Which Coilovers for your Torsion Bar Honda?
Vložit
- čas přidán 3. 09. 2023
- 84-87 Civic/CRX and 86-89 Integra drivers, take a look at these two coilover suspension options for your #torsionbarhonda
BC Racing features a front coil spring and full-length adjustment for extra height range, but us limited by fixed spring rates and upper mounts.
Medieval-Pro Tein dampers have shortened bodies and options for rear spring rates and custom valving but has a narrower height adjustment range.
BC Racing Link:
www.heeltoeauto.com/index.php...
Medieval-Pro by Tein Link:
www.heeltoeauto.com/index.php...
Medieval-Pro Combo:
www.heeltoeauto.com/index.php...
Adjustable Panhard Bar:
www.heeltoeauto.com/index.php...
Adjustable Upper Mounts/Camber Plates:
www.heeltoeauto.com/index.php... - Auta a dopravní prostředky
Love the video and the fact that there is somebody still providing infos for those rare cars. One question, have you any expirience with the sedans? Does the tein civic kit fit the sedan?
This helped me decide on what I want for my crx! Just ordered the bc racing!
Thank you! What was your order number? I'll toss in a t-shirt for you.
@@Heeltoe. 161846 thank you!! Size small! Got any sticker? I’ll throw them on the car
@@vdubadct73 we got you! Thanks for the order :)
Good comparison between the two systems.
Thank you! It'll be better when I get a real world driving comparison.
Man I really appreciate your videos are you from Washington
Thanks for watching! We are in Oregon.
Great info Marcus. On the BC do you find people have to change front wheel offset due to the presence of the coil spring. I could see that being a factor.
They don't really come back to tell me TBH. But if you have wheels that come close to the OEM damper I am sure you would need spacers with the BC Coils.
Just installed my BC coilovers today, didn’t know much about torsion bars before install until I was finished and watched all these videos. Has anyone ran without the torsion bars? I know in video you say it’s a choice, and I feel like with the new BC design it might be better to run w/o to obtain full performance of coil over? I just don’t want to go upon pulling them out and nothing them and installing them and still having pressure/resistance in front end other than the actual suspension itself. Thanks in advance.
Jury is out on it, I am planning an install and evaluation soon! Re-indexing may not sound like fun but it probably is the exact right thing to do.
Would y’all ship to France ? Is there any way I can contact you by email for more information? Thanks !
What rear spring rates would you recommend for the tein medieval pro kit for a tail happy street/canyon car?
Which chassis?
Just got some bc coilovers and notice that something is leaking grease on the passenger side any ideas what has grease down there it looks like it's pressured out I'm thinking the torsion bar adjustment? Is this a easy fix I want to get thicker torsion bars
Probably best to send a picture to us, email support@heeltoeauto.com
@@Heeltoe.Thanks ima get some good pictures and send them you're way thanks!
Video is black and only audio is working
The Tein with the right shipping choice and set up correctly certainly are. Do you find the BC not to be street friendly?
@Heeltoe. after listening to the video , I know realizing that the front index on the bars is most likely incorrect. I will wait till your front indexing video to figure out what I did wrong.
@@darksidegarage910 yeah that's a very big important one to do. Both kits need it. Are you having an issue where the front is too stiff?
Videos working for us, maybe reload or check again in a little bit?