Watch This video Before You Buy the Ortur Laser Master 3
Vložit
- čas přidán 1. 08. 2022
- Buy the Ortur Laser Master 3: Use 50OLM3 (with $50 off)
US - s.zbanx.com/r/XiNUEbKCYNbh
EU - s.zbanx.com/r/YfN9zKV64nI2
Purchase from Sinis
s.zbanx.com/r/F3cUpEaf2V1P
Purchase from Madethebest.com
www.madethebest.com/products/...
Find my work at MoonpieCreations.com or email moonpiecreations2014@gmail.com for pricing
You can find links to the products I use here:
www.amazon.com/shop/moonpiecr...
More down here ↓↓↓ Click SHOW MORE!
Thanks to Total Boat - www.totalboat.com
Use Code Moonpie for 10% off
Thanks to Starbond - www.starbond.com/?rfsn=308130...
Use Code MPC15 for 15% off
Thanks to Ack's Wood Paste - ackswoodpaste.com/
Use Code Moon15 for 15% off
Lets Resin - letsresin.com/?ref=lh2wozftr3y
Use Code Resin5 for 5% off
Where can you find me?
Find my Facebook Page / moonpiecreations1
Find my Instagram / moonpie_creations
Find my Twitter / mpc_ken
* Some links may be affiliate or sponsor links. Purchasing or even clicking through these links will help support me and the content I provide for free. Thank you very much for your support!
#ortur #laser #engraving
Music: « song » from Bensound.com
DISCLAIMER: Please note that my channel is for entertainment purposes only. Don’t be stupid. You should NOT rely solely upon the information and techniques discussed and displayed in my channel. I am not a professional woodworker, wood turner or electrician and working with machinery and electricity can be dangerous. It is recommended that you fully research each technique and decide for yourself what the safest possible work method is for you. - Zábava
So glad to see you're healing up well. Always enjoy your videos and your reviews on tools
Thanks Matthew. I appreciate that.
Thanks Ken for the review. Been on the fence about getting one of these not any more. Will be ordering one this week thanks again. PS like your videos a lot.
What kind of work are you looking to do? Watch all three of my reviews if you haven't. It will show the best one for you. If you are having trouble deciding shoot me an email. moonpiecreation2014@gmail.com
Cool, this is looking like what I need next. I like the Ortur because it also accommodates a rotary stage
I just bought a roller. Gonna try it out this weekend.
Hello there, this was very interesting to watch, I can see how useful this laser would be. Some lovely results.
I hope your recovery is going well Mr Ken.
Thank you. Saw the doc today. One more month and I will know if I need surgery on my finger or not. But either way it's another month of recovery.
making me really want a laser. keep reviewing them so I know which one I will be getting myself for Christmas this year.
Haha, I think I'm done with lasers for now. Although I do have two other companies wanting me to review theirs now. 😟
Good afternoon, Ken.
Very interesting review. I was impressed with the river rock. Hard and not flat.
You and me both!
Wow! Enjoyed the review. Would never thought to engrave glass, slate and rocks with a desktop laser.
So much fun to do also.
Ken, be careful when engraving resins, most give off toxic gasses when they are heated by the engraver/cutter.
glad to see the fingers are getting better!!!
Absolutely.
Thanks for sharing. Still not convinced a Lazer is for me but it's nice to see what's out there.
Fair enough!
You guys crack me up. Great video.
Thank you 😁
You have the best like “look this silly thing I did” laugh (about the potato) 🤣 🥔
Haha, we had a good time with this video. I wish we could have put everything we did and said in it, but it would be four hours long.
@@MoonpieCreations I’d still watch it 😅 May take me a few days though lol
Great video, and that was a nice touch added to the steak !
Haha, I eat it.
That was neat, Ken. My favorite was the Yorkie Coozie. Phil Anderson has a Laserpecker to engrave his logo on his turnings while they're still on the lathe.
Bill.
Little out of my price range there.
Looks like yall had a blast testing the Laser.
We did at that. I'm trying to get Jeff to come back and turn a bowl for a video.
great video Ken! you're a riot to watch, I can only imagine being right there with ya! in regards to the laser that's a really nice machine I wish I could own!
I wish my wife felt the same lol. Those Christmas tree were hiding many beers. lol Of course the wife wasn't happy latter that night.
@@MoonpieCreations well ken if ya ever need just drop on by here 😉 all the wood provided, just bring beer 🍺 😎
@@MoonpieCreations ok, I was trying to figure out the random Christmas trees that kept moving. At first I thought this was a Christmas video you had brought back. 😂 Send prayers of healing your way. 🙏
Fun watching reviews. Get well soon.
Thanks
Too funny guys but very informative. I bought my Ortur LM3 Pro about 4 weeks back and couldn't be more pleased with it. The assembly is much easier if you follow the Ortur video. It took me about 20 mins to put together. I'm a newbie to laser engravers but despite this I was getting good results within a couple of hours of assembling the machine. I also like how robust the unit is without lots of cables hanging around. I'm just about to take delivery of the rotary unit and can't wait to give it a spin, literally! If Ortur are able to follow this up with an interchangeable 20 watt diode it will be the bee's knees for me.
Thank you so much for the awesome input. I hope you are having fun with that rotary. I started making Tumblers for my business and plan to step it up a bit soon and offer them on my Etsy page. I have to get a little better at designing and actually engraving on them.
Great fun, loved the Yorkie Mafia!!
Thanks Margaret....he has a front license plate that says Yorky Taxi. 😳
It's really. Interesting to see what a laser cutter can do, if I wasn't on a tight budget I would get 1 for some of the projects I do, I have had people ask me if I can engrave something like baby 1st Christmas or 1st Christmas together and lost out on many sales, Ken was a fun review watching you and your friend👍
Hey Alan, I totally under stand. All I can say is keep your eyes open for when the Aufero 2 is on sale again. They drop the price to under $200. I know that's still a lot of money though.
Thanks for sharing, very entertaining and informative. Especially what not to do…..♥️
You are so welcome!
Thank you for posting this video. Would you remember what the settings were when you engraved the stone?
Unfortunately I don not remember sorry.
Fun video. Nice review. Do you need to ventilate or use vacuum extraction to use this laser?
It did get smoky on my shop. So much so that I opened the garage door.
Great video. Just got the laser master 3. Did you do anything to the stainless steel before you marked it. Also what settings did you run for the stainless.
I did nothing, but make sure it's stainless. It all depends on what program you are using. I used Lightburn I used Speed 2000, Power1000.
I enjoyed watching the reviews of lasers even though I don’t own one to my dismay
Thank David.
Hello! Thank you so much for the video, it was great. I just had this machine and would really like to learn your opinion on engraving on rubber sheet. Can you help me with its settings and all?I will be using it for making stamps. Please help. Thank you so much!
Hey Katrina,
I haven't tried rubberr stamps yet, but my buddy has. He uses 1500 mm/min speed at 50% power with 508 dpi. he said also to check your ramps lengths. Should be about .17 I hope this helps
@@MoonpieCreations Thank you so much and more power! ☺️
Looks like a lot of fun. Something i can definitely use for what i do.Can't wait for the drawing for the last one you reviewed. When is the giveaway for the last one? Hope your doing well.
Hey Wade, the winner was announced Aug 1st. I'm hoping to have another giveaway soon.
@@MoonpieCreations you didn't have a video out on Aug 1st. Do you do this without notification to us.
@@MoonpieCreations I'm sorry. I miss spoke. Aug.1st Was just 2 days ago. I'm sure you planned on telling everyone. I don't make videos so I have no idea what it takes to put one together. Again, I do Apologize.
I think it’s important to note that the cutting was done without air assist.
That is true. Air Assist is a must as you get much better cuts.
Jsem rád že se zas smějete a máte dobrou náladu po tom úrazu. Byla by to škoda připravit se o skvělé videa a skvělé nápady.
Děkuji. Doufám, že se budu moci znovu otočit za měsíc.
Love seeing product reviews. Only issue I have is you have 15 lasers now 😂. Hoping to see someone send you something other than a laser to review soon. I do enjoy the reviews though. Waiting to see if you do a dogtag with this one 😜(hint hint).
Ok no dogtags, but the river rock was cool 😎
Haha, This laser was sent without me saying okay. They want me to do two more, ugh. I told them to get me a Robusto Lathe for review. lol. I am trying to get another 3d printer for review though. The one that uses liquids. BTW I will be doing a video where I compare all three of these to each other and tell you which I would recommend. It might come out next Monday.
@@MoonpieCreations yea would be nice to have a resin printer (liquid 3D printer), the prints come out without the lines you get with a filament printer. I have an Ender 3 Pro now and I do have some issues now and then, but over all it's the best one I've had so far. Anyway always nice to see your videos, and glad to see you're getting better.
Awesome time
Thank you
@@MoonpieCreations My Pleasure
Discount code on machine doesn’t seem to work.
Thanks
Sorry the $100 off deal ended on the 1st. It is $50 off now. The code is 50OLM3
Ps. Your friend did good. 😁
I know right! Although we had to retake a few scenes because he wasn't talking loud enough. But over all pretty good.
DUDE! That steak broke my heart.
Hahaha I see what you did there. Spoiler alert, I eat it.
I'm very interested in something that can both cook and cut my food at the same time. 🤔
Well what would you say if I told you you could have all that and more for 3 easy payments of $19.95......but wait!!!! There's more.
And do the dishes
Are you from sc?
I am. I live in Gaffney.
@@MoonpieCreations I'm in greer. Small world
I bought an ORTUR Master 3 LE in January, and it still does not work. I have sent loads of emails, videos, and photos, so they sent me a secondhand laser, which does not work either. Today 31/05/2023 and I have been ripped off by ORTUR.
Wow, that is very unfortunate. I found that when trouble shooting with a company based in China it is hard for them to help. Can I suggest you head over to The Louisiana Hobby Guy FB Group. I bet they can help trouble shoot a lot better. Most likely what you are experiencing someone else has had the same issue.
What’s up with the Christmas trees? Are y’all twins? 😂
Haha, you know why they were there.
Where are you located? I ask because Jeff was wearing a gamecock shirt at one point.
Gaffney SC.
@@MoonpieCreations I thought you may be in the Palmetto state. Come see us at Palmetto Woodturners. First Saturday of the month at 9 am. Mann Tool in West Columbia.
Saw the bandaids....hurt yourself again while you were on 'vacation' for a couple of days??
those are the band aids from a lapse in safety protocol about a month ago.
Haha, It happened June 9. Pretty bad incident. I was incident free on my vacation lol.
I thought I won something you demoed from you , but I never received it.
Not sure what you mean unless you are talking about my giveaway a video or two back. There was a scammer that came on trying to get money from people. But that was not my account and I quickly deleted him and so did CZcams.
@@MoonpieCreations yes it was for the give away.guess I didn’t win.
Just seems funny though that the message came from you that I was selected.
@@Bkrsdtr it was a spam account. Not me. They contact a few people. When you received that comment I hadn’t even picked a winner yet.
Well guys, you seem to be odd fellows. But you laser a good ham.
😂😂😂😂
How's your boo-boo doing Ken?
Healing up. Saw my hand surgeon today. I will know if I need surgery in a month.
@@MoonpieCreations
I hope no surgery is necessary but if it is be sure to get a 2nd & even 3rd opinion before you select the procedure & surgeon you feel confident with 😉👍 I'm in the medical field and can say that all surgeon's are not equally skilled so shop around after researching patient feedback & checking with the Board of Medicine for malpractice suits filed & what for 😉👍💖💞💖😊
@@RebekkaRN1962 yes ma’am. This is the best hand surgeon in the upstate SC area. She doesn’t want to do surgery but I may need what left of my middle finger nail removed. I cut the nail bed out of the middle of it. I missed the index finger.
@@MoonpieCreations
That doesn't sound like a risky but a beneficial surgery....glad you don't have any tendon, nerve or bone damage 👍