can't say I'd recommend their new engines without opening it up. Have seen first hand how bad some are and even the new parts I ordered when I built mine I had to return some 2 times before I got parts without burs on the bearings, rotor housing surface flaking etc. Unfortunately their quality control isn't what it used to be but when you do get good ones the product itself is great! Much more capable than most think.
@@AndrewDate Haha played as iMick / Mick, I would have been like 16, fun times, a lot of time spent on that game 🤣 I remember a guy called Slider, and Slyda, Aussie drift boys (ADB) there was another crew/team with purple in their tag also, those were the days, Fern Bay Gold Rev was where it was at
It's really interesting to see such a "USDM"/Aussie style FD build existing in Japan. Do other people kind of bug out on how different it is from most FD builds over there?
Assuming you mean engine/gearbox wise? I tried to do it the Japanese way and spent way too much time and money at popular rotary shops here only to leave me with 6 dead engines and not a single drift day 😅. It's very uncommon to see a self built rotary drift car in Japan and even the competitions I have been doing the only other rotary or rx7 competitors are fully prepared teams/dedicated shops. It's definitely the odd one out and with that brings alot of curiosity from people and even recently I took it to a shop here for a dyno rental with my tuner in Australia remote tuning online and they went from being very skeptical to very impressed with the car being fully tuned within a few runs with better results than they were expecting. The reliability this car has given with this combo gets compliments even from the piston competitors and I think is testament to all the technology advances and Omar from Raceonly's experience of really pushing and understanding these engines. Long story short it has the parts on it that we believe it NEEDS to do the job reliably and having tried both styles I 100% agree this is the only way to go.
I would say yes you can, with FC you will likely have your rear toe arms pressing into the floor before your coilovers are maxed out. For reference i still have a lot of room to lower the FD with them but to be fair my car isn't slammed.
@@AndrewDate okay thats awesome to hear, Im currently on a set of old cusco zero 2 and Id definitely like to save for a set of dg2. Would be nice to upgrade once and never feel a need to upgrade again
Any that are "unbreakable". Some of them are better than others, If you absolutely have to use them I'd probably go Rotary Aviation i had decent results with them. Unless you are intentionally being careless and it's a test engine or something, go Mazda oem 2pc.
I agree with the stock mazda engine philosophy ilia preaches this as well and motor lasted him 15+ years
can't say I'd recommend their new engines without opening it up. Have seen first hand how bad some are and even the new parts I ordered when I built mine I had to return some 2 times before I got parts without burs on the bearings, rotor housing surface flaking etc. Unfortunately their quality control isn't what it used to be but when you do get good ones the product itself is great! Much more capable than most think.
@@AndrewDate oh i didnt mean a stock crate engine. i just meant when rebuilding using mostly oem internals
The quality on these videos is awesome , camera work , audio everything great stuff guys
Quality and content of these vids is brilliant guys, definitely one of the best channels out there
Thank you! Plenty more to come!
This was great! The 7 sounds so good.
Happo looks so different in the day time
Loving the videos & updates mate, think we use to play LFS together 10+ years ago.
Looks like you are living the dream cheers
no way! what was your name on there? 😅
@@AndrewDate Haha played as iMick / Mick, I would have been like 16, fun times, a lot of time spent on that game 🤣 I remember a guy called Slider, and Slyda, Aussie drift boys (ADB) there was another crew/team with purple in their tag also, those were the days, Fern Bay Gold Rev was where it was at
@neoollierulz I remember! Some good memories for sure.
I agree with you I been running Mazda seals for 7 years 22 pound 515 hp gets beaten on 💪🏽
I know that road
It's really interesting to see such a "USDM"/Aussie style FD build existing in Japan. Do other people kind of bug out on how different it is from most FD builds over there?
Assuming you mean engine/gearbox wise? I tried to do it the Japanese way and spent way too much time and money at popular rotary shops here only to leave me with 6 dead engines and not a single drift day 😅. It's very uncommon to see a self built rotary drift car in Japan and even the competitions I have been doing the only other rotary or rx7 competitors are fully prepared teams/dedicated shops.
It's definitely the odd one out and with that brings alot of curiosity from people and even recently I took it to a shop here for a dyno rental with my tuner in Australia remote tuning online and they went from being very skeptical to very impressed with the car being fully tuned within a few runs with better results than they were expecting.
The reliability this car has given with this combo gets compliments even from the piston competitors and I think is testament to all the technology advances and Omar from Raceonly's experience of really pushing and understanding these engines.
Long story short it has the parts on it that we believe it NEEDS to do the job reliably and having tried both styles I 100% agree this is the only way to go.
Exhaust setup and material ? Sound awesome 😮
Turblown cast stainless manifold
G40-900 Turbo
Twin Turbosmart wastegates (Open)
3.5 inch stainless exhaust
1 AES 3.5inch muffler at the rear
So it's better to have it an oem apex seal rather than the after market one? Or is it better to have a 2 pieces instead 3 pieces
Oem only available in 2pc new, the early fd3s came with 3pc seals. I'm using oem Mazda 2pc 2mm apex seals.
Nice Build, what A/R are you running on the 6070G Hotside?
Thank you! It's the T4 1.06
@@AndrewDate Thanks Mate, hope to see the Car in Person at Autumn Matsuri :)
can you get really low on the dg5 coilovers? I've always been really interested in them for fc
I would say yes you can, with FC you will likely have your rear toe arms pressing into the floor before your coilovers are maxed out. For reference i still have a lot of room to lower the FD with them but to be fair my car isn't slammed.
@@AndrewDate okay thats awesome to hear, Im currently on a set of old cusco zero 2 and Id definitely like to save for a set of dg2. Would be nice to upgrade once and never feel a need to upgrade again
Not sure if I missed it, but what porting? bridge?
Half bridge! KMR Template
Who did you say tunes it? I have a Haltec 2500 in hand, but don’t know who to go with.
Omar @ Raceonly
What bendy apex seals are you referring to?
Any that are "unbreakable". Some of them are better than others, If you absolutely have to use them I'd probably go Rotary Aviation i had decent results with them. Unless you are intentionally being careless and it's a test engine or something, go Mazda oem 2pc.
Your car spec seems Similar to Apex D1 Project. Do you take an inspiration from it?
Visually yeah absolutely! I'm not a big fan of the very "gt" looking widebodys for fd3s so the vertex ridge is the best choice for me.