I see many people having problems when installing these new LED turn signals and this is a very easy fix that can possibly save you guys alot of money by not having to go to an electrician
After making sure I followed the instructions is this video I still had hyperflash on my 96 gmt400. The solution was an LED flash relay. The specific relay that fixed it for me was Relay EP29 at AutoZone. After switching relays my led turn signals worked as intended.
I just bought & installed the EP29 Relay and also followed your suggestions on making sure the contacts were perfect, sure did fix the problem on my 98 Yukon thanks alot fam 🙏🎉
OMG, what a simple instruction left out of the directions, make sure nubs are in right slot. Fixed issue, the fast flash I solved by included resistor, but I may go the route of getting new Electronic Relay to not have to use them.
I have switch backs and like on the bulb the orange and white led lights are on when it’s it should only be the white led lights on the bulb any idea of how to fix ? Also it’s one only one side the other side work perfectly
This might have just saved me from returning mine on my 97 suburban, I can't load the instructions for some reason so I kept thinking you were to put in the original bulbs as well??
What LED headlight and turn signal kit did you buy? I also heard a good thing to do once you install external LEDs on these older truck is to buy a "Heavy Duty" flasher.
Hey bro I’d did that and they still flash super fast and I don’t know why. They flash normal with out the parking lights on. But when I turn on the parking lights they flash super fast when I turn on the signal please help me
@@Danny_rods i did, the minute I bought my 1992 chevrolet c1500 silverado with a 350 engine. 👍🏽 the engine in your truck doesn't magically convert it's make and model. Good day to you sir 👌🏽
After making sure I followed the instructions is this video I still had hyperflash on my 96 gmt400. The solution was an LED flash relay. The specific relay that fixed it for me was Relay EP29 at AutoZone. After switching relays my led turn signals worked as intended.
I got problem they must not be installed right keep killing my battery
What a life saver I had to remove all the dried up glue to see the slots
I just bought & installed the EP29 Relay and also followed your suggestions on making sure the contacts were perfect, sure did fix the problem on my 98 Yukon thanks alot fam 🙏🎉
OMG, what a simple instruction left out of the directions, make sure nubs are in right slot. Fixed issue, the fast flash I solved by included resistor, but I may go the route of getting new Electronic Relay to not have to use them.
Sick!! Thank you SO MUCH for this video!! would’ve never caught that and been struggling for weeks!
No worries at all haha ! It took me a while to figure it out
Same here
Me to till know thanks for the video
Thanks for the repair tip .led here we come on my 95 silverado
🦾🦾
Thank you! I was wandering how to install mine
Hope the video was helpful ! They’re bad ass looking lights
Dang bro nice whip cuh
Thanks bro !
Nice truck I would like to get a 454 ss sometime
Thank you ! I sold this a while back but there’s a bunch of pictures on it on my Instagram @danny_notchback
I installed some today and drivers side works good,the passenger side parking light doesn't, but the blinker works fine
Try upgrading to a heavy duty flasher if you haven't already , sometimes the load is too much for the stock one and some components won't work
Thank you bro I been frustrated for days trying to figure it out 🙏🏼
Yea man , I know I was when I couldn't figure it out
Same!
I went with euro signal lenses with amber leds looks clean er
What kind of headlights are does, I looking for those exact ones
I got them on eBay a long time ago , unfortunately I don't have a link or anything like that
Sometimes you need to take a small screwdriver and bend out the little copper leads inside the plug a little more so they make good contact.
Ive done what you said. But mine are still turn signal indicators are still illuminating in the dash, and the lights are flickering outside
Change the blinker/plug under the dash to a heavy duty one and you should be good
Get it from the parts store about 13 bucks
I have switch backs and like on the bulb the orange and white led lights are on when it’s it should only be the white led lights on the bulb any idea of how to fix ?
Also it’s one only one side the other side work perfectly
This might have just saved me from returning mine on my 97 suburban, I can't load the instructions for some reason so I kept thinking you were to put in the original bulbs as well??
Is there wiring required for the parking lights?
Brother you send me a lot of fkng headache I’m about to but the resistance devices
Haha now you can buy a mc chicken instead !
How you like those headlights with the black inside
I no longer own that truck , but they are my favorite headlights , make it look cleaner , more modern, and best of all more BLACK haha !
What kind of bumper is that? Looks nice!
Stock 454SS bumper pretty much an obs bumper except the valence has foglights, thank you for the compliment much appreciated !
@@Danny_rods thank you ! I have a 99 suburban and I been trying to find this bumper
What LED headlight and turn signal kit did you buy? I also heard a good thing to do once you install external LEDs on these older truck is to buy a "Heavy Duty" flasher.
So I bought one off of eBay,and yes I went ahead and replaced my flasher to a " heavy duty flasher " from the parts store
@@Danny_rods do you have the link for the heavy duty flasher?
Where did u get the light from
I got them from eBay !
Hey bro I’d did that and they still flash super fast and I don’t know why. They flash normal with out the parking lights on. But when I turn on the parking lights they flash super fast when I turn on the signal please help me
I had a set similar to these and when hooked up correctly according to the instructions my whole dash would flash with the signal
Do you have the link to those headlights?
where did you get them? and do they come with the LED bulbs in?
Amazon ANZO LED blinker and or parking light
You installed them on your c1500 WITH a 454. Lol engines don't have turn signals
Please do your research
@@Danny_rods i did, the minute I bought my 1992 chevrolet c1500 silverado with a 350 engine. 👍🏽 the engine in your truck doesn't magically convert it's make and model. Good day to you sir 👌🏽
🔥🔥😤
I would never buy these had a set leds burning out
Mine were fine had em on that truck for a couple months with no issues