How To Improve Blower GPU?
Vložit
- čas přidán 18. 04. 2023
- In this video I show how you can improve the Blower graphics card for your pc on the example of a video card from nvidia GTX 1080. Dell gpu blower
#diy #gold #pc #bild #howto #gpu # Blower - Věda a technologie
What is blud doing 💀💀💀
Fr 💀💀💀
lmao i approve of this video
That part where you noticed the thermal pads and the screams of rage....I laughed so hard. Thanks for the excellent vid
The comedy value of this video is as golden as that shroud.
One thing to note though, You need to raise the freq graph up with a positive offset and then cap the max voltage. By pulling graph down you're actually overvolting the freq below your cap, as seen by the lower portion of the curve against the stock curve
but is that a problem in practice if the lower portion of the curve only apples for low (idle?) frequencies?
I bought a 1080 Ti blower card and replaced the fan with a Raijintek Morpheus II cooler solution. Works great and keeps the card very cool - probably 20C cooler than the single fan.
Send me a link I made the mistake of buying a dell rtx 2070 super blower GPU
The price IS absurd man, people Who get blower gpus are not usually with the money to choose the best options... I have to find something affordable to cool my 2080ti without that ridiculously loud noise
Man, I can’t tell you how much I hate it when I’m working on something, and I have everything I need to take it apart and 1 singular screw strips causing me to have to fight it till it comes out. What I use to get stripped screws out is either the next size higher, a triangle bit or flat head, torx screw bits may also work for getting stripped screws out also if you don’t want to saw it out. Good video :)
I used to design sticker for blower gpu shroud, i think its looks cool
....Just brilliant ! 10/10
Surprisingly high quality video for a channel with so less subscribers.
Instant subscribe man, keep up your content!!!!
He did a decent job on the cinematography side of things but that paint job is atrocious.
He’s stealing video from another channel!
www.youtube.com/@user-gf9zf8pg9k
Even previews are the same, author, stop stealing videos
Great video
Such a good video
The number of tiny, time-wasting F-ups I've made fiddling with GPUs is staggering; I felt your pain
7:00 no thermal paste replacement after reopening GPU?
bro did you watch the video or just skip through? 5:31
he rather gives it an ugly paintjob
@@chrisslyi yeah but he opened the gpu again
Can you do the MSI RX Vega 56 Air Boost 8Gb OC card?
Next time you paint a GPU shroud, put it in the over for 30 mins, @60c. This will cure the paint to the touch. In a few days, it will be set.
You could just put there Arctic Accelero Extreme :D Just arrived some used 2080 Ti to me and guy sent me that Arctic cooler too. But after undervolting and some playing in Afterburner the temps are max 85 on hotspot with blower, so no use for Acellero yet.
On eBay you’re held accountable. Don’t want neutral or negative feedback for seller. That’s a death sentence!
Dell gets them from MSI for their XPS and Alienware computers. The Alienware ones have a backplate while the XPS ones do not. As far as I can tell it doesn't really matter much.
good video, but your explanation of the undervolting was pretty lacking
Well I am happy with one Asus 2060 super turbo
And this card it's loud
....my love of making shit 😅...that got you a subscriber
Haha It was looking perfect becore polishing It but i felt so identified with that kind of mistskes... I ve just got a blower 2080ti and i can't fucking believe the noise, i've only tweaked the fan speed in my previous gpus and i've always made the fan to spin at full speed when reached 70° and i never had more than 73° when long rendering periods (i dont use It for games) but now It Will exceed 80° in this intense processing periods... Well i've just tried the gpu for the first time, tomorrow i will explore It better...
This video is a fucking masterpiece
Haha can't believe you forgot the thermal pads 😫
The first paint job was very nice. The redo! Not so good.
blower cards sound cool tbh just ass 2 of them
Dude, I loved watching the video! Slava Ukraine!
Sigh... Remove the grill (and any extra material) from the GF card's case slot/cover thing already.
If it's satire, you got me pretty good lol. If not, please stop spreading misinformation
omg. that was not smoothe. "mirror finish" but its' just a series of visible scratches and you can't see anything on the surface. yikes
If you guys are looking for a good teardown video go watch the video above this one when you do the search. This one is absolutely stupid and very amateur. Other guy knows what hes doing
paint looks bad. gpu sanding is rough AF.
Holy.. u bought the worst custom design for a way to high price. Last year at the same time u could buy an GTX 1080 with good custom design on craigslist for 100 bucks.
And instead of doing some usefull mods like a coppermod, heatsink / backplate mod and adding liquid metal, u decided to simply give it an ugly paintjob.
Why are ukrainians like that?
But i have to give big props to ur video work. The quality is insanely good. But i hoped for a non-nonsense upgrade build.
But this is just useless.
i left a sub anyways in hopes to see the same quality but with nice builds