Xiaomi Townew T1 smart trash can - fixing no power & broken sealing heating wire
Vložit
- čas přidán 27. 07. 2024
- I believe it was 0.5mm kanthal wire but I ordered bunch of them and they came not labeled - all of that because my cheap caliper was giving me odd results - sorry.
- Věda a technologie
I've always been looking for this vdo.....exactly what I'm looking for! Whether this is gonna work in my case or not....thank you very much ^ ^.
Will try this soon :)
Did it work?
@electronic noob blog, we want to make a heatsealer trashbin, what do you recommend to use, in order to make this heatsealing.
I cannot get the mechanism that goes across the bag to co
Plate the task to cut it?? Any suggestions
Hey do you happened to know how to shorten range of IR sensor for this recycle bin? Mine is always open when I put it beneath table.
This is interesting question... I have no idea how device operate - it must emit IR so adding resistor should limit range. You can also try add something dark that will block part of IR like shade. But it's just idea - i would start from it.
Mine existing heating wire is not broken but sealing is no good, the opposite sealing tape seems have cut, do you know how to replace ?
My townew t1 can not open the lid but can seal(stick the bags),please can you give me some advise how I can fix it and what is the reason for this, as I changed the battery with new one.
Thank you in advance
Mine has a defective battery I guess. Depletes in a day but works otherwise. I keep it on charge all the time but is that dangerous in the long term? Could I remove the battery and use it as a wired device? Would it function? I could also replace the battery but it is not an issue to keep it connected for me.
BTW, appreciate the video. I had a chance to remove the cover easily and check the battery specs myself thanks to your video.
@@ekinkoc8683 Hey, 99,9% i'm positive You can leave it plugged without any problems. Just check do You have li-ion version or SLA like on this video. You can even try unplug battery (should be safer) because if it have short - constantly trying recharge it might cause fire hazard (if one cell is shorted).
You are welcome!
Hi, I have this Townew T1 dustbin but it has other issue compared to those which you have shared, the whole top cover will auto open after it has done the sealing but now, it cannot open after sealing so I do not know how to repair, can you advise and guide me?
Hey, just lid is not opening or this whole top part?
mines not sealing at all and it's new ....so disappointed
mine doesnt sense motion n open the lid. i have to open it manually. it does allow me to seal and replace the bag automatically. else i have to throw away the refills already. any way to fix the motion sensor part?
I also have unit's with this issue - but right now I don't have time to diagnose them (lot of other work) - quick idea start from making sure it's actually motion sensor (seems to be odd fault since it must be simple circuit) - when it's in automatic mode, moving hand will trigger LED lights. Force and open lid, move hand - see if led are glowing. If Yes - than motion sensor is OK and fault is in motor, driver of motor or gearbox.
I have the same issue as well. The LED light is lightup but the lid just dont open. Even if i press the button, the lid still dont move. Other than that the sealer is working fine.
I need help with the sensor not recognizing a hand pass over. It is a recent problem. I can open the lid with a press of the button. My bin will still seal the bag but does not realize I have removed the full bag of trash. It will continue to beep for removal. I turn the bin off and on as if for the first time. It will then suck the bag in.
hi sir, my trash can does not do much when i press button. lever attempts to move then stops, no fan noise. :(
I would check to manually spin all motors - maybe there is problem in some gearbox. It's impossible to pull valid diagnose basing on this description.
The battery might be dead and won't charge
My townew trash can cannot pull a new bag all it does is make noise then beeps then opens for me to push it down manually.
Check if fan is working properly if yes try different bags (maybe they are twisted inside and require to much force to be pulled out by vacuum)
My T1S doesn't seal the bags anymore, after 4 months only. There are 2 arms coming together to seal with heat, they usually come 2 times and hold while it's sealing. Now it comes only once and doesn't seal, just beep. And the lips remains open all the time. As soon as it closes, it reopens again. What can it be ?
If I would be You - I would just check tension on belts and try stick finger, start sealing process and see what force it can deliver on those arms - if barley nothing and belt is slipping than You have answer where look at problem. It's quite simple process they need touch limit switches - I don't remember how it was design but on some there is small metal tab - maybe it need bending because it hit to soon or to early.
@@ElectronicNoobBlog I think there is something else, because as soon as I turn the bin ON, the lid opens and remains like that. If I close it manually, the sensor doesn't work to open it.
@@remichina What happen when You press front button?
Press one time. The blue light turns off. Press again : it closes and open right away with blue light. (Like open lid mode)
I have been using this one since 2021 but recently I think it has battery problem. The sensor works fine, the lid can open/close normally but when I press the button to change the bag, it has a normal beep sound, then a weak motor noise, and nothing else happens.
Me too!!! Did you have any luck?
@@amyh6991 sadly no, I can't get the battery shipped to my country nor replace the battery myself 🥲 so I just using it manually as a normal trash bin with sensor lid now lol
Are You sure? That battery is SLA if I recall UN2800 so it's excepted from most shipping regulations?
The machine does not power up...Where should I check?
Start from fuse.
@@ElectronicNoobBlog I want to ask about FUSE Can you tell me your email?
Do you have gemmy industries 1999 big mouth billy bass singing fish sings for the holidays
I think I have -> czcams.com/video/CaAqtgRZjI8/video.html