RhinoAG EPIC 4125 Heavy Duty 12' Flex Wing Cutter - Cut Trees to 4" Diameter - Made in the USA
Vložit
- čas přidán 27. 08. 2024
- The Newest Member to the RhinoAG lineup of Flex Wing Rotary Cutters the NEW 12' 6" Cut Heavy Duty 4125 Flex Wing Cutter can knock down trees up to 4" in diameter. Minimum PTO HP needs of 50 PTO HP. 14,504 fpm Blade Tip Speed ready to cut big jobs down in size with the ability to cut in places larger cutters can't fit. Many Orchards are seeing benefits of the EPIC 4125 Cutter or cutting in Trees. Over built to perform for many many years. Born in Gibson City, Illinois USA. American Made with majority of American Steel. Yes there are components from other regions of the world used in assembly due to availability or only source of acquiring but RhinoAG try to use American Made when it can and EPIC 4125 continues that tradition as other manufacturers move production and sourcing outside the USA.
Learn More at: www.RhinoAG.com
Find your local dealer: www.rhinoag.co...
If in West Central Missouri near Kansas City come visit us at Vahrenberg Implement in Higginsville, Missouri. Or visit us online at: www.vahrenberg.com
Join us on Facebook: / vahrenbergimplement
Learn More on Our Information Resource Form: vitractorworld...
I do like that machine.
These are beast of a Cutter and been very good for us.
Now I just have to find a tractor I don’t mind running over a 4’’ tree with
You can back over them is the best way so you don't damage the tractor unless you have a custom built tractor with heavy skid plates.
Just in case you're doing a random comment giveaway of this rotary cutter, I figured I would comment HAHA!!! In all seriousness , that is a good looking piece of equipment. Fortunately for me, I don't have that much mowing to do. That 4707 is also very nice. I'll stick to my 2607H for now, though... Keep up the good work, sir!
We ran out of "Giveaway" Cutters last week...LOL
Thanks for the comments and your exactly correct the 2607H would make a great tractor for this cutter too or many of the other RhinoAG Rotary Cutters,
How do you operate the wings separately with only 2 hydro remotes ?
You T the two wings together to operate off one lever , together. Or add a Hydraulic Multiplier to create 3 Remotes.
That is quite a mower. I'll bet it's pricey but it should hold up very well.
Current List Price starts at $30,290.22 but you can buy for around $22,000 USD (5/31/2022) but it's Super Duty Cutter about $3,500 more than the TS12 and it's 1.5" Cut Capacity Machine. So it's not much higher with the vast capacity jump and extra 1/2' of cut.
@@VahrenbergImplement Thank you!
Will the 4075R John Deere with 75 engine hp it has I'm assuming it has approximately 60 maybe 65 pto.
John Deere 4075R says 60 PTO HP on their website. RhinoAG 4125 Minimum HP requirement is 60 PTO HP. So your right at the borderline for what this machines. Horsepower is normal rated on flat dry, firm ground. Personally like to see more than bare minimum HP to run the machine then have enough for tractor to pull up hills. I would probably look at the TS10 or TS12 and have plenty of HP to adequately run the machine then plenty for the tractor too.
Is the 4707 a good match for that size class flex wing mower? I have a 4707 and have been looking into a flex wing. Thanks for all the great videos.
We have sold several 12' Cutters with the Massey Ferguson 4707. Now with RhinoAG you have choice TS12 or the EPIC 4125 for 12' Cutters or we have had some use lighter duty like 2" to 3" Cut Capacity 15' Machines like RhinoAG 2150 or APEX 3150 Cutters for light duty mowing like clipping pastures.
What would I be able to pull with a 75 hp power unit
75 PTO HP or 75 Engine HP? Or tell me which model and I can research to tell you which models of cutters you can operate
The 4075R john deere.
John Deere 4075R says 60 PTO HP on their website. RhinoAG 4125 Minimum HP requirement is 60 PTO HP. So your right at the borderline for what this machines. Horsepower is normal rated on flat dry, firm ground. Personally like to see more than bare minimum HP to run the machine then have enough for tractor to pull up hills. I would probably look at the TS10 or TS12 and have plenty of HP to adequately run the machine then plenty for the tractor too.
How far back does the draw bar have to be to run on a smaller tractor
The Industry Standard for 540 PTO is 14" from end of PTO Shaft to the Center of Drawbar Hole. You Adjust Drawbar to match the PTO Shaft you are using. 540 PTO is 14", Small 1 3/8" 21 Spline 1000 PTO is 16" and Big 1 3/4" 20 Spline 1000 PTO is 20". RhinoAG makes it easy their is decal on the Right Front of the Machine that shows the Drawbar to PTO Measurement.
The specs on this machine are nearly identical to a 3150, not a 4150. Not sure how they came up with 4" cut capacity.
In Field Testing by RhinoAG Engineers is what determines cutting capacity. The bigger the width of cut the more strength is needed. Comparing 15' Cutters to 12.5' Cutters is not comparing apples to apples. This is Beast of 12.5' Cut mower. None like it on market today.
@@VahrenbergImplement Appreciate the reply. I agree it looks like a very nice cutter. This 3125 ftw!