Video není dostupné.
Omlouváme se.
RC4wd Edelbrock Accessories, V8 Swapping the C2X, Scale RC
Vložit
- čas přidán 20. 06. 2021
- Got the new RC4wd Edelbrock v8 accessory set, so I needed o put a V8 in something!, lol The C2X Gets V8 swapped!
store.rc4wd.co...
Check out my Amazon influencer store page for some of these products;
amzn.to/2NMKTtX
HOLY SMOKES!!!!!! Stumbled upon your Channel after looking for a scale C-10 Chevy truck build. WOW! Incredible detail and realism!!!! I love you shop set up and Will begin the steady stream of your video content!
I was looking at replicating my Hot Rod 84 Chevy Stepside! Now I have hope I just might be able to do it in scale and with Far More Detail! Then, the scale 1930s Dirt Track Race Car is next!
This is going to piss you off lol. The servo position issue is one of those so easy you miss the fix problems 😮. The fix is moving the servo mount to the bumper mount position. Add a spacer to the side that the shackle screw interferes with. Flip the horn 180° and viola fixed😊. I pondered the problem for about a month before I sat down and stared at it for about 10 minutes and realized that this was possible lol. But there's your fix because the front bumper mount isn't needed on the k5 blazer. Good luck and Peace ✌️
The details are very nice !~~pretty awesome!!👍👍👍😍😍
I bought the V8 dress kit the first day it came out. A little pricey, but what isn’t in this hobby lol. Thanks for the video
After watching you for years I have to say I appreciate the love and commitment you have to the hobby. When I built trucks in the full sized world I would've just took the hood off.. Build the inner fenders, power brake and the "Toyoda" reservoir would look great. Would have that got it running let's wheel it feel..👍
If you decide on the headers, maybe open headers coming up through the hood to go with the hole you already chopped in the hood. Maybe some oil smoke weathering from the exhaust on the cab to go with it. Just an idea.
Zoomies!
That's purrdy.! 😜
The bad news for you is RC4WD just released the TCI transmission WITH the over/underdrive transfer case ATTACHED to it! TODAY! I recently built a 2wd dually on a TF2 LWB frame with the TCI(R4) transmission and an 80 turn Gool RC motor. I also used the K44 rear axle and leafs. It's called "Project Towpig", and it's much too fast for towing so I ordered the 4:1 gear reducer and I think there's just enough room to not get a micro servo. I haven't decided on what to do about a scale engine yet. I really can't afford to get the RC4WD engine but I do need more weight up front. There are some nice looking engines with fans and ducts that clip onto the motor that I've been looking at. The body is a 3d printed '86 F150 that I added 3d printed fenders to make it a F350. I might add weight in a custom front bumper.
Looking awesome!!
Okay my mind is blown 🤯👨🚒 when I saw the thumbnail I thought I was looking at an actual shop I am now a subscriber and my old passion for remote control cars is re lit🔥 damn you 😂 maybe I can drive my old Traxxas rustler over to your shop with my Miss circus circus hydroplane in tow to get them serviced 👍
Wow that looks amazing👌💪👍
I need to rent one or two of your garage bays. Preferably one with lift in it. Really enjoy the content and the back drop. The drill press is absolutely key.
The hole in the hood is a perfect excuse for a big supercharger or a cowl hood lol
Badass man! Great video
I agree with you, things like the plug wires are a pain!! You're already done it's a moot point but for a similar build I used gel superglue. I left it to set for 2-3 seconds & put the wires in place. I tried using shrink tubing and could not get it to stay in place
Quality content
That's is the best C2X Hilux that I have ever seen, and it is also the frist one that I seen . Now it is even better. Really nice work and we need to see it out more. Hopefully this will help it out and add some mass to the front.
Wow very great work!!! 🙌🏻🙌🏻🍻😉👌🏻
130$ is insane for that. would be worth it MAYBE if it came with motor as well.
Yeah pretty awesome 🌟
I suggest to remove the hood completly and had some more accessoires i think it would improve the look of this nice motor
So is that technically a 35ci chevy😂. Cool build man.
Estupendo video sobre estos accesorios RC4wd Edelbrock, V8 intercambiando el C2X, respetos y saludos desde Venezuela.
💯💯💯💯🤜🔥🤛👍👍👍🙏🙏🙏💯💯💯💯
I love your channel. Everything you do is so satisfying.
Cool to think that you can buy 1.10th scale engine parts
Almost would have been easier to cram a small block in a real Toyota. The parts do look nice though.
Wow
I’m trying to find my little ranch take the bolts off of the intake, I have the velocity stat intake to put on mine can’t find that little tool to get the bolts out I have no idea what I did with it.
You should do a good scoop like roadkill put on their charger
What chassis is that on could it be modified to fit the scx10.3 ive only just come across your channel you do some awesome work fair play and you've gained a new subscriber looking forward to seeing more 👍 👌
Hi. This is the Rc4wd c2x. The v8 stuff wasn’t made for this truck but it can be adapted to a lot of rigs. Thanks for watching!
good afternoon to all. i have R/C truck that i need better instructions to put it together the model is a NO.C24K. does anyone know where to find the instructions? thanks for the help and have a great day.
Here ya go. cdn.shopify.com/s/files/1/0277/4692/6626/files/C24_KIT_C24-1_KIT_Eng.pdf?v=1617861389
Hey man just curious what scale this is and I would love to get into it
All my stuff is round about 1/10 scale
thats expensive for something that can be 3d printed for pennies on the dollar.....
Where did you get your tbirds??
From Rc4wd.com.
s..t man thats like over 400 bucks plus for 1/1O plastic motor come on man cant pay that for looks
All aluminum!