Interior / Stereo Upgrades EVERY Porsche 996 Needs!
Vložit
- čas přidán 4. 02. 2023
- I've never seen so many hack jobs and terrible mods on a vehicle, especially owned by a DOCTOR! Trying to undo and restore this 996, one broken item at a time. 30% like challenge = new exhaust!!
Thanks to Gentlebands for sponsoring this video: Get your ring here and use code matt25 for 25% off your order! bit.ly/3QGvIRQ
Get your Atoto head unit here:
1) Amazon store: www.amazon.com/atoto
2) S8 Standard 7-Inch Android Car Stereo: amzn.to/2YkJPBV
3) AC-HD03LR Backup Camera: amzn.to/36hDiMH
4) 6% discount code: ATOTOUS6 (valid date: 2022-12-07 10:00PST --2023-12-30 PST )
Radio install parts: Site contains affiliate links for which I may be compensated
Wiring harness: amzn.to/3RxeR4l
Dash kit: amzn.to/3HzTJ8S
Rennline Porsche Parts: www.rennline.com/?...
Short Shift Kit:
www.rennline.com/gt3-short-sh...
Carbon Fiber Arm Rests:
www.rennline.com/996-porsche-...
Carbon Fiber Door Sills:
www.rennline.com/carbon-fiber...
Shift Knob:
www.rennline.com/rennline-alu...
Floorboards:
www.rennline.com/porsche/996/...
Pedal Set:
www.rennline.com/rennline-ped...
Merch - www.boostedapexdesigns.com
Instagram - / matt13ross
Patreon - / boostedapex (early access to videos!)
Channel Perks: / @matt13ross
Sound/Music for videos: share.epidemicsound.com/dge6e8
Porsche Parts:
Alcantara Shift Boot: ebay.us/mLjsAB
LED Signal Relay: amzn.to/3EYun4t
License Plate LEDs: amzn.to/3V1fYdj
ABS Plastic Sheets: amzn.to/3UYpCNw
Fog Light LEDs: amzn.to/3E8AMbN
Turn Signal LEDs: amzn.to/3O8YMA0
High Temp Vacuum Hose Kit: amzn.to/3MHnpDi
Fuel Injection Hose Clamps: amzn.to/3CN9Bmp
Radium Fuel Pump Kit: amzn.to/3MiRRUb ebay.us/uZAFOj
Garage Upgrades:
Retractable Pressure Washer: amzn.to/3EgZmH1
LED Ceiling Lights (set of 6): amzn.to/36m00GP
LED Cabinet Lights (set of 3): amzn.to/3irLWhg
Quick Jacks: amzn.to/36gkqBc
Wall Cabinets: amzn.to/2TwigqJ
Wall Mount Power Tool Rack: amzn.to/3dNLHvc
Retractable Air Hose Reel: amzn.to/3D6tZyh
Welding:
AHP 203XI Tig Welder: amzn.to/3zH7Zs4
Yeswelder Plasma Cutter: amzn.to/3Iz6xLt
Yeswelder LYG-Q800D Helmet: amzn.to/3FgB9zO
Klutch Welding Table: amzn.to/3r4qqTK
Tillman Tig Gloves: amzn.to/3f7ErL4
Tig Torch Holder: amzn.to/3qbhWex
Deburr Tool: amzn.to/3tiBLSO
Other Tools / Gear I use:
Vevor 3 Ton Floor Jack: amzn.to/3kXkH2S
Husky Toolbox (white/black): amzn.to/2V1p9Av ebay.us/oYNmGv
Tekton Swivel Ratchets: amzn.to/3uLXdNs ebay.us/3MHh5k
S.W.A.G Band Saw Table: amzn.to/3ku3Mkh ebay.us/NiEypw
Hanging Extension Cord Reel: amzn.to/2RebLXQ ebay.us/8Yv1X3
Universal Step Drill Bit Set: amzn.to/3ag12TJ ebay.us/4IjhVr
Magnetic Vice Jaw Inserts: amzn.to/2ZmUXPs
Cordless Tools:
Milwaukee Right Angle Grinder: amzn.to/3BwUgFj ebay.us/bRXqAz
Ryobi 1/2 Impact: amzn.to/2UG03Yg ebay.us/3FvRVy
Ryobi 3/8 Power Ratchet: amzn.to/3yek85O ebay.us/4YviJx
Ryobi 1/4 Impact: amzn.to/2UDRVHD ebay.us/11aLy0
Ryobi Angle Grinder: amzn.to/3gnoCAQ ebay.us/W59ocA
Ryobi Drill: amzn.to/3DhyWV1 ebay.us/rqIhti - Auta a dopravní prostředky
The windshield wiper turning button is for adjusting the frequency of the wipers when in interval mode. Set the wiper stalk to interval, then turn the knob to adjust the frequency of the wiper.
are you german or is there a snake on your windshield??
what he said...it's for adjusting the speed of the intermittent wipe
Viper
@@stefaneulenstein Vhat in the vorld could hawe gone vrong vith my spelling? Here in Norvay both v and w are pronounced the same. Anyvay, I vas only trying to help😛
@@Rauhytta its all love
It always cracks me up how people destroy and ditch the $30K car, but keep the hundred-dollar amp, sub and tweeters. Can’t tell you how many times I’ve seen that.
I don't get it either!!
My first car was a 84' Saab 900 turbo. When it finally died I ended up getting more for the stereo head unit than actual vehicle in 1993.
@@randominternetuser2888I’d bet that your ole ‘84 Saab dang sure served & completed its duty
That knob is the wiper interval switch.
Keep it up man. Your a natural in front of camera. I enjoy your videos. Not taking yourself so seriously I can relate to that.
I had a base 997 a few years back with just the basic radio. I wanted to add an amp and subs like you. I ended up buying the factory sub box off eBay and mounting it in the rear so it looked like a factory install. I put the amp in the front where the factory disc changer usually is. It was a clean install and the factory subs actually sounded pretty good.
That's what I'm looking for!
@@matt13ross nice! I had to get some mounting hardware from AutoAtlanta as well. Overall it was an easy install.
Porsche still sells those factory speakers and they are surprisingly reasonably priced for their quality. Getting the ones in the dash out can be a pain but at least you don't have to do any modifications for reinstall.
Matt, this 996 should the called giver !! Just keeps dishing problems. Man you have some patience and love watching you smash the problems out. Keep it up champion
The giving never stops!! lol
Damn bro, you have massive patience dealing with that nest of wires. I hope the tool who screwed up your car watches your videos. Great video! How are you going to blend the different shades of yellow? Will you consider taking the seats to a leather upholsterer to have them reskinned with new under foam and leather?
Whole car is getting painted and yes, I want to redo the seats as well.
Keep it up man! Loving the videos 👏🏼
Hope you’ll pull the engine out in a future episode! I would like to see how clean the previous owner kept it lol. Will allow you to also see what condition it is in and if it’ll need any replacement parts!
That thought terrifies me lol.
Small tip for wiring stager where you put your connectors so that the harness doesn't have one big fat spot, keep crushing man gonna be a beauty when she's done (I also have an e36 that I'm swapping a v8 outta an old 540 into it lol)
Ah yes, I sometimes do that. Luckily here there is plenty of room for the wiring.
V8 E36 swaps FTW!
Great work Matt - keep going ...
Honestly ive used Ground Zero products with subwoofers and amps, can recommend!
Glad to see you went with the Atoto! Hope it works well👍
Top notch hackery with that wiring from the PO.
Fantastic video as always
Thank you!
I just caught up on this series this morning, such a good series
Thank you!
I think with the size you’re working with you could genuinely get everything you’d realistically want from an 8” or even 6” Sub with a small enclosure that could tuck very nicely into that car. 10” is pretty overkill for a well balanced system.
Good choice on the radio.
Awesome man!
Well found that new channel I was looking for ..an with tons of old vids ...the LS M3 build was badass ..I binged watched it already.. I really dig the 996 build great pick .. definitely a new fan
Glad you’re tuning in, thanks!
I'm gonna be honest, I've been subbed for a couple years now (I followed the colorado ZR2 build and did some of the same mods you made videos on) and the porche never really peaked my interest. But I've gotta say I plan on going back watching the series because of how entertaining it is to watch, and a lesson on how to properly own a car. Keep up the good work and good luck!
I’m glad you’re tuning back in, thanks!
Yea man. Idk what it is but I’m floored watching these videos. I do own a 996tt, so that certainly has something to do with it. I’m also learning a ton by watching so thanks Matt!
Keep up the great work pal
So the windscreen wiper rotary switch is for the time delay between your intermittent windscreen wipe. Hope that helps.
Such a messsss!!! Amazing the ton of patience to make that desaster be functional again, its admirable.
Great upgrade that i think every car must have today
Looking forward since a lot for the exhaust and hopefully blow off valves too!!
We're short on likes :(
you should check out solderstick wire connectors. All the ease of a wire butt connector with the added strength of solder.
Haven't heard of them, I'll check those out!
My mans saving old underprivileged Porsche💪
Trying!!
Nice install!
Thanks!
Front speakers are 3 piece components; dashboard is mid + tweeter, doors are woofers…factory amp drives the doors @ 2-ohms (wired in series), dashboard uses a resistor on the tweeters instead of a crossover.
I’m using a Soundstream PN5.640D amp and replaced factory dashboard and rears with co-ax speakers 🔊 (low end kickers for now) my door speakers were in good shape, dashboard and rears were falling apart.
4:54 admittedly was distracted.. but jumped 😂
That round thing is the rheostat to adjust the intermittent wipe, push the wiper stalk down and you can adjust the wipe interval. Do you know if it has the anti dazzle and rain sensing rear mirror?
That setup was 'fire' man! literally.
LOLOLOLOL
Intermittent wiper speed is that knob.
liked! full exhaust system would be sick.
Agreed! Short on likes though....
Atoto seems to be a badass unit. We've installed 2 so far on our work vans snd they are awesome
Good to hear! I love it so far.
I have that dial also, it makes the intermittent wipers change their frequency
Great upload Matt, progress with a lot of work from you, no doubt testing your patience with all the wiring and suspect grounding. Top job though, tick another one off the list.
Patience is running out!!
21:32 I went exactly the same way when I installed my backup cam on my 996.2 Carrera (4 or 5 years back - car already sold meanwhile). Funny you came up with the same idea. Removing all the panels and putting it all together again took me a few hours on a weekend. It was way much more work than I expected.
22:42 yes, keep it as it is... leave the original stuff as is... exactly how I did it, too (been there, done that)
If I buy another C2 (which is a possibility right now, I am thinking/ waiting for the proper car... which may also be a Porsche again) I would like to do a center console delete as it can be seen in some of the GT3 of that era.
TBH, if I would do a new headunit - I would go for the Porsche Solution (not sure what it is called, but there is one available exactly for 996 to update the radio/navi system). It has that OEM look I like... but if I did that, I couldnt do the center console delete (you need one slot for heater head unit). Yikes she said, thats what she said.
Keep them coming, I like this content (and makes me want a 996 again, too).
It was a lot of work running those wires for sure lol.
I recently put in the PCCM+ system from porsche, in my 996TT and used all the factory available parts. It cost over 1500$ but fully worth it for touchscreen modernization of the 986 & 996 platforms. I've heard they're doing the same system for the 955 cayenne
Great job editing and selecting music for your montages. I definitely noticed the difference vs. previous videos.
Thanks!
5:20 this rotary knob increases the Resting Intervals of windshield wiper operation (while wipers in 1st setting) when rotated counter-clockwise, the resting interval shortens as you rotate it clockwise. it works pretty well in my 996, but I got lucky & found a creampuff with only 62k & all receipts of service records that date back W’s POTUS era. cheers
Thanks!
Your video came on my autoplay and i could have swore it was Jason Sudeikis talking until i looked at the tv. Lol. Like the videos though. Glad i found a new channel.
😂 someone else said that too
I'd say Audio Control amps. One 5 channel should do it along with a kicker L7 10' sub. As far as the component speakers I would pick Focal or what ever favorite type you like as long as they have a in line crossover.
I gotta catch up on my speaker terms, crossovers, component.....yikes!! Confused lol
I did the double din upgrade, and getting the reverse camera cable routed is a nightmare of trim removal LOL. I went with a Pioneer head unit coupled with a small Pioneer sub behind the rear seats. (TS-WX130DA)
Yea that wire routing sucked!!
Look into some of the pocket amps to replace the factory amp. A few even have a dedicated sub channel. 10” ballzooka bass tube should work perfectly back on the parcel shelf.
Solid ideas!
I'm wondering who will be doing this on some CZcams channel to my old '86 Carrera... I removed the Ungo box security system and old speaker system, but did not have the patience to revise all the splices and poor connections that folks had made over the years under the dash for semi-deleted heater and AC controls, added and removed gauges, two old track timing systems, etc. You are doing an incredible job!
Thank you!
might want to put some rust stop on those self taper holes...
Just copped a hoodie. Appreciate the continued enthusiasm working on your busted 996. 😂 I feel the same way working on my M5 which the previous owner treated like a Civic.
Sorry civic homies. 🤷🏼♂️
Thanks for the purchase and support!!
That screw on screw action was something else
Nice eh??
What an overwhelming project. Cleaning up someone else's electric mess is a nightmare.
That’s for sure!!
I've got that same head unit, was going to suggest it for you, Atoto makes the best of the best without breaking the bank. I love my head unit, hope you will too!
So far I love it!
Impressive, a lot of work went into that I bet
Lots, plus lots more to go.
Well done diving into that wiring nonsense. At least its pretty easy to tell the difference between crappy aftermarket wiring and factory wiring.
Intermittent wiper adjustment knob
there should be an OEM sub behind the rear seat. I hope it wasn't removed by the pre-owner. If so, it's a good idea to get a used one and install it back. To keep your 996 to look cleaner and factory.
Nope, none there!
That would only be for the Bose stereo which this car did not seem to have.
Reminds me of my painful journey with my much missed 944 S2. That cars wiring was a nightmare but my wife bought me her when I was going through a very dark time. That car saved my life, although it also it also drove me mad
This car drives me nuts lol
Day 300 for my one year Audi S5 ownership and I am going through the exact same issues, from amazon mix matched ignition coils failing, to horrible aftermarket bumper LED;s wired to hid to horrible suspension mods making the car drive like a slammed civic. 3 weeks ago the rearview mirror fell off. upon inspection the backplate was installed wrong and is not flat anymore cant remount it. Exhaust started shaking the other day and found the right side was held by zip ties . lol man
Sounds exactly like this POS lol
enjoying this series. i have a 996 TT x50. what kind of speakers are you considering? i have a 996 and really want to upgrade the speakers.
Not sure yet!
You crushed the wiring! That was some of the worst I've seen. In for a full Ti exhaust.
I experienced this with my M5. When I purchased it, I knew the radio didn't work, and all the OEM harness was completely jacked. After about 2 years of putting it off and using a B/T speaker in the car (super jenky like)....I said I have to fix this. I purchased the entire audio harness for the car used, spent the entire day, cutting the harness, soldering, heat shrinking, pinning new plugs as needed, bought all the OEM speakers, amps, navi units, etc, and finally got the radio to work! It was a great feeling with a ton of work. The first road trip I took in it, being able to finally isten to music from the car's sound system was..."music to my ears" lol. Keep up the great work!
We truly couldn't care any less this video isn't about you
I def need better speakers now too.
Thanks for acknowledging my comment on previous video about soldering versus 🍑 connectors. 👨🏻🏭😂
Haha no prob!
I'm assuming that you said to not solder and to use connectors? 100% correct way to handle electrical connections in an automotive application. There are very good reasons that the automakers don't use soldering from the factory. It always blows my mind when people will swear by soldering.
My 2005 987 has its own sound system troubles. There's a bad ground somewhere causing alternator whine to come through the speakers. Normally I'd just ignore it and use Bluetooth headphones, but the aftermarket head unit in the car can't be turned off, so I get a constant whine that I can't fully filter out. I'm not looking forward to trying to track that down.
40% likes and you weld the titanium exhaust😁
Get those likes up boys and girls!!
HAHA, with my welding skills, YES!
Where did you get the magnetic phone mount (redline?) and how is it mounted to the car? It looks nice, id like to do the same setup.
Rennline.com
I can tell you my 12 Inch spare tire sub works fairly well. Not overpowering at all, but, it does not hit all levels of base. Does work if you just want a little something and it is well hidden.
You can hear it through the trunk?
@Matt Ross I have a 370z... I can definitely hear it outside of the car but it is NOT too loud. I don't rattle peoples houses if thsts something you need to know. Lol. I pull into the garage blaring it and the wife says she didn't hear me.
Do a slimline alpine subwoofer under the passenger seat (if it will fit)
I’m the tool who wired this mess, and I approve of this video. 😂😂
I’m sure I speak for many subscribers, instead of the “but” flash, maybe a rear shot of G/F ?
This was a really good video. Thanks for taking the time to shoot it. 👍🇨🇦
Seriously? You did this? 😂
Not sure if serious...lol
I got one for my 06 Cayman and only issue I had was that the wireless android auto didn't work so I had to update the firmware. I got the camera through the interior to the back just haven't mounted it yet. Overall pretty sweet stereo only issue is that my android auto doesn't get as loud as my radio station that goes 0 to 100 on the lowest volume setting lol
So far I've had no issues!
If I could like this twice I would
Appreciate that!!
For a great compact sub that's easy to connect, check out the Kicker Hideaway. They're a combination amp + sub (either 8" or 10"). They're super easy to hook up and sound great! I've got one in my car and also installed one in my son's truck. I live in Stillwater, OK and have quite a few friends who work for Kicker. Let me know if you'd like to get one. I can get you in touch with someone.
Gonna look that up, thanks!
you have way more patience than me that thing would have been on my back 40 burning if I had to figure out that rat's nest of wire. LOL
You don’t need a radio. Just put a Bluetooth sound bar behind the passenger seat and mount your phone on a magnet. You will have all the sound you need and your phone at your finger tips.
I need a radio for sure.
@@matt13ross of course you need a radio. But with this simple move you can stream radio, music, and whatever else you want to listen to. The sound from even cheap sound bars is equal to or better than the 20 year old speakers in the 996. Also much much less expensive than a new head unit and amp.
5:13, it's for intermittent wiping when you push the right stalk down (atleast for my 996.1), twist it all the way to the right and it's about 6 seconds between each wipe and that's the fastest it will go. In my opinion it's way too long for it to be the fastest setting 😂
Thanks!
I love my atoto radio in my Mustang. The only thing is you will need a subwoofer to get bass
Indeed, I need that!
@Matt Ross I got a mtx sub with kicker amplifier
This car is a complete mess and I love it. Great job Matt. You should definitely throw two 12’s in this car if you hit 50% likes lol
Thanks! Nah I don't want THAT much bass lol. Just a little bump.
I'm assuming you're seeing it as 4 front speakers as two tweeters and two door speakers. These can be on a crossover or a resistor could be in place. I'm assuming the factory amp would've worked as the crossover. If I were you I would run a resistor from the tweeters and run it to the main speaker then directly to the stereo and just bypass all that dodgy wiring remove all the amp wiring and just run all of your own. It Saves you all the fault finding time and you know it's all done properly.
That sounds very confusing lol. Research needed.
I have a stock exhaust on my 996 turbo, drones like crazy at low rpms
Really? I didn’t know that. I hate drone!
@@matt13ross looking forward to seeing what you do for a sub, I'm in the same situation. Took out a giant, broken sub box from mine when I got it.
Freddy Lewis makes a very affordable high quality SS exhaust that has essentially no drone. I have his 3" catless setup on my 997.1 turbo and even without the cats it barely has any drone. With cats it would be no drone. He uses an xpipe design with resonators and helmholtz tubes to eliminate drone
I once paid "professionals" at Circuit City to install a head unit, amps, speakers, and subs in a vehicle. They ran RCA cables from the head unit to the amps like they should, but then they ran speaker wire from the amps back to the factory radio harness in the dash to splice into the factory speaker wires 🤦♂ You just never know what you're going to get...
I feel like those were all kids working there lol.
@@matt13ross Probably part of the reason CC went out of business haha
I've either done my own audio work or the 2 times that I had professionals do the work I went to the 2 best high end shops in the area. I hacked up my cheaper vehicles because I was a broke kid and didn't care much about a few imperfections on those vehicles. But when I got a little older and had more money with nicer vehicles I saved up to get the top end equipment available then and I wanted to make sure that it was installed perfectly. I discovered that if I got a complete system from those shops and I had them do the installation that they give discounts if I asked for one. I got 25% off the system simply by asking.
@@sutherlacd27 Well, yeah, back when I paid for the installation at Circuit City, I was in college and ended up having to rewire everything myself anyway, so I learned very quickly the old adage, "you get what you pay for." Also, this was back when Circuit City was in business, so that should indicate how long ago this was lol
Do a steering wheel retrofit
Coming :)
Spliced in power and such instead of cutting the factory harness off is what I would guess.
Agreed, but harness were available....
With my luck, the hack who did the radio install would have been my wife's kid brother after I loaned him $20K to open his new radio install shop. I was probably his first and last customer and I cannot choke my $20K out of him because of being wife's brother. Then again, my wife would owe me $20K worth if silence. Money well spent!! 😄😄😄🍺
Oh and here is a like.👍Worse comes to worse, if the exhaust system is too expensive, may be you can fabricate an exhaust using high quality materials.
😂 😂 thanks for the like!! If I was a good fabricator I would make my own for sure.
A titanium exhaust is incredible no doubt. But I would suggest getting a quality SS exhaust from Freddy Lewis at a fraction of the price. Then use the thousands you saved to upgrade your clutch like we talked about before. You might even have enough money after the SS exhaust and clutch to get a tune from markski instead of getting the titanium exhaust.
Haven’t heard of Freddy Lewis. I’ll look that up, thanks!
@Matt Ross Lewis Speed in Brainerd....he did my exhaust. 1400 dollars shipped to my door for a 3 inch SS exhaust.
Looking for a good stereo for my 2010 Dodge Ram would you recommend the same brand. Really not a big stereo guy but enjoy my apple car play in my mustang so thought I’d upgrade my truck. Any advice is appreciated.
I like that it isn't just a radio, it's run on Android so you can do all sorts of things with it.
I like my pioneer avh 4200nex.
Total teardown and recheck everything. Otherwise your gonna repeat dismantling and reassembly continuously. If they messed with wiring your into loads of fun. Find the mic, easy. Follow the wire.
Highly recommend going with jl audio for the Amp and subwoofer for the long term solution. Slash series Amp and they make a really shallow 10 inch subwoofer that won't take up much space. Or you could look at the little 6.5" sub they offer. IMO nobody beats jl audio for sound quality.
I Highly recommend staying away from any of the bose crap. I don't know if the 996 had a bose system option from the factory or not. It came in my 997.1 though. And I am definitely not impressed. The bass note is pathetic and at higher volume the distortion is ridiculous. I want to rip out my bose crap and put in focal speakers for the component speakers and then do the shallow 10 inch jl audio sub with the jl audio Amp.
I ran 2 different jl setups in the past and both were incredibly impressive. Worth the price
Yes never been impressed with Bose.
Gut it
Noooo, this is a DD lol.
Just from the switch and image on the switch and the level of half ass mods done to this car I’d say it had a rear windshield wiper at some point and they probably just took the arm off and shoved the motor under the back shelf, left it in place or took it out and just cut off the wires and they’re back in there exposed sparking Everytime you hit the switch
Nah, the rear arm is still there and actually works!
If you can't drive without a radio, you need better exhaust! :D
I do need that!!
I don’t know how much you want to spend on the stereo but my recommendation would be Dynaudio speakers with a AudioControl DSP Amplifier
I'm not sure how much I want to spend either....lol
@@matt13ross so let’s start with some general questions:
Do you want good sound quality or amazing sound quality?
What type of music do you listen to?
Good is fine, I don’t need amazing. All kinds of music
You brought the most expensive broken 996 turbo in the USA. I should of sold you my TLC 996 turbo i had a year ago.
How much would you have sold it for?
@@matt13ross I sold my car for 32k
130k miles, lapis blue.. needed front wheel bearing, back window frame, and rebuild on the right turbo.
Kinda wish I didn’t sell it.
It was mostly stock up on options.
But not x50
@@mozzy4ktv277 damn that was a great price for whoever bought it
The like challenge is going well! But for how long will you wait before checking views to like ratio? Haha. Looking forward to seeing and healing a new titanium exhaust man.
We're short on the like challenge right now!
Titanium exhaust is several thousand dollars. It's awesome don't get me wrong. But for the price of a Titanium exhaust he can get a SS exhaust, intercoolers, and tuning. Might have money leftover even.
@@sutherlacd27 has anyone ever attempted a GT3 center exit exhaust on a turbo? I'm not sure if the layout allows it but it would be an interesting build. I've been wanting to convert my stock Carrera 2 996 to a GT3 center for a while.
Anyway it ends up seeing this car saved has been a great series and I've learned a good amount about my own 996 from it.
@@IanClos3 actually Freddy Lewis has a center cut exit on his 996 turbo.
@@IanClos3 by chance are you from Wisconsin?
In typical Matt Ross fashion...taking something and making it much better and doing it the way OE should have from the beginning! Hope you get the likes so you can upgrade the exhaust!
Thanks! We're short on likes right now though :(
@@matt13ross Damn Porsche guys not getting the "Likes" in. You know your BMW followers would have by now! That coming for a former 25 year 911 owner now BMW enthusiast.. 🤣😂🤣 If I could do more I would brother! Best channel out there!!!
@Matt Ross hit up Freddy Lewis for the most affordable quality exhaust.
GT2 badge was the first redflag.
You're not wrong! But the PO may have just left it on there because technically it has a GT2 wing.
@@matt13ross soooooo technically a lambo diablo is just a 300zx by that argument lol
No I mean he swapped on a GT2 wing / trunk and didn’t bother to remove the badge afterwards.
@@matt13ross hah i get it - just teasing. previous owner F'd everything up
Josh Hutchins titanium? If so, just do it, regardless of 30% lol.
I reached out to him but then he stopped replying 😞
@@matt13ross he's a solid vendor from everything I have seen. He might have simply missed your last message or forgot to reply.
LAST thing needed is a big glowing screen.
It's not big IMO. Very small compared to modern cars.
What year is your 996
2001
There’s not nearly enough swearing and rage in these videos to feel real.
I edit that out 😂
My god. it's jason bourne ;)
Like sent!
I'm definitely ordering a shirt or two ;)
great vid! thank so much! :)
Thanks! I hope you like the shirts!
Matt, it's not very interesting just watching you fix the wiring in fast motion without knowing what you are actually doing. It would be more interesting and helpful if you would explain your strategy for sorting out the wiring. I'm sure you are figuring it out on the fly but you could still explain how you are going about it.
I thought about doing a voice-over, maybe next time.
With the type of mods it had and the way it was all cheaply done, I bet this was a teenager who had some daddy/mommy money. Seen this a million times when it comes to teens doing mods themselves.
Possibly. The dealership told me a doctor owned it, maybe his child drove / modified it.
That or it was someone who won't spend a dime that he doesn't have to if he does the work himself. Plenty of guys who go so cheap on everything instead of doing things well.
the previous owner probably didnt do this.. He probably took it to some sound shop who hacked this car up.
That's my assumption, it's so bad....