Wood Screw Sizes Explained - A Beginners Guide
Vložit
- čas přidán 17. 05. 2024
- Wood screw sizes explained? Yes, it is a daunting task, but I took a lot of time to make this video for all you beginners looking to learn about wood screws. There are many sizes, types, and options out there, so hopefully you'll walk away today feeling more confident about the topic.
Traditional Wood Screw Size Chart:
Fraction/Decimal/Metric Conversion Chart:
Pitch (mm) to Threads Per Inch Conversion Chart: bit.ly/3lUKlke
Pre-drilling video: • Choosing The Right Siz...
0:00 Intro
0:12 Wood screw basics
3:41 Understanding screw numbers
5:12 Types of drives
6:07 Pre-drilling & correct screw depth
7:12 Six most common wood screw sizes
8:18 Seven non-traditional screws
10:23 Download charts
11:08 Outro
Affiliate links to tools and products I like and use (THANK YOU for supporting THA!)
----------------------------------------------------------------------------------------------------
HAND TOOLS:
Combination Square: amzn.to/2X79Cgb
Kreg Jig: amzn.to/2KLPvxY
Speed Square: amzn.to/31fv02z
End Cutting Pliers (they don't sell mine anymore): amzn.to/31hq1yt
Estwing Hammer: amzn.to/2VVnHMr
Chisel Set: amzn.to/2BjHH1H
Nail Set: amzn.to/2BdxCU4
Pry Bar Scraper (better then mine): amzn.to/2oGhKXu
Tape Measure: amzn.to/32gdEUt
15-Inch Utility Pry Bar: amzn.to/2IPlHQs
Level Set: amzn.to/33C56rD
STARBOND CA GLUES: bit.ly/3h0wWUz
POWER TOOLS:
Drill Combo Set: amzn.to/2nDsqFV
Jigsaw: amzn.to/2AGpGua
Porter Cable Belt Sander: amzn.to/38D3kJe
Circular Saw: amzn.to/2Pvto2C
D-Handle Router: amzn.to/2ol4mYx
Small Router: amzn.to/2nEjDUe
Plunge Router: amzn.to/2LK29yQ
----------------------------------------------------
Follow/Contact Me:
INSTAGRAM: / traininghandsacademy
FACEBOOK : / traininghandsacademy
EMAIL: josh@traininghandsacademy.com
Training Hands Academy
1441 New HWY 96 W STE 2 #411
Franklin TN 37064
---------------------------------------------------
My name is Josh Fedorka, and I’m the founder of Training Hands Academy™. I have been a carpenter and woodworker for over 25 years. I have also held certifications in home energy auditing and have built several LEED certified homes in New England.
God has gifted me with many “hands on” skills and it is my calling and purpose to share those skills by teaching others. Whether it is to seek a career in carpentry, become a general contractor or improve one’s DIY skills and knowledge, the motivation behind THA is to help others successfully learn how to work with their hands.
#woodscrewsizes #basics #traininghandsacademy
*Our beginners handheld routers course is now live! Check out the online course here ---> **bit.ly/3DcIeE3*
A 3 year old video but still super valuable! Extremely well done video!
Thanks for the comment!
Awesome video. You answered questions that I didn't even thing to ask.
Glad I could help!
Being an Immigrant to Québec, Canada (the french province), you showing both US/Can vs. EU (SI) measurements was just amazing.
*clapping hands in respect*
Finally ! Someone with the knowledge explaining things properly. I solute you my friend thank you.
You speak very clearly, witch is so convenient for me since i dont fully speak English.
So., Thank you!
Thank You for You AMAZING videos! Your explanations are exaustive, easy to follow and smooth! WOW! thx thx thx!!!! and again thx!
Much appreciated! If you want to support my work, please drop some more comments on my other videos! This helps to wake up the YT algorithms. :)
I truly never thought there would be so much to know about screws. Thanks for this. Very informative.
technology at its best. evolution for sure.
Excellent again. No waffle. And I like that you include metric in your talk.
A SUPERB video, especially helpful in providing head measurements and downloads. The worst thing about Philips head screws is the tendency of the driver to cam out. If I ruled the world, only square-drive and Torx would be allowed...the only ones that can be driven back out without using downward pressure, which is the last thing you want when trying to REMOVE them!🤗
Thanks for the comment.
Great video and I’m so glad you used the term “imperial system”. I’ve talked to so many people who have no idea what what imperial is until it’s explained. Lol
2 years ago and still helping! Thank you for your time.
Thank you for watching! I'm still here!
Thank you so much for the clear-up. I have been struggling with screws for the longest time and this video explains it absolutely well. . .
Thanks for posting this video. Although I have worked with screws a lot, there is always something new to learn!
This was excellent! Just the kind of tutorial I needed.
great video..def a lot of things i didn’t know about screws.. thank you!
Glad it was helpful, and thank you for the sub! Let me know if you have any questions as you watch more of my content.
@@TrainingHandsAcademy i’ve been watching some of your videos.. fantastic stuff..i actually thought i already subscribed to it.. glad I did.. keep up the great info!
Thank you Josh, This is awesome !
Fantastic Video, Very clear and helpful!
This is very helpful brother! Thanks a bunch!
Amazing video mate. And thanks for including metric measurements as well. Cheers from the UK!
Glad you liked it!
This video was very helpful. Thank you so much!
Glad it was helpful!
Really really informative video. Thank you so much!
To me your videos are much more, they are my Main Tools for my Learnings.
Sincerely;
DIN DON
Cheers!!
Good Information and thanks for the Charts.
Very helpful charts. Thank you very much for sharing them!
My pleasure!
Oh my goodness! Who knew they were measured differently depending on the type. I learned so much! Love your videos.
Thanks Julie!
Once again thanks for the video
Thank you, very informative.
Great video, excellent content. Many thanks
Great overview, I learned several new things, thanks! And, as others noted, touching both metric and Imperial scales is very helpful.
Thank you so much for the comment.
Great informative video , thank you
Good education, thanks!
Thank you for this very informative video. I learned a lot. Your videos are excellent and I appreciate the professional presentations. Looks like my future projects will require more screwing -around than usual. Thanks again and keep up the great work.
Thanks for the comment buddy!
Excellent video. Thanks for posting.
Our pleasure!
Such a great video. Thank you!
You are so welcome!
Great video.
One is never too old to learn.....thanks
Amen to that Robert!
So helpful! Thank you.
So glad!
Really helpful, thank you!
Glad to hear it!
I really appreciate your good information.
Thank you for the comment.
Thank you!
Really liking this channel!
Glad to hear that!
I’ve noticed that in the US you explicitly state the pitch for metric screws. It’s maybe because you are accustomed to do so for all other screws. Unless you need a special screw you use the default pitch (coarse) screw. So, M6 without any other number implies 1 mm pitch.
AWESOME/ WELL DONE video
Thanks for the visit
Thanks a lot!
Great video. Thanks for sharing
You bet
great video, Thanks
You bet
Gracias senior
Big Thank You!!!
Big You're welcome! :)
I remember this music, it was played on Radio City Liverpool by a DJ, Norman Thomas really nice man. He used to play it every day , in the background as he did requests and notifications. My dad used to love it and said to me one day who is that? so i wrote a letter to Norman and asked him. A week later a letter came back. We ordered it at the local record store in Huyton Village, And they got it for us. My dad nearly wore a hole in it, he played it all the time. He passed away 3 years ago, but when i heard the music a few days ago my eyes streamed with tears as i remember him
I'm sorry for your loss Jeff, but thankful you have some great memories of him. Thank you for sharing with me my friend.
The only link you need is a Machinery’s Hand Book (very expensive), but this video is specific & informative .
Thank you.
Welcome!
“Why because it has a big head, It can hold some pressure , but at the same time it has a flat enough profile that it’s not offensive”
Yeah I’m gonna have to steal this quote my guy, entirely out of context of course 😉😬👌
Thanks!
Thank you so much! Merry Christmas.
Thank You
You're welcome
Super!
Thanks for subscribing and watching. If you want to support my work, please drop some more comments on my other videos! This helps to wake up the YT algorithms. :)
@ 2:10 82 degrees? I'd love to know the rational behind this convention.
I seems more natural to consider the axis running down the center of the screw, lengthwise, as the reference vector and then call the angle 41 degrees.
Here in the UK Pozidrive is the most common type of screw. At the major stores that sell tools, building equipment etc pozidrive and torx (starhead) are the most common. Don't think I've seen philips screws being sold other than the ones that may be provided with flatpack furniture.
Wow, thanks for the info!
I love your videos and I would like to access such better tools at my carpentry workshop here in Uganda. How I wish you could guide me on how to get used tools at a better price. I just begun my small carpentry workshop which I would like to turn in an integrated youth and women Skilling centre at our home town in Busunga.
Praying God will make that happen... truly, I'm praying a believing He will make a way!
Now I need an automatic screw sorter.
That would be amazing! haha
What about using wood screws made from zinc for wood projects?
The vast majority of the screws I showed in this video were made of steel and zinc coated... which helps prevent rust. However, stainless steel and galvanized screws would be better for outdoor use... like those premium wood screws I showed towards the end. Does that help Muhammad?
it seems I'm locked into every Auto-language in CC there is but English. What do we do to alter this? Tried again in this video. It matters, as I have 3 different Language bases that watch this in our public school. At the present time it says we are Vietnamese (auto-generated) English. Want to watch as these are all very good. Just trying to make CC work for students.
So sorry Billy, not sure what is going on. Can you get other CZcams videos to work, or is it just mine?
MY package reads only 2 numbers: 12 x 3, I have no idea what size to drill the pilot hole, can anyone help?
Send me a picture of the package on IG.
But what is the origin of the gauge number?
I've been looking all around for an answer on my screw diameter question so I know that the # for the machine screw example you gave at 4:09 is not the GAUGE but the screw size which is based on major thread diameter, not gauge or AWG. A 6 gauge screw would be thicker than a 8 gauge screw. But the way screws are sized means that a #6 screw is thinner than a #8 screw. czcams.com/video/37o2DWse0bY/video.html
Screw sizes is one of those unnecessarily complex things: Why gauge 4 is 3mm? why not gauge 3 = 3mm?? And why do we need threads per length if we already have the length??
We should just use: shape/diameter/length/threads like this: *t/1.5/10/15* meaning: torx/1.5⌀/10mm/15 threads - that's easy and straightforward and doesn't require any memorization.
You get an A+
I'm assuming in the rest of the world, it's just mm metric standard. LOL
👌👌👌👌👍👍👍🤝🤝
The lesson is lacking. There’s no explanation on selecting a gauge. For example, if #8, #10, and #12 screws all have a 2-1/2 inch screw length option, which gauge should be used? I assume it depends on the weight of the joined materials and how few screws you want to use.
Yes, you got it.
You would be an excellent reference if only you were metric. Its not some people are metric it's only 350Mil are out of date.
Wait , why tf is US wire guage the reverse of screws? oh ffs
This guy makes me want him
Good information but too many commercials.
Sorry Eric... I don't have control over how many they show.
Get rid of the commercials so we can watch the video.
Am I supposed to know all this if I just want to find a screw to put my furniture back? Uhhh how men usually know these things
I can help if you want it. :)
@@TrainingHandsAcademy thanks, I have this cheap furniture made of particle board that were attached using plastic anchors and screws. Can I just use flathead screws? Or would it fall apart?
@@Zheta26 Yes, a flat head screw should work well and if you can find a course thread screw... that will hold much better in particle board. Hope that helps.
The only link you need is a Machinery’s Hand Book (very expensive), but this video is specific & informative .