmare!!!