WOODLICIOUS!? - DIY PC Case | EVGA 1080ti FTW3 | Arctic Liquid Freezer 280
Vložit
- čas přidán 17. 04. 2022
- I go through the process of building my 2nd wooden ITX PC Case. There are several learnings/ impovements I have implemented from my previous wooden case. The overall design goal was similar to my previous case, clean case with minimal exposed screws, glass side panels to show off the components and cable management, all while not compromising too much with cooling performance.
1. Using mitred cuts to join the main frame together to have a seamless joint (no end grain showing)
2. Using 2 magnets to attach the glass panel onto the case. A thinner piece glued onto the glass means they are more robust (less likely to break off)
3. The height restriction of the CPU cooler in the previous case was a limitation to the CPU temperature. In this case, I implemented a design that could accomodate a thick 280mm AIO for more CPU cooling potential
The overall design goal was similar to my previous case, clean case with minimal exposed screws, glass side panels to show off the components and cable management, all while not compromising too much on cooling performance.
Parts:
- i5 10400F
- EVGA GTX 1080ti FTW3
- Asus Strix B460i
- Corsair Vengeance Pro RGB SL 32 GB (16x2)
- Arctic Liquid Freezer ii 280 ARGB
- Silverstone SX650G
--------------------------------------------------------------------------------------------------------------------------------------------------------
► Artist Attribution
Music By: "KaizanBlu"
Track Name: "4AM"
• Instagram - / kaizanblu
• SoundCloud - / kaizanblu
• Facebook - / kaizanblumusic
• TikTok - @kaizanblu vm.tiktok.com/aCYwfx/
• CZcams - czcams.com/channels/Utx.html...
• DOWNLOAD @ www.chilloutmedia.com/kaizanblu
Licence: Creative Commons Attribution-ShareAlike 4.0 International (CC BY-SA 4.0)
- Full licence here: creativecommons.org/licenses/...
• Music released by: Chill Out Records
► DOWNLOAD this track HERE - www.chilloutrecordsmusic.com/
► Artist Attribution
Music By: "Evol" Track Name: "Sleep Away"
• Instagram - / 1nlove.mp3
• SoundCloud - / inlove-sad-boy. .
Published by: Chill Out Records
- Source: goo.gl/fh3rEJ
License: Creative Commons Attribution-ShareAlike 4.0 International (CC BY-SA 4.0)
Full license here: creativecommons.org/licenses
► DOWNLOAD this track HERE - www.chilloutrecordsmusic.com/
• Music released by: Chill Out Records @ goo.gl/fh3rEJ
• (C) Copyright Notice: This is FREE (Royalty Free Music) that has been publicly released by Chill Out Records - No Copyright Music (Chill Out Records LLC) for use by content creators within their own CZcams and TikTok Musical.ly videos.
Licence: Creative Commons Attribution-ShareAlike 4.0 International (CC BY-SA 4.0)
►The exclusive footage used in this video is licensed to Chill Out Records by: Josh Tester HERE: czcams.com/channels/Qas.html...
Visit and SUBSCRIBE :)
Top SECRET VIDEO HERE: www.youtube.com/watch?v=2JZhO...
--- ♪♫ FREE DOWNLOAD ♫♪ ---
► DOWNLOAD this track HERE - www.chilloutrecordsmusic.com/
• (C) Copyright Notice: This is FREE royalty free music that has been released under the "Creative Commons Attribution 4.0 Unported "Share Alike" (CC BY-SA 4.0) license." Details about the license can be found HERE - creativecommons.org/licenses/...
- Disclaimer: The creative commons music featured in this video is original content being released under Chill Out Records LLC for use by other content creators in their own videos. You may use the music Chill Out Records shares but we kindly ask that you do not attempt to claim the music we publish as your own.
--- ♪♫ CHILL OUT RECORDS ♫♪ ---
I've watched a lot of computer assembly videos, but I've never seen your art, I really admire your excellent work, congratulations!!! It's a lot of art, Greetings from Chile.
Thank you very much!
Looks great! The one thing I'd change: The front "grill" with the honeycomb design would do well with a dust filter backing and magnets holding it in place, so you can easily detach it, clean it and put it back on. Other than that, this is a pretty awesome case.
Was going to say the same thing, but also to make it flush, rather than sinking the radiator flush. This could maybe still be done if there is room behind the rad, by printing some different brackets.
that case looks absolutely amazing, awesome craftsmanship !!
Thanks very much!
Great work! Looks amazing. Really showing how good a wood case can look when putting the effort into it.
Thank you very much! :)
Looks like you got an LTT bump. Great work... you're inspiring both woodworkers and PC builders at the same time!
Thank you for the support! 😊
Honestly man, that's one gorgeous PC case, such a beautiful look.
I could see by the video that you were in no hurry to make this, took care of every fine detail. Impressive.
Indeed I took my time haha, thanks!
Another excellent build. Such craftsmanship- you are to be congratulated young sir.
it looks beautiful and I have wanted to make something like this for a long time. the inner details are just perfect.
Beautiful piece of functional art!!! Well done!
Beautifully conceived, a masterpiece of measurements.
Thank you very much!
Great work man! Wooden PC Builds are really beautiful and underrated
Thanks very much! :)
I wouldn't call it DIY, because how many people could do what you just did? You truly are a craftsman!
A real labor of love. Nice work!
LOVE the radiator brackets - such a clever idea. Stunning build btw!!
Thank you! I am very pleased with those brackets hehe
@@mxcbuilds6633 hey I know that this video is a little old but do you sill happen to have the STLs for the brackets that you made for the cooler and the video card? I would like to build a case similar to it and was wondering if they were available anywhere
Wow this a one beautiful case and computer setup. I like the fact that it is stylish and simple looking at the same time.
Thank you! :)
truly inspirational showing what can be achieved with simple power hand tools; too many channels focusing on up-scaled tools achieving similar results; keep it up; had a great time watching.
[edit]: excellent video work and keeping the music in the back.
Thank you! I would love to make a build using CNC and more laser cutter work, but will have to make do with what I have at the moment
Thanks for showing us such a cool case! This is very inspirational!!
Thank you for watching! :)
Really impressing! I link how the front plywood is contrasting to the overall walnut. Everything came out beautifully!
Thank you! I'm glad you liked it. Consider subscribing for more content like this :D
Best channel I've discovered this year
Aww, thanks! Consider subbing so you won't miss the next video :D
What a gorgeous design. Well done!
Thank you!
Absolutely Amazing design!!!
Wooden PC cases are so nice, love it. Great work!
Thank you, glad you liked it. Please consider subscribing to see more content like this :))
@@mxcbuilds6633 Did that already :D Really looking forward for more stuff like this!
What a beautiful PC Build.
What a beautiful work! Well done
Thank you! :)
impressive design and craftsmanship
edit: first comment was made just a few minutes into watching this
having watched the whole thing I say: PHENOMENAL WORK!!!!
amazing
Thank you! Really appreciate that you watched the full video :))
that is stunning bud, you have mighty wood skills. well done.
Thank you, glad you liked it :))
Beautiful case. I hope you continue uploading videos on this channel
Thank you! I will try my best :) please support by subscribing
Absolutely stunning job!
Thank you! Glad you liked it :)
Looks awesome man! Well done 👌
That turned out great! Congrats! 🤩
Thank you! Glad you liked it :)
just found you channel and watched through many of your videos. I love the high level to detail. keep it up my friend ❤
Thank you for watching my videos!
You made it look so easy. Great job. If only there were places to buy wooden cases out there.
The magic of video editing haha, it was most definitely not easy...
An outfit canned nMEDIAPC used to sell one, they look like old radios. My two desktops are built in those cases. They are cool cases and I like them a lot, but they are nothing like this. The nMEDIAPC case is made out of some pressboard stuff, while the one MXC is building are works of art.
Beautifully done my friend. Thanks for the details I appreciate it.
Thanks for watching 😃
The case is flawless. The most unique thing, other than the wood is the GPU placement on the backside of the motherboard. I've been waiting to see someone do that!
Thanks for the kind words. But I can't take all this credit, there are actually many computer cases that have this same layout.
This is impressive. But the fact you used the tools that you did is very very impressive. Congratulations on seeing it through.
Thank you! I do wish I had a table saw and router table tho. Would open up more possibilities for my designs...soon soon
This is really amazing.
Amazing build man!
Love it! Cheers from Argentina 🇦🇷
Thank you!
a work of art. Reminds me of my Pioneer CS77A speakers 👏👏👏👏
Thank you! I searched up those speakers and they look sick!
Looks amazing fantastic job
Fantastic work! 🙌
Thank you! The 280 AIO is performing really well!
Great build, I love it. Just be careful with the dust
Thanks, will do!
This is a work of art.
Thank you! Please consider subbing for more content like this :)
Awesome job, looks great!
Thank you!
By the way, you have great professionalism at work with a great artistic touch
5:39 :)
this detail make so sense.
Look like a hard/smart work !
GG
Thanks!
Gorgeous 😍
The most amazing thing is that you are using just a hand saw and a Jig saw :) awesome job
Thank you! But I did get the front panel laser cut externally tho. 😅
So cool. Love it. Great job.
Thank you!
Beautiful work!
Thank you! Cheers!
Beautiful build my man!
Cheers! :)
the only case ill allow to use noctua fans with
Indeed...maybe one-day
Work of art
Beautiful job, te felicito.
One word: gorgeous
Two words: Thank you! :)
Amazing work. I want one.
Thank you! :D
Great work !
Thank you!
amazing stove
So cool and nice.
Thanks for sharing. Great video as well....👍
Glad you liked it! Consider subscribing for more content like this :)
That is a thing of beauty...
Thank you :))
You do nice work.
Thanks! Glad you like it :)
Que trabalho maravilhoso, você esta de parabens
Thank you!
This is amazing! 😍
Thank you! :))
Great job 👍
Thanks 👍
this is beautiful
Thank you!
Amazing! You’re a pro!
Thanks! Glad you liked it :)
Nice job!!
Thank you :)
work of art
Thank you :)
Отличная работа! Спасибо за видео)
Well done, from a Wood case lover ^^
Glad you liked it :)
this case is sick af
Thank you!
It's so good! If you come back to it and want to refine it a bit more, I'd suggest creating a recess for an LED strip that has a higher density so everything sits flush and defuses cleanly.
That's a great idea! At the time of building this case I didn't have a router to cut out a channel to fit led strips. Now I have...👀
Nice man, really nice.
Thank you!
Beautiful
Thank you! Cheers!
te quedo espectacular!
Thank you!
Amazing case!!!
Thank you!
Very nice! 👍
Thank you
That is a very pretty case
Thank you :))
great video , cool style & easy to watch & a classy build to boot ;)
Thanks for watching! Glad you liked it. Consider subscribing for more content :)
@@mxcbuilds6633 I already have 👍👍
Nice build🔥🔥🔥
Thank you! :))
Your sir are a legend!
Hahahah thanks bro! Love you
i think i saw this on a subreddit
holy fck this is amazing
Thank you very much! Please consider subscribing for more content like this. :D
Amazing Job~!!!
Thanks!
Really Awesome
Thank you! Cheers!
Hardwoods would be best for the areas that you are drilling small holes into. Beautiful case. I plan to do something like this in the future.
nice pc case u build bro
Friend, excellent work... the best PC Mod I've seen... it would be great if you could give us the link to download and see the 3D file in case any of us (including me) are motivated to do it too!!
Really nice work! ;)
Thank you! Please consider subscribing :))
Воууууу, шикарная работа !
Thank you
dude thats look awsome
Thanks
Very nice job dude! Detailed and spend some time on it to get it like that! I am also building a wood case, sort of a improved Nzxt h1 v2 model. Subbed to the channel, keep up the nice builds dude! 👋
Thanks! Best of luck with your build, looking forward to see the final outcome :)
very nice design and very clean 👍
I definitely will try building myself one out of wood
Thanks! Best of luck with your project
OMFG what a beautiful piece of art! I would sell my soul to the devil to have a case like this featured on my channel.
Thanks man
@@mxcbuilds6633 is this going into production?
Man, it's amazing. You should make an online store to sell this.
Been thinking about this for a long time. Just haven't had the time and knowledge to set one up nicely. In progress
Wonderful. Still waiting for your M-ATX + ATX PSU build. 😀
Thank you! Haha I guess im personally more interested in small form factor builds. So a full size project may not be anytime soon..:(
Hex design reminds me of Dell server front bezels and rack doors... cant say that is a good memory, but this looks quite nice!
It is a craftsmanship of the finest. One thing though I was not able to see if the AIO is a bit higher than the CPU - its important.
Thanks! Should be higher
Art..
would love to see some of your design process for all the custom mounts
I'll try to include more of them in my future videos ☺️