How to Drill a hole in a Glass Bottle | The Easy Way
Vložit
- čas přidán 7. 09. 2024
- In this video, we look at a way to drill a hole in a glass bottle.
Diamond core drill bits are perfect for the job.
The procedure is very simple:
Cover the bottle with water.
Use a cordless drill and a diamond drill bit to drill a hole.
For safety reasons, DO NOT use a drill with the cable.
(in case you drop it in the water)
You can use Instamorph moldable plastic to make a guide that will help you to drill a hole in exact point you wish.
------------------
Diamond Coated Drill Bits: ►amzn.to/1ISPaQw
Instamorph Moldable Plastic: ►amzn.to/1U0cRNh
My CZcams Setup ►amzn.to/2gutrvw
Tools I use ►amzn.to/2guylsx
------------------
Music:Kevin MacLeod
Title: Rollin at 5
Rollin at 5, Kevin MacLeod (incompetech.com)
Licensed under Creative Commons: By Attribution 3.0
creativecommons...
------------------
Warning: Use this video content at your own risk.
------------------
Every young stoner coming here like:
Easily the most simple tutorial for this task - especially for someone like me who has never used a drill before. Thank you. 😀
So yea, let's make a Bong :D
Same here xD
Yeah lol but i dont have glass bits :/
That's why I'm here!!!😂
+greengabe5 mmhmm
+Legal Help Exactly why i came here :DDDDD
Absolutely fantastic idea about the Instamold! Ingenious! Thanks. Best video yet about how to put a hole into a glass bottle.
The plastic drill guide is a brilliant idea!
+Franklyn F
Thank You!
This is THE BEST video I have seen. I needed a jig and this would work. Also I didn't think of submerging the whole bottle under water. That solves two problems.
I am glad you found it helpful. Cheers!
Had the drill bits, didn't think of the water - thanks!
Finally I can make it
That diamond hole saw is cool!
+Scrap wood City
Yes it is. I used to drill holes with another kind of drill bit.
goo.gl/vwwiwN
It is fine for the small holes. For the bigger ones, diamond hole saw is much better.
This is awesome. I had bought a glass bottle cutting kit and it included a diamond bit but I didn't even know what it was for until I found your video. This is exactly what I have been wanting to try for some time. Thanks for sharing.
I can finally make a bong
Lmaooo that’s why I’m here 6 years later gang😂
Awesome video. Way to think outside the box with that instamorph plastic and thanks for sharing. The only concern I have is about the water. Is there a preferred temperature? I know it's not an exact science but stating hot or cold would really help out. Thanks again!
I never pay attention to the temperature.
I like it on the cold side, but not too cold (so it's comfortable to hold the bottle)
Cheers!
This will come in handy if I want to make a custom PC cooling reservoir with a glass bottle. :D The crystal skull ones are pretty sweet. So far I've only seen two videos of such a reservoir running.
Instamold! My new friend!
we all here for one reason
Nice idea and great use of Insta morph 👍
+Irfan Ansari
Cheers!
Insta-morph huh? I'll have to get some of that. Thanks for sharing this tip!
Yes, it is awesome. Cheers!
Diamond drills. That makes much more sense
Never heard of instamold before.
I use very soft pressure and slow cutting as the cut is getting close to punching through, otherwise the back edge chips out.
Now you can make a bong really easily
+Jew Bacca
Yes, I guess I can.
awe yea
I have made a few bongs. I'd post pics if it would let me.
Good job man!!! Thank You.
Nice tip, thanks for sharing.
Thank you very halpful idea
I'm trying to do this bit from the top of the bottle downwards where the neck is, on a slightly more square bottle. Can I contact you?
Thank you
Good information
Where do get the mould stuff from
Using the guide so it doesn't slip is a good tip, thanks. I'm wondering what other drill bits would work, as I don't have any diamond ones. I've never cut glass or tile before, and probably won't ever do it again, so I'd rather avoid having to buy more bits if I can.
In in
now I'm no doctor, but having a basin of agitated water filled with glass dust sounds like something you should probably wear protective gloves for
Why?
Because glass dust can cut you
Nope.
i had a car window shatter by my face, glass dust can and will cut you. Had a couple pieces stuck in my forehead for weeks
No but you clearly do
Love it!
I like that!
great video!!
+TheCrazyIndianAssociation
Cheers!
How much instamorph do you use and how thick does it need to be for making the jig used for drilling holes in a wine bottle
Como haces para q no se quiebre el vidrio ?
Nice one. Could you show us, how to cut a bottle?
Thanks! I have a few bottle cutting videos already on this channel, but I am planning to make another one. Cheers!
Hello, Thank you for posting this video. I have a few questions for you. Do you recommend any particular brand of diamond core drill bit / hole saw? I realize that you are located in Spain and I am in the U.S.A. I don't know if we have access to the same brands of products or not. Also, how many holes are you typically able to drill with one of your drill bits before it gets dull or wears out? Finally, for decorating bottles with light strings, what diameter hole do you recommend? I was thinking around a 1" hole. Thank you for any information that you can provide. Take care, Matt
Hi Matt!
I used the same or similar kind of drill bits you can get on Amazon.com (link in description).
I got mine from China (aliexpress or eBay), but I believe that it's exactly the same products, just sold under a different brand name.
I don't know how many holes you can drill before they become dull. I am still using the same drill bit set I bought a year ago and it still does the job.
To be honest, I don't use them often.
It's hard to say about the best hole size for the string lights.
Only you know what look you are trying to achieve.
In my experience it's easier to drill many small holes in the bottle than many big holes.
1" hole is not too big and not too small, so it might be perfect. Then again, I don't know what exactly you are trying to do.
I think it's best if you get a diamond core drill bit set and play around.
Use a spare bottle to drill a few holes that are different size and see what you get.
Cheers!
Denny
NIce video mate!
How would you get the pieces out of a bottle with a narrow neck? Drill different size holes??
+Stevie Dass
You can get them out via the same hole.
The piece has to be twisted and then you can get it out.
Cheers!
+Shake the Future thanks. I should try that!
PLS HELP ME, I want to make a hole on a whisky bottle I have but I don't know if it's safe or if it's tempered glass, can someone tell me if it's safe and what bottles are made of what. Thx
A whisky bottle is definitely not tempered glass. Just regular un-tempered glass, and you should be able to cut a hole with a diamond hole saw as shown in the video.
in portuguese tag. ,,,, como fazer furo em garrafa de vidro put in title, thanks
Thank You!
Great video! But be careful with the glass chips/powder and your bare hands, glass that goes into the body is really not fun and could be harmful for your health! =( But other than that, great video, keep up the great work! =D
Yes, I was wearing the gloves at the beginning of the video, but then I forgot to wear them again :-) It's a bad habit I have. Luckily after cutting hundreds of bottles I have not cut my self badly. I had a few small cuts though. Cheers!
What type of drill bit you use to cut the glass. Can I drill a hole with masson bit of 6 mm.
No just go out and either buy a glass/tile drill bit it looks like a spade or a diamond hole saw don't be fooled by the diamond name it's not expensive
im here to make a dab rig lol
🇨🇺♥️🤠➕ Prueba usando un tubo de cobre como broca. Es un secreto del cristalero jorgito.
Hola, cual es el nombre de tu herramienta
Nice unique channel man :D
+MegaMetinMetin
Thank You!
MegaMetinMetin
I need the drill bit.
Well yeah it's easy with a drill and a diamond drill bit
+andresisawesome
It is, but not everybody know it. I have seen videos on youtube complicating the drilling procedure way too much. That's why I said the easy way :)
+Shake the Future exactly what I was looking for - I don't know shit about tools or cutting glass, you made it simple. Thanks. :)
will the bottle break easy ?
why does the drill have to be cordless?
+Tom Smith
In case you drop it in the water :)
Electricity and water is not a good combination.
Cordless drill will not kill you if you drop it in the water.
Well, you could also use a bench drill.
A HA HA HA HA
@@ShakeTheFuture If you are that clumsy, you shouldn't be using power tools of any type.
@@halibaitor Uhhh no. There's a shitload of reasons you could drop a drill, that have nothing to do with being clumsy.
COOL!!!
+Madeline Lee
Cheers!
Instamorph? What's even that? I have duck tape 😂
goooood
Can you do a how to make a disco light with this?
+FirstWorldProblems S
Disco light?! That would be interesting.
Thanks for the idea. I might give it a try one day.
+Shake the Future YYYYEEEESSSSSS
And where can we use the drilled bottle?
+yayJohn P
Here are some ideas:
czcams.com/video/M43zobB7PZ8/video.html
czcams.com/video/A4PnRGCvyRk/video.html
bong
can i do this in a mirror, too? i mean, it don't going to break in pieces?
you will need a flat surface which the mirror can rest on (so if it's a big mirror, better not do it in the sink, also there will be a higher risk to whichever container you end up using, seen as you could accidentally end up drilling a hole into it as well) then it should probably work.
He must be desperate for a drink. I would go out and buy a corkscrew.
No not at all ur dumb and many guys actually make bongs ect
Please make a video "How to drill a hole in wood"!
now i know
why you nead wholes in botle lights or what?
+crazy cat airsoft
Check out these:
czcams.com/video/A4PnRGCvyRk/video.html
czcams.com/video/M43zobB7PZ8/video.html
+Shake the Future thx man
for bongs duh
Yes, I am going to fill mine (it's a glass pitcher really) with a string of wonderful little lights and filling with pearl colored marbles. Don't have the bit yet, though. I want to put the "business" end of the lights outside the pitcher, thus the need for a hole.
facebook.com/thebottlemouse/
I thought he was to use science and magic. In a way, he did.
now I wanna play "Brain It On"
Where the hell do I get a diamond core drill bit? What about the instamorph, never heard of it before? How long does it take to make the curved plastic thingy? What do I use to make that?
Can’t I just send you my bottle?
+FreeAgent
There are links in the video description.
Instamorph is just a brand of a moldable plastic. There are other brands. Search for "moldable plastic" on eBay and you'll find other brand products.
To make the plastic guide, it will take you 10 - 15 min.
Cheers!
***** It is all good info, thanks, I learned some good stuff. My initial thought was I could use household things.
So I can’t send you my bottle (lol)?
Yeah... Drilling a hole in a bottle is a child's play... 😉
No kidding... I so badly wanna do it... But... 😔
By the way u just need 2 put a candle in ur drilled bottle!! With the all the holes that u drilled, light pouring out of them will look awesome. What say!?
🙏🏻 Mumbai India 🇮🇳
I say don't do that. No matter how cool it would look. The integrity of the glass is compromised from being cut, so adding a flame to an enclosed space will heat up enough to make the possibility of the glass exploding and causing severe injuries, and possibly even starting a fire, very real.
@@Kisha_can U r absolutely right!! Thanks 4 cautioning me 🙏🏻 But we do get glass artifacts that have holes all over them. They r especially made to light a candle inside them. Maybe those holes r made at the time those artifacts r being made!! So that makes them safe... 🙏🏻
🙏🏻 Mumbai India 🇮🇳
@@parikhspiecederesistance3958 Yes, and those bottles will also be made of glass that's been tested and shown to be safe to use for that purpose specifically. I hope you're doing well, be safe.🥰
@@Kisha_can Where r u from?? Will say u got a ♥ of gold...
& I hope u 2 r doing well & be safe 🥰
❤️ Mumbai India 🇮🇳
@@parikhspiecederesistance3958 Well, that was unexpected and a very kind thing to say. I appreciate it so much, and I actually needed to hear something like that more than I realized at the moment, so thank you so so much. You seem like a wonderful person. I'm Canadian, and other than having a bad week, I'm doing very well. ❤
hi
Place a few on your roof and hear your neighbours go insane
Oh shit time to hit up ace hardware
I have an AK-47 shaped bottle, gonna make a bong for the motherland
He sounds like Gru's brother
More like Christopher Walken
I got the wrong drill bit :(
You could use a plastic bottle as a guide as well.
yeah, you could even try cutting a rectangle out of a thicker plastic bottle, heating it with a hot air gun and forming it with the glass bottle.
You know, it might be hard for liquids to stay inside your bottle with all those holes.
Rip
Haber córtalo por la mitad la botella haber si no se quiebra
People be safe crazy but every store I got a drink in in flagstaff I had a whole in my water and soap Arizona be safe never harm Humanity
Tas' olvidao de poner el título en inglé' =O
+kl0xY
Lo hay tambien en ingles. La gente de paises donde hablan español, ven el titulo en español, el resto en ingles.
+Shake the Future Curioso, porque el resto los veo en inglés, salvo los dos últimos ahora que lo miro.. ty
+kl0xY Solo tengo los ultimos videos traducidos. Es una cosa nueva en CZcams. Puedes traducir titulos de videos.
+Shake the Future Si, lo supuse..
it's plastmake
+Daniel Boos
Yes, they are all the same. Many brands make it, but it's pretty much the same stuff.
Instamorph, Polymorph,Thermomorph, Plastimake etc.
Why would I need to make a hole in a bottle like lol😂😂😂
a bong
john travolta😭
Can I just smashhh the bottle to make jewelry?
Ur drilling the hole like ur drlling in a plastic bottle
bit misleading this video drilling one of the holes would take atleast 6 to 7 minutes witha lot of patience surely looks so easy when the video has been speeded up and also that bottle could break at any point glass is unpredictable wear some gloves pal you only get one pair of hands
Real easy way huh. Diamond bits are only $500 a piece
This is what I used:
$9.98 for 10Pcs
amzn.to/1ISPaQw
Yeah, guess he is not looking at the right place :) BTW Shae The Future, are yours the same as from that link?
How old are you??? 😂
yes because everyone can afford Diamond drill bits
they cost $20 and are available at any hardware store. you can drill holes easier with self centering bit
Can't afford a few bucks? Maybe browsing the internet isn't what you should be doing. Maybe looking for a job?