Very smart! I have met this problem for years, but it will cost a band each time. And a proper End cover is better!! I even have two Titanium Balls with a locking bolt, for the purpose, on my one, expensive bike.
Gen X'er here born in 1972. Spent my entire childhood riding bikes and that would've been the greatest hack ever!!! Finally something practical in a CZcams Short!!!
But about 40 years to late lol, I was turning them with vice grip heating it and some lead, it never loosen or broken after that, this trick is much simpler and fast.
Simply magnificent. You made my day even if it's not something I'm going to use immediately, they're one of the things worth seeing and learning. Thank you
Check the points where the cable is tightened. If they are frayed, the cable is getting closer to breaking. Also for the end staying in place - there are cable caps that exist exactly for this purpose. But if it's still a good cable, sure, this might fix it.
Ещё как вариант закреплаяешь тросс в шуруповёрт, нагреваешь горелкой тросс до красна и вклчаешь шуруповерт на вращение и вуаля, у тебя запаяный наконечник тросса)
This I have done on a throttle cable on road. మోటార్ సైకిల్ తోసుకుంటూ వెళుతున్న ఆయనను సహాయం కావాలా పెట్రోల్ ఏమైనా కావాలా అని అడిగితే... కేబుల్ ప్రోబ్లమ్ అన్నారు. అప్పుడు ఈ పని ఉపయోగపడింది...
On most bikes there is a little clip on the brake mechanism an inch underneath where the wire comes out, that clip is to hold the wire so it doesn’t stick out. You can see the clip in the video near the bottom
OK I'm impressed, for real.
Me too, this look like it would actually work and be useful
Yo también wtf
@@TheKaD23
Fiz isso no meus pelos pubianos e ficou rastafari
@@TheKaD23Who tf asked you to speak ! 💀
Soldering iron also, can be used....
yeah. and they could have replaced the cable, but that wasn't the point.
If he doesn't have it. He had to use other way
Doesn't work. Bcz its very hard metal lead couldn't past upon that part
He already has the zip tie out.
You will need other things, electricity, soldering iron, soldering stand, soldering lead😂 😂
Most practical thing I've seen on a CZcams short in years
Wow, thanks my friend 👋🤝 This is really important to me ❤️
@@Simple_Creativeliterally I thought this was gonna be another stupid idiotic CZcams short life hack but I was like wow fair enough that is great
最も、まともなライフハック
😂😂😂 انت تمزح
@@Simple_CreativeI guess that was sarcasm :)
Thank You 😊 This Really Worked Flawlessly. The Most Useful Short Ever Of This Year.
You're welcome my friend 👋🤝 I'm glad you liked it 👍❤️
Heat shrink the end works very good
Термоусадка здесь вообще не работает..
Соскальзывает сразу. Пробовал уже несколько раз
@@wrpweb4091 с клеем попробуй )
@@vadimv.6038 ещё скажи с лубрикантом..🤣🤣
The marine heat shrink with glue inside works well.
Name of that' sleeves ..Self adhesive
Bro you're so ultra clever man! 👏
Wow, thanks bro 🤝👋❤️❤️❤️
Oh, hell. I'm going to do this on more than just bike brake cables.
😢 great idea thanks for sharing😂!!!❤
I don't know if this comment is kinky or if it is just my dirty mind...
@@Sean-os2peHe didn't post the video!
Wow! That's really good!
I have finally seen a true repair hack. Something in the universe has happened!
Luar biasa..ini mmg sering terjadi dan akhirnya menemukan caranya..good good good 👍👍👍
Very smart! I have met this problem for years, but it will cost a band each time. And a proper End cover is better!! I even have two Titanium Balls with a locking bolt, for the purpose, on my one, expensive bike.
👍👋🤝❤️❤️❤️
I just did this and its amazing works perfect.
N. A S. A. Has been trying to call you !!! 😂
Very smart, wish I've knew this on younger days 😢😢.
Ya lo sabemos, también era ignorante, por eso todos somos importantes. Hasta pronto.
Very clever, usually I comee up with instant ideas too, on the cheap and poor side.
Wow this is actually helpful.
I'm glad you liked it 👋🤝❤️
😮
Must have been 12 years of my life. I got stung by that thing. Never thought to even try to fix it. I did cut it shorter
Gen X'er here born in 1972. Spent my entire childhood riding bikes and that would've been the greatest hack ever!!!
Finally something practical in a CZcams Short!!!
But about 40 years to late lol, I was turning them with vice grip heating it and some lead, it never loosen or broken after that, this trick is much simpler and fast.
Почему именно в 1972 году? Я 1969 года рождения и тоже провел всё детство и юность на велосипеде 😊
Simply magnificent. You made my day even if it's not something I'm going to use immediately, they're one of the things worth seeing and learning. Thank you
You know !!! I could have used that Amazing idea 45 years ago. Thank you.
Holy shit 😂 this is great thank you I'm going to use this now 💪
that's exactly what I said ... holy shit
Check the points where the cable is tightened. If they are frayed, the cable is getting closer to breaking. Also for the end staying in place - there are cable caps that exist exactly for this purpose. But if it's still a good cable, sure, this might fix it.
Im ready for all the bike repair professionals, electricians and plumbers comments now
I did bike repair for about 6 years professionally. Never seen this before but it’s a damn good idea
@@nicopaoletti3501came to say this. Usually you can twist em back by hand but this is cool
No worries there,, They'll be Swarming in with their ( Better) ways of doing it 😊
Nah that’s smart
They make crimp ends for that
*SKILLS,* man!!! THANKS for this!!
Ещё как вариант закреплаяешь тросс в шуруповёрт, нагреваешь горелкой тросс до красна и вклчаешь шуруповерт на вращение и вуаля, у тебя запаяный наконечник тросса)
Очень грамотное решение! Спасибо! Вот это действительно хорошо!
Благодарю 🤗👋🤝 Рад что понравилось 👋❤️
Есть намного лучше решение, завтра напишу, если не забуду, сегодня мне хреново)
@@Master_ot_god термоусадку надеть
Надо попробовать. Выглядит сомнительно, но кто его знает, может и получится.
👍🤝👋
Лучше на конец наверно термоусадка с клеевой основой, этот пластик отлетит со временем
Nejlépe zacínovat.
@@user-ui4un2pq1mнаконечник для эл.кабеля и обжать, стоит копейки
I was the unofficial bike mechanic in my neighborhood growing up and this was really cool. Hard to thread frayed cables into brakes and keepers etc.
👍👋🤝
Bravo pour l'astuce super
Thanks 👋🤝❤️
Excelente.. !! entre más se vive.. más se aprende.
💯👍🤝❤️❤️❤️
Damn. That's gangsta and simple as hell! Good job, big homie!!
Thanks bro 👋🤝 I'm glad you liked it 😊❤️
So finally we are here we have found the most valuable short to help us😊
Sending this to my cycling friends! Thank you!
👋🤝❤️❤️❤️
Nice!! I have used my fingers to rewrap the cable and then bend it so it runs closer to the brake caliper so it does not catch on anything.
That is a very useful and good idea.
Thanks my friend 🤝👋❤️
@@Simple_Creative you are welcome
Good idea!
Hilarious sound effects! 😂
This is actually amazing, first short tip I will actually use.
Если пальцами скрутить тросик, а потом надеть кусочек термоусадки и то толку больше
Крути руками, якщо не працює голова.
@@user-kh3im1qh5j сказал - как отрезал))
Как в воду пернул
Very good trick 💯
Thanks bro 🤝👋❤️
Thanks for the heads-up! Very useful.
Sekian lama nya baru tahu, ada ide baru lebih praktis merapikan nya Terima kasih thanks
Still an awesome hack!!!
Very clever! 👌
Thanks 👋🤝❤️❤️❤️
Very simple idea but very effective.
Jesus.
This may be the most impressed iv been this year.
I'm gobsmacked.
هي فكرة حلوة ومفيدة للتصليح الدراجة الهوائية 🚶♂️🚲
👋🤝❤️❤️❤️
Você é um gênio!
Ah, obrigado 🤗 estou satisfeito ☺️❤️❤️❤️
Я пальцами так закручивал, и запаявал конец оловом, но стяжкой будет удобнее! Благодарю!
I'm in awe! I have dealt with frayed wires constantly and this is a brilliant fix!
👋🤝❤️
Take the pin out of an appropriately sized rivet, place rivet head over end, crimp :) just thought of this then, would last rather than plastic
You lucked out and did an actually decent life hack
Oh thanks 🤗🤝❤️❤️❤️
This is the first ever serious short ive watched😂
Igazán praktikus megoldás! Köszönöm
It looks too good to be real
Crimp a ferrule on the end.
Do this is more fun
Pria yg kreatif akan menonton ini berulang ulang memang ide sederhana yang luar biasa...
специальные насадки продаются для этого, зажимается плоскогубцами😅
Actually a decent life hack ...well done!
Great idea.
Thanks 🤝👋 I'm glad you liked it 😊❤️
Good idea i needed already.😂
This is solved all the world's problems
Probably best to bend it out of the way
Thank🎉🎉🎉🎉🎉
AMAZING and FANTASTIC at the same time. ❤
Oh thanks my friend 👋🤝❤️
Now that is genius. Thank you have a great day.
Thanks my friend 👋🤝❤️
Пожалуйста, посмотри как режуться нормальные троса и повтори тоже самое при помощи шуруповерта и газовой горелки
The gap won't be that small, brother, it won't be able to turn that low.
This I have done on a throttle cable on road.
మోటార్ సైకిల్ తోసుకుంటూ వెళుతున్న ఆయనను సహాయం కావాలా పెట్రోల్ ఏమైనా కావాలా అని అడిగితే...
కేబుల్ ప్రోబ్లమ్ అన్నారు. అప్పుడు ఈ పని ఉపయోగపడింది...
Brings back happy memories from the 70's
Vale para las puntas abiertas del pelo!?
incluso para un barco de arrastre,
😂😂😂😂😂😂😂😂
Si tu as les cheveux qui fourche, fait des tresses . 😅😅😅😅😅😅😅
10 out of 10,Easy and fast way of securing a cable's ending, we'll done.
Bike repair shop owner for 30+ years. Please don't do this as it'll render your brakes useless and your front wheel could fall off.
I’ve been in the industry for 145+ years never had a wheel fall off from that
Lay the strands neatly and solder the ends.
That is actually so smart, I’m impressed
जैसा हमने सिखाया बैसा ही बना दिया ।बहुत अच्छे😊
Ok this is the smartest thing I've cone across on YT
Oh, thanks my friend 👋🤝 I'm very pleased☺️❤️
Very practical. You just earned a subscriber.
Thank you my friend and welcome 👋🤝❤️
I needed this hack so badly about 40 years ago.
Still useful AF 👍🏻
Awesome hack! 👍🏻
There are two devices already available in the market to do this job - one is called a human hand and the other is called a pliers!
Thanks, Bruv! Now I can fix the tips of my shoestrings!!
He's saving me thousands of dollars in repairs!
🤗😉👋🤝
Great hack for daddy’s to impress their kids.. I can hear it already
“My daddy knows everything!” 😂
Very nice never thought about that That's a very simple very easy method to keep your cables from being frayed and yes having to be replaced
👋🤝❤️❤️❤️
También pueden enrollar en sentido horario como lo hace solo con los dedos y luego si hacer eso o encintar con cinta aislante también,buen video 👍
Your bike stuff's just amazing!
Feel really happy for those who know that there is a simpler solution that exists and doesn't need zip tie or burning of toxic plastic. 🤫😂
On most bikes there is a little clip on the brake mechanism an inch underneath where the wire comes out, that clip is to hold the wire so it doesn’t stick out. You can see the clip in the video near the bottom
Crazy when common knowledge passes as a "hack" these days.
Thanks for teaching me this technique
Thank you! I think I have callous on my left from the front derailleur. I'll solder mine with metal. Thanks again!
What he did, was actually more difficult than simply twisting the wires by hand, and then curving them in
Thank you so much, it really helpful !
CZcams algorithm is 12 years late.
I just twist them back by hand.
Melting the plastic on the end is very clever indeed!
It’s the best thing I’ve seen on CZcams
you can also pull to end without removing , clip excess melt to ball
Legal mesmo my brother Deus abençoe sua vida sempre e família 🇧🇷😜👍🏾👍🏾
I'm going to have to try that. Great hack.
It’s magic! I can’t explain it!
Excelente improvisación. Ahora queda arreglarlo con un especialista